RCCrawler Forums

hotwheels000 · 06-30-2009, 01:53 PM

x2, that dig is awsome

Quote:

Originally Posted by SMR4RUNNER

Dustin gave us a demo on Sunday. He held down his tires and applied torque till the front of his rig lifted of the ground about 45 degrees then engaged dig. No problem!!!! Great job guys.

MDcrawler72 · 06-30-2009, 01:55 PM

Will this dig work with the DNA 2.2 SSS chassis?

Thanks

Vp Monkey · 06-30-2009, 02:14 PM

Quote:

Originally Posted by MDcrawler72

Will this dig work with the DNA 2.2 SSS chassis?

Thanks

We do not have a dna 2.2 sss chassis here.

But if a dna dig fits, I am positive our dig fits. We follow the ax-10 transmission case and the housing unit is 1.08" tall. the dna housing minus bushing sticking out measures 1.132" ? Plus the output to the drive shaft is stationary and does not move in and out of the housing.

MDcrawler72 · 06-30-2009, 02:21 PM

Quote:

Originally Posted by Vp Monkey

We do not have a dna 2.2 sss chassis here.

But if a dna dig fits, I am positive our dig fits. We follow the ax-10 transmission case and the housing unit is 1.08" tall. the dna housing minus bushing sticking out measures 1.132" ? Plus the output to the drive shaft is stationary and does not move in and out of the housing.

Thanks for the fast reply!

EeePee · 06-30-2009, 02:22 PM

That looks great!

Do you have an exploded view?

Quote:

Originally Posted by Vp Monkey

We are ordering some maxx shafts, to check into accomadating these also, or maybe as a option, since this package is already created.

Excellent! A 6 mm output with a hole would be so perfect...

... for me anyways. I'm using Maxx shafts and 6 mm outputs in the trans and 6 mm inputs at the axles.

Get that done, and I'm buying one of these.

Thank you!

Vp Monkey · 06-30-2009, 02:25 PM

Quote:

Originally Posted by EeePee

That looks great!

Do you have an exploded view?

http://www.vanquishproducts.com/vp-d...xial-ax10.html

Atm we have some pictures of all the parts.

EeePee · 06-30-2009, 02:27 PM

Thank you!

I asked because I'm curious if my CDW 6 mm output will bolt to your rear half. That way if you guys do the 6 mm output I can have a 6 mm output in front also.

Robbob · 06-30-2009, 02:57 PM

This thing is sick.

Any chance of offering a hole in the outdrive as an opition or would a normal drill bit and press go through this?

Cruzin Illusion · 06-30-2009, 03:01 PM

I have got to see the dig first hand this weekend at the Vanquish Products shop and at the WCC. All's I can say is that you will not be disapointed. The dig can literally fit inside the DNA dig and your driveshaft does not move when the dig is engaged or disengaged. Do to the geometry you will not have to have a servo that puts out tons of force. Plus with the design the dig engages faster than any other dig I have seen. Again another amazing product from Vanquish.

Tanis · 06-30-2009, 03:37 PM

Quote:

Originally Posted by Vp Monkey

Were you with scuzzy on saturday night?

I guess they tried to break the dig as best they could

No, I wasn't there, but got the full story from Dustin

I really enjoyed spending some time hanging out and chatting with ya Jim

Quote:

Originally Posted by SMR4RUNNER

Dustin gave us a demo on Sunday. He held down his tires and applied torque till the front of his rig lifted of the ground about 45 degrees then engaged dig. No problem!!!! Great job guys.

That was a great little test to watch

Quote:

Originally Posted by BENDER

I got my hands on one of these units during the Axial West Coast Championships this weekend. I can't wait to get it installed. Tons of awesome features in a super compact dig unit.

Quote:

Originally Posted by MDcrawler72

Will this dig work with the DNA 2.2 SSS chassis?

Thanks

Yes

Quote:

Originally Posted by EeePee

I asked because I'm curious if my CDW 6 mm output will bolt to your rear half. That way if you guys do the 6 mm output I can have a 6 mm output in front also.

You can bolt the front CDW output the the VP rear output Eeep

I'll be installing my unit when I get a chance this week

EeePee · 06-30-2009, 04:01 PM

Quote:

Originally Posted by Tanis

You can bolt the front CDW output the the VP rear output Eeep

Thanks T.

P1choco · 06-30-2009, 06:23 PM

Quote:

Originally Posted by Robbob

This thing is sick.

Any chance of offering a hole in the outdrive as an opition or would a normal drill bit and press go through this?

440C is some pretty tuff stuff. I have arrow heads made from this metal and they are a biatch to sharpen and take a beating like no other arrowhead I've ever used.

