:lmao:

Thanks and im ready to go again also!!!! My battery went dead and i wasnt done yet lol:evil: But Mini Moab to me is the best place to go scalin"thumbsup"

Thanks man im really diggin the body. I just have to figure out the interior now "thumbsup"

We all met up last weekend for a scale gtg. Usually i take alot of pics while im cruising around but i cant seem to put down my remote and grab the camera like i use too. This rig is just so much fun to drive.:twisted:

But here is a couple i managed to snap "thumbsup"

http://i289.photobucket.com/albums/l...3/rch317-1.jpg

http://i289.photobucket.com/albums/l...3/rch323-1.jpg

http://i289.photobucket.com/albums/l...3/rch325-1.jpg

http://i289.photobucket.com/albums/l...3/rch324-1.jpg

http://i289.photobucket.com/albums/l...3/rch327-1.jpg

http://i289.photobucket.com/albums/l...3/rch328-1.jpg

http://i289.photobucket.com/albums/l...0H3/rch359.jpg

http://i289.photobucket.com/albums/l...0H3/rch360.jpg

http://i289.photobucket.com/albums/l...3/rch311-1.jpg

http://i289.photobucket.com/albums/l...3/rch310-1.jpg

And here is some video from the dash cam in the Radio Rockin Wraith

http://www.youtube.com/watch?v=yGZ4v...ature=youtu.be

My fault, he's waiting for some spare parts. :oops:

Sorry for the lack of updates. There really isnt any as of now. I managed to get some of the interior in. Its going to be hard to try and get the seats mounted up. I may have to chop them really small and make a panal to mount them too. Well this is the way it sits now.
http://i289.photobucket.com/albums/l...3/DSCF2157.jpg
http://i289.photobucket.com/albums/l...3/DSCF2163.jpg

I went to a comp the other weekend and i didnt make it 5 yards as soon as i got there and i took a little roll and i broke the axle shaft coming out of the portal. Thanks to Dean i have some sitting here but i have to get the time to install them. I have some other goodies coiming so once they get here ill try and put up some updates. I have started on my 1/1 dream truck i have been wanting to build it for 7yrs now. And me and my girlfriend are about to have our first little one here in a couple of weeks so i wont have that much time for the hummer with my little girl and my 1/1 truck.

4dr nissan pathfinder
http://i289.photobucket.com/albums/l...rhardbody9.jpg

Single cab nissan hardbody cab
http://i289.photobucket.com/albums/l...hardbody18.jpg
http://i289.photobucket.com/albums/l...hardbody17.jpg

Cut it in half
http://i289.photobucket.com/albums/l...hardbody10.jpg

Single cab now up on the frame table with the front half of the pathy waiting to be trimmed up to fit.
http://i289.photobucket.com/albums/l...hardbody13.jpg

And one day look like this but with alot of my own twist"thumbsup"
http://i289.photobucket.com/albums/l...icious0167.jpg

Thanks again Dean for shipping the parts out!!!!!! "thumbsup"

Congrats on the upcoming birth of your little girl! 8)

Hope to get out on the trail with you again soon. "thumbsup"

Thanks Brian we are SUPER excited and cant wait to meet her!!!! Yeah you need to get out here and do some crawling with us. There is more and more scalers popping up:twisted:

Yeah I just need to finish one first. :lmao:

Re: Power To The Portal (Makeover)
 

not sure how I missed this, but I dig it "thumbsup"

Re: Power To The Portal (Makeover)
 

nice nissan. are you IN?

Re: Power To The Portal (Makeover)
 

Thanks you Sir!!! "thumbsup"



Yeah I'm IN? "thumbsup" all I drive is Nissans. But I haven't made a build thread for it yet over there.

Re: Power To The Portal (Makeover)
 

that is one awesome rig!!!


keith

Re: Power To The Portal (Makeover)
 

Thanks Keith.



The hummer is tore down right now I managed to get more lift out of the front end. Why I don't really know. Lol but I bought some gpm arms for it and the uppers suck. They fell apart on me twice so out they went. Besides the stock ones have way more travel. I found a way to get even more travel out of the front end but while its apart I'm going to put a new tub on her and do a full tear down and clean and paint the susp so it all matchs then throw some new paint on the body.

Updates coming "thumbsup"

Re: Power To The Portal (Makeover)
 

Can't wait to see it! The increase in lift might reduce the max steering angle and probably wear the CV's faster. I left it alone for reliability good luck with it though. "thumbsup"

BTW, I might build another one soon. :ror:

Re: Power To The Portal (Makeover)
 

Dibs! :mrgreen:

Re: Power To The Portal (Makeover)
 

Yeah I didn't think about the cv's lol and so far what I did I had to shim the steering and blend alittle more on the skid plate. I plan on making a whole new metal lower skid and lower ARM mounts when we slow down at work. And Hell yeah on building another one. I doubt ill go back to a solid axle rig I love these cc-01 to damn much.

Damn it!!!! You beat me too it. :mrgreen:

Re: Power To The Portal (Makeover)
 

Sold the hummer body and im gathering parts "thumbsup"

http://i289.photobucket.com/albums/l...3/IMAG0098.jpg

http://i289.photobucket.com/albums/l...3/IMAG0099.jpg