New SSD Aluminum Servo Horn for TRX-4

[Topher Builds]

Originally Posted by celt

22mm c-to-c right?

That’s what I just measured the stock horn at right meow. Pulled it out yesterday so it was just laying around.

[JatoTheRipper]

Originally Posted by Pant Danza

...right meow.

No, you didn't!

[Topher Builds]

Originally Posted by JatoTheRipper

No, you didn't!

[RCTom]

Well, since you guys brought it up.

Super Troopers 2 in theatres on 4/20/2018.

Mother of God.

https://www.youtube.com/watch?v=fE97YHD1nNQ

https://www.youtube.com/watch?v=xbxd4GomQ9w

[33m]

I do not! recommend this horn for the Bronco. I had to grind it down so that at full compression there wasn't any interference with the stock link.

[Schs2013]

I have a SSD trx4 servo horn I saw a small difference in size but don't think it's that big of a deal? On stock servo right now.
Because from what I can tell looks like it maybe 1mm off from stock one eyeballing guess

Sent from my FRD-L14 using Tapatalk

[cmbscx10]

Originally Posted by RCTom

I see that SSD has not responded yet, but has anyone else confirmed or denied if these SSD arms are in fact shorter than the original Traxxas arms? Or if Traxxas has more than one length arm they use?

Originally Posted by JatoTheRipper

A couple of mm on a servo horn can be a big deal especially when you're dealing with a weak, stock servo.

I completely believe you designed it to the the same length as the stock servo you had in your possession.

I'm going to measure my Bronco horn tonight as long as I remember,

Hard to multi-quote without upsetting anyone. This is not pointing finger type response.

I have read that Traxxas also has different axle stubs from earlier to newer TRX4's. As JTR stated, SSD may have either the old or the new. So, i wouldn't go Sh*t talking SSD who make some incredibly accurate items. I feel SSD will resolve and respond as professionally as they always do.

[JatoTheRipper]

I forgot to measure the length of my servo horn.

Andy updates on this from SSD?

[Natedog]

This servo horn fits and clears everything on my TRX-4. It's offset the opposite direction from most horns and is long enough to easily get full steering in both directions even with the stock Traxxas radio.
https://www.amainhobbies.com/hudy-ma...293503/p165735

[Schs2013]

Originally Posted by Natedog

This servo horn fits and clears everything on my TRX-4. It's offset the opposite direction from most horns and is long enough to easily get full steering in both directions even with the stock Traxxas radio.
https://www.amainhobbies.com/hudy-ma...293503/p165735

I like that one no little clamping screws. Just bolts on. I'll give them a try as well.

Sent from my FRD-L14 using Tapatalk

[JatoTheRipper]

Originally Posted by Natedog

This servo horn fits and clears everything on my TRX-4. It's offset the opposite direction from most horns and is long enough to easily get full steering in both directions even with the stock Traxxas radio.
https://www.amainhobbies.com/hudy-ma...293503/p165735

Do you know the three length options on this horn?

[Schs2013]

Also released today. A metal traxxas trx4 servo horn https://m.traxxas.com/products/parts/8247X

Sent from my FRD-L14 using Tapatalk