The Best Chassis Ever.......

[Wrecker]

Originally Posted by Turblankas13

Where did u buy that chassis because i checked the bender site and its not there?

Yeah, the chassis is still a prototype. Bender will be sure to let everyone know when the production version becomes available. The last I heard it's at least a month or two out though.

[tmyjeeper]

I like the way you set up the servo. Where were all those pics taken? The last one sucks. You going to put a wench on that thing?

[rogman]

i think that chassis is junk

[BENDER]

Originally Posted by rogman

i think that chassis is junk

Care to explain oh wise one?

[666]

I'm not very wise, but I do know that the chassis being mentioned is not junk! I have seen it do things that seem impossiable. I have also personally seen it jump off of cliffs only to live for more!

What u got thats better?

[Rc EnthuSiasTs]

Originally Posted by rogman

i think that chassis is junk

WOW, i see you are a noob so i wont be too harsh, but you obviously do not know bender and his products, they are top of the line, he test all of his products before releasing them, and his chassis have won and competed in many comps.

[Wrecker]

Originally Posted by rogman

i think that chassis is junk

Yeah, keep telling yourself that while Benders chassis keep winning. You're just jealous.

Anyways, the servo plate drop bracket is tmyjeepers idea, thanks Tim. And that last crappy pic was Tim's handywork also, ....I wish I could take pictures that bad.

[TURTLE]

yeah, its goooood. duh. didnt you see the pics. of course i saw him disconnect the shocks from the chassis and glue the tires to the rocks.


at least i think im funny some times.

[Natedog]

Originally Posted by wrecker

Yeah, I spent prolly 30 minutes trying to feed it through and only get like 75% of the way. Let's just say I was getting a LITTLE frustrated!!! Then I got some safety wire, cut a really long piece and made it perfectly straigh. Then I fished that through (took maybe 2 seconds), electrical taped the rx wire to the other end and pulled it back through and tied a not in it so it would stay, perfect! That whole process took maybe 30 seconds, could have saved a half hour if I would have thought of that method first though.

I just use a sewing needle and thread...tie the thread to the end of the antenna and the other end to the needle eye...leave the thread a couple inches longer than the tubing and drop it down through...then just gently pull the antenna through.

[crawl rookie]

Originally Posted by rogman

i think that chassis is junk

This what he said on Unimogers SW3 thread;
*SW-3 Unimoger style, w/ front dig*
Views: 984
Posted By rogman
cool

dude that is pretty cool dont like the sw3 but it is cool

Hiha Waht a yerk he's indeed a jealous loser

---------------------------------------------------

I realy like the simple desing of the sw3 and the low COG,
Bender, if we buy a SW3 in the future can we get those slich delrin(bent) links as an option or not, I think those take the ths chassis to the next level
Nice Job and keep up the good work !!!

[dezfan]

Originally Posted by rogman

i think that chassis is junk

Wow, that's a bold statment!

[rogman]

done write tubers can blow the sw3 away but is my thoughts so next time i will kept to myself

[rogman]

i will say that the sw3 is alot better than the frist one but in my eyes tubbers is the only way to go

[666]

SW2 beat 2 tubers at the nationals in the top 5.

tubbers

[Natedog]

Originally Posted by rogman

i will say that the sw3 is alot better than the frist one but in my eyes tubbers is the only way to go

Not really a fan of tube chassis...they don't look like a truck, Jeep, etc...much easier to crawl well when there is no body weight up higher. There are only a very few tubers that I really like the look of...so I prefer a chassis that is covered by a body...same goes for 1:1.

Besides if they are both built correctly, it's like comparing apples and oranges...two entirely different beasts...

[BENDER]

Originally Posted by rogman

done write tubers can blow the sw3 away but is my thoughts so next time i will kept to myself

How many SW3's have you seen in person?

I'm sure you and your Nylint are tough to beat.

[Rc EnthuSiasTs]

Originally Posted by BENDER

How many SW3's have you seen in person?

I'm sure you and your Nylint are tough to beat.

The nylint and sw3's are very similar:-P

[TURTLE]

Originally Posted by rogman

done write tubers can blow the sw3 away but is my thoughts so next time i will kept to myself

i think you need to come out to colorado and figure out whats it all about. if you can beat one person runnin a 3 then you can talk. right now i think your clueless.

[Wrecker]

Originally Posted by rogman

done write tubers can blow the sw3 away but is my thoughts so next time i will kept to myself

Dude, you really have no idea what you're talking about. I don't see how you can possibly say that a tuber blows the sw3 away when Benders sw2 (not even an sw3) beat all of the tubers at nationals. Proving you're talking out of your azz.

Originally Posted by rogman

i will say that the sw3 is alot better than the frist one but in my eyes tubbers is the only way to go

This statement is what you should have started out with the first time. You don't have to like the sw3 at all, and that's cool. Everyone has there own opinions and tastes, that's why there's so many different designs of chassis and tubers out there and that's awesome. I'll agree tubers can perform very well, gimbals tubers are especially awesome from what I've seen and I would love to own one. In fact I'm going to be building a 2.2 tuber for fun after I finish my scaler. I think it's great that you only like tubers, but don't dergade other peoples hard work and trash talk stuff that you have absolutly no idea about.

[Rc EnthuSiasTs]

x2