RCCrawler Forums

hotwheels000 · 06-01-2016, 08:33 PM

I lied !

Cant wait to try them on one of my comp scalers

Quote:

Originally Posted by new2rocks

Looks great. But 4.5 lbs? Did you fill that thing with helium, lol?

THEPITBULL · 06-02-2016, 06:23 AM

Quote:

Originally Posted by hotwheels000

LOL, I was distracted. Started a summary, had to leave for a bit and lost the blurb...

I am not a wordy fellow when it comes to writing.... so,

I will leave it at this and let the pics and punctuation do the talking.

Looks- YES!!!!!!!!!!!!!
Size- YES !!!!!!!!!!!!!!!
Compound- YES !!!!!!!!!!!!
TRACTION- YES ,YES, YES !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

imthatguy · 06-07-2016, 02:47 AM

Did a test at Smiggin's Folly, courtesy of Pardonmyn00b.

Tires hook up surprsingly well for how narrow and shallow treaded they are in the dry. I'd like to see more stuff in the wet and slippery before I make a final judgement. I spoke with Desmond a lot this past weekend, and of course I was doing something else while he was testing them in the mud, so I didn't get a firsthand account of their performance in said terrain. Too busy being an imthatguy I guess...

One thing Pit Bull definitely nailed was the foams. Probably the first stock foam I've used that doesn't immediately fold the tire over! Plenty firm with just the right amount of give. Plush. On a heavier truck, which the Gwagen is, they were excellent!

My only gripe is the height to width ratio. It may have been properly scaled down from it's full-size counterpart, but there's something a bit too narrow about it for me. On a truck with a normal amount of steering and a subtle lift, it'd be a lot better looking than it is on the Gwagen. My thanks to Pit Bull for sending me a set to give the once-over!

Tom the Kraut · 06-07-2016, 05:26 PM

G'day,
... as many people here like a challenge more than just rolling over every obstacle, how about a version for 1.55" wheels with a OD somewhere between 3.7" and the current 4.05"?

However, the 4.05" OD of the coming 1.9" version (ordered already and waiting impatiently!) would be good and fitting for a 1.55" wheel as well and would not interfere with our local Trophy regulations....

fr8cture · 06-07-2016, 06:13 PM

Yeah wish they were 1.55 as well.

Sent from my VS986 using Tapatalk

rc2000 · 06-15-2016, 09:14 AM

When do these hit the shelves?

madtinner · 06-15-2016, 06:53 PM

Pre ordered mine from rpp. They say end of June.

lockeduprc team driver

Haziza · 06-18-2016, 02:49 AM

Sick looking scale tire!

THEPITBULL · 07-10-2016, 04:54 PM

PB9010NK - PBX A/T HARDCORE 1.9 Scale W/Foam / Alien Kompound - MSRP $34.99 / MAP - $29.99

4.05 x 1.25-1.9

UPC#091037434845

new2rocks · 07-10-2016, 07:16 PM

These look fantastic on a D90:
Name: DSC00813.jpg
Views: 791
Size: 172.6 KB

Name: DSC00808.jpg
Views: 795
Size: 165.7 KB

The stock foams are having no problem supporting a 10+ pound truck.

Szczerba · 07-10-2016, 07:30 PM

Quote:

Originally Posted by THEPITBULL

PB9010NK - PBX A/T HARDCORE 1.9 Scale W/Foam / Alien Kompound - MSRP $34.99 / MAP - $29.99

4.05 x 1.25-1.9

UPC#091037434845

I may have missed it but when and where will these be available first? I know RPP is doing a pre-order.

madtinner · 07-10-2016, 07:35 PM

Quote:

Originally Posted by Szczerba

I may have missed it but when and where will these be available first? I know RPP is doing a pre-order.

Rpp says early July. Mine have been pre ordered since the middle of june.

lockeduprc team driver

THEPITBULL · 07-11-2016, 09:44 AM

Shipping from factory at end of July...usually 14 days until reaches our door.

mta · 07-23-2016, 01:14 PM

Quote:

Originally Posted by fr8cture

Yeah wish they were 1.55 as well.

Sent from my VS986 using Tapatalk

PIT BULL GROWLER AT/Extra 1.55 R/C Scale Tires 2 Stage Foam 2pcs

these what ya need? Just curious about them to saw em an wonder if i want to build another truck

fr8cture · 07-23-2016, 01:20 PM

Quote:

Originally Posted by mta

PIT BULL GROWLER AT/Extra 1.55 R/C Scale Tires 2 Stage Foam 2pcs

these what ya need? Just curious about them to saw em an wonder if i want to build another truck

Already had those.

Szczerba · 08-02-2016, 08:07 AM

And then?

madtinner · 08-05-2016, 06:04 PM

I'll be happy if I get them I time for ecsc.

lockeduprc team driver

dezmoon · 08-12-2016, 10:41 PM

https://youtu.be/3q1ShEw_1hk

https://youtu.be/7b9DyejTgqU

Some Footage!!!!!
https://youtu.be/LWgl3rwUUGo

https://youtu.be/wxEVM64gMhk

jreckner · 08-15-2016, 02:16 PM

Just wish they didn't have to put their logo so darn big on them.

Natedog · 08-15-2016, 02:20 PM

Quote:

Originally Posted by jreckner

Just wish they didn't have to put their logo so darn big on them.

X2, good looking and nice scale size otherwise, but all the logos etc on the sidewalls would look better if they were much smaller.