Raped_Ape · 07-01-2009, 12:37 AM

After seeing Jims rig run around down at Vanquish, I am sold. Hard to beat those SIX points of contact. Butter smooth!

cfox109 · 07-02-2009, 05:37 PM

Nice! Finaly a dig that wasnt a copy cat. Ill have to get one of these

barbaricboye · 07-02-2009, 08:25 PM

just ordered one, Steve.

thanks for answering my questions over the phone... your confidence in this dig really swayed me to BUY NOW instead of waiting for reviews.(go ahead and wait for the reviews, according to Steve-they got like 2k units in stock).

looks like im sticking to a shafty.

FYI- this is a 3 position dig. I guess no one has asked yet.

XSRCdesign · 07-02-2009, 10:06 PM

I'm glad I waited...

this looks NICE

SDheavymetal · 07-02-2009, 11:15 PM

How many OZ servo do you recommend? Is the mount for for a normal or micro?

tom@vp · 07-02-2009, 11:39 PM

we have not figured out how low is safe yet, jim is running a 43 oz/in @ 4.8V, 49 oz/in @ 6V and its flawless. the mount is currently for a standard servo. we will get a flood of information in the comming days. there has been quite a few orders shipped out today.

jeeper_05 · 07-02-2009, 11:47 PM

Quote:

Originally Posted by tom@vp

we have not figured out how low is safe yet, jim is running a 43 oz/in @ 4.8V, 49 oz/in @ 6V and its flawless. the mount is currently for a standard servo. we will get a flood of information in the comming days. there has been quite a few orders shipped out today.

Will there be a mini servo mount in the future?

Vp Monkey · 07-03-2009, 12:25 AM

Quote:

Originally Posted by jeeper_05

Will there be a mini servo mount in the future?

Yes sir, soon as we catch up on regular mounts. lower cog !

06-30-2009, 01:55 PM	#22
MDcrawler72 Rock Crawler Join Date: Nov 2008 Location: SoCal Posts: 861	Will this dig work with the DNA 2.2 SSS chassis? Thanks

06-30-2009, 02:27 PM	#27
EeePee MODERATOR™ Join Date: Jul 2004 Location: Ohio Posts: 18,928	Thank you! I asked because I'm curious if my CDW 6 mm output will bolt to your rear half. That way if you guys do the 6 mm output I can have a 6 mm output in front also.

06-30-2009, 02:57 PM	#28
Robbob Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :( Posts: 4,501	This thing is sick. Any chance of offering a hole in the outdrive as an opition or would a normal drill bit and press go through this?

06-30-2009, 03:01 PM	#29
Cruzin Illusion Keep Crawling in Crawling Join Date: Jan 2009 Location: Commerce City Posts: 797	I have got to see the dig first hand this weekend at the Vanquish Products shop and at the WCC. All's I can say is that you will not be disapointed. The dig can literally fit inside the DNA dig and your driveshaft does not move when the dig is engaged or disengaged. Do to the geometry you will not have to have a servo that puts out tons of force. Plus with the design the dig engages faster than any other dig I have seen. Again another amazing product from Vanquish.

07-01-2009, 12:37 AM	#33
Raped_Ape Newbie Join Date: Jun 2007 Location: Puyallup Posts: 33	After seeing Jims rig run around down at Vanquish, I am sold. Hard to beat those SIX points of contact. Butter smooth!

07-02-2009, 05:37 PM	#34
cfox109 Quarry Creeper Join Date: Jul 2008 Location: Foothill Ranch Posts: 252	Nice! Finaly a dig that wasnt a copy cat. Ill have to get one of these

07-02-2009, 08:25 PM	#35
barbaricboye Quarry Creeper Join Date: Jul 2008 Location: Back in Sunny SoCal Posts: 210	just ordered one, Steve. thanks for answering my questions over the phone... your confidence in this dig really swayed me to BUY NOW instead of waiting for reviews.(go ahead and wait for the reviews, according to Steve-they got like 2k units in stock). looks like im sticking to a shafty. FYI- this is a 3 position dig. I guess no one has asked yet.

07-02-2009, 10:06 PM	#36
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	I'm glad I waited... this looks NICE

07-02-2009, 11:15 PM	#37
SDheavymetal RCC Addict Join Date: Jul 2008 Location: San Diego Posts: 1,144	How many OZ servo do you recommend? Is the mount for for a normal or micro?

07-02-2009, 11:39 PM	#38
tom@vp I joined the Band! Join Date: Jun 2008 Location: Sacramento Posts: 1,303	we have not figured out how low is safe yet, jim is running a 43 oz/in @ 4.8V, 49 oz/in @ 6V and its flawless. the mount is currently for a standard servo. we will get a flood of information in the comming days. there has been quite a few orders shipped out today.

Sponsored Links

RCCrawler Forums

Thread: Vanquish Products Hurtz Shifter Dig