06-07-2016, 02:47 AM	#163
imthatguy I wanna be Dave Join Date: Jul 2010 Location: Toronto Posts: 2,389	Re: Pit Bull 1.9 PBX A/T Hardcore Did a test at Smiggin's Folly, courtesy of Pardonmyn00b. Tires hook up surprsingly well for how narrow and shallow treaded they are in the dry. I'd like to see more stuff in the wet and slippery before I make a final judgement. I spoke with Desmond a lot this past weekend, and of course I was doing something else while he was testing them in the mud, so I didn't get a firsthand account of their performance in said terrain. Too busy being an imthatguy I guess... One thing Pit Bull definitely nailed was the foams. Probably the first stock foam I've used that doesn't immediately fold the tire over! Plenty firm with just the right amount of give. Plush. On a heavier truck, which the Gwagen is, they were excellent! My only gripe is the height to width ratio. It may have been properly scaled down from it's full-size counterpart, but there's something a bit too narrow about it for me. On a truck with a normal amount of steering and a subtle lift, it'd be a lot better looking than it is on the Gwagen. My thanks to Pit Bull for sending me a set to give the once-over! Last edited by imthatguy; 06-07-2016 at 03:05 AM.

06-07-2016, 05:26 PM	#164
Tom the Kraut Newbie Join Date: Sep 2013 Location: Germany Posts: 14	Re: Pit Bull 1.9 PBX A/T Hardcore G'day, ... as many people here like a challenge more than just rolling over every obstacle, how about a version for 1.55" wheels with a OD somewhere between 3.7" and the current 4.05"? However, the 4.05" OD of the coming 1.9" version (ordered already and waiting impatiently!) would be good and fitting for a 1.55" wheel as well and would not interfere with our local Trophy regulations....

06-07-2016, 06:13 PM	#165
fr8cture I wanna be Dave Join Date: Jul 2013 Location: Minneapolis Posts: 5,202	Re: Pit Bull 1.9 PBX A/T Hardcore Yeah wish they were 1.55 as well. Sent from my VS986 using Tapatalk

06-15-2016, 09:14 AM	#166
rc2000 Rock Crawler Join Date: Aug 2009 Location: San Antonio Posts: 555	Re: Pit Bull 1.9 PBX A/T Hardcore When do these hit the shelves?

06-15-2016, 06:53 PM	#167
madtinner Rock Crawler Join Date: Jan 2010 Location: rockford Posts: 878	Re: Pit Bull 1.9 PBX A/T Hardcore Pre ordered mine from rpp. They say end of June. lockeduprc team driver

06-18-2016, 02:49 AM	#168
Haziza Quarry Creeper Join Date: Aug 2008 Location: Sweden Posts: 214	Pit Bull 1.9 PBX A/T Hardcore Sick looking scale tire! Last edited by Haziza; 11-05-2016 at 11:00 PM.

07-10-2016, 04:54 PM	#169
THEPITBULL Quarry Creeper Join Date: Aug 2008 Location: St. Louis Posts: 357	Re: Pit Bull 1.9 PBX A/T Hardcore PB9010NK - PBX A/T HARDCORE 1.9 Scale W/Foam / Alien Kompound - MSRP $34.99 / MAP - $29.99 4.05 x 1.25-1.9 UPC#091037434845

07-10-2016, 07:16 PM	#170
new2rocks I wanna be Dave Join Date: Apr 2014 Location: North Carolina Posts: 2,254	Re: Pit Bull 1.9 PBX A/T Hardcore These look fantastic on a D90: The stock foams are having no problem supporting a 10+ pound truck.

07-11-2016, 09:44 AM	#173
THEPITBULL Quarry Creeper Join Date: Aug 2008 Location: St. Louis Posts: 357	Re: Pit Bull 1.9 PBX A/T Hardcore Shipping from factory at end of July...usually 14 days until reaches our door.

08-02-2016, 08:07 AM	#176
Szczerba I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA Posts: 8,785	Re: Pit Bull 1.9 PBX A/T Hardcore And then?

08-05-2016, 06:04 PM	#177
madtinner Rock Crawler Join Date: Jan 2010 Location: rockford Posts: 878	Re: Pit Bull 1.9 PBX A/T Hardcore I'll be happy if I get them I time for ecsc. lockeduprc team driver

08-12-2016, 10:41 PM	#178
dezmoon I wanna be Dave Join Date: Jul 2007 Location: Within The Machine,,, Posts: 2,031	Re: Pit Bull 1.9 PBX A/T Hardcore https://youtu.be/3q1ShEw_1hk https://youtu.be/7b9DyejTgqU Some Footage!!!!! https://youtu.be/LWgl3rwUUGo https://youtu.be/wxEVM64gMhk Last edited by dezmoon; 08-12-2016 at 10:44 PM.

08-15-2016, 02:16 PM	#179
jreckner Pebble Pounder Join Date: May 2008 Location: grand rapids Posts: 145	Re: Pit Bull 1.9 PBX A/T Hardcore Just wish they didn't have to put their logo so darn big on them.

Pit Bull 1.9 PBX A/T Hardcore - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who Wants a 1.55 Pit Bull???	dezmoon	Tires and Wheels	252	05-18-2014 03:52 PM
pit bull	zion23	Tires and Wheels	10	04-25-2013 05:25 PM

Sponsored Links

RCCrawler Forums

Thread: Pit Bull 1.9 PBX A/T Hardcore