Bumping with more wheel ideas... 2.2 scale. :mrgreen:

With scale 2.2's becoming more popular and the tires getting bigger, we need wheels with less backspacing. And a scale 1" wide SLW with a dish that can use a .350 hub and have zero backspacing would be ideal IMO.

This...
http://host.eznettools.net/~X354567/...atte-black.jpg

With a beadlock...
http://www.omfperformance.com/locals...arz_web_lg.jpg



Or any other OMF beadlock on this page...
http://www.omfperformance.com/beadlocked_wheels.php

What about some different beadlock ring designs?

I wanna support this idea!"thumbsup"

And how about a dig unit for the Traxxas Summit tranny for the scaler crowd?

I want some 17" SLW's for my FJ "thumbsup"

I like your reversed thinking!:lmao:
I take a set of 17" Respun V6 for my nissan!"thumbsup"



















P.S. Let me now if you wish me to erase this post VP Monkey!;-)

i wish i had a lathe big enough ! :lmao:

1.9 wheels with more positive offset for scalers. Not much out there to keep the track width narrow. Similar offset to HPI's 0 offset stock car wheels. Have replacable hubs like your 2.2's to make it adjustable if you want a wider option.

Scaler transmission!!!

Ideas:
Re-design the AX10 tranny using the same gears, maybe laying it down some and allow for the use of 50-60t spurs.

Or just build a low profile tranny as we don't have to many option for GRUs either.

2-Speed would be sweet, Axial transmission style lol.

There is already a 2 speed R2 kinda for scalers, but is a bit too slow for my taste.

So yeah scaler tranny and a really strong winch too, like the one MSD makes(powerwise).

I'm easy..... I like too see Vanquish offer their hubs in different colors...
I'd like some red anodized hubs for my new SLW V5 Re-spuns. (black wheel, red rings and red hubs).
That would look really badass8)


.

the R2 2-Speed is a joke, and won't handle outrunner power

a bta steering set up to be used with shock razors

Knuckle weights that resemble disk rotors and calipers for scalers. Add low slung weight and style, 2 fer 1

Come on mrc gears lol..

That machined like a brake rotor thing for the knuckle weights is a good one tho.

I had a good idea last night, it would be easy and quick to produce as well.

I know you said that you are working on a faux disc brake hex adapter, but how about a simple brake rotor that would sandwich between the 2 halves of the RC4WD 1.9 and 2.2 steel wheels? It would just basically have enough of a diameter to be seen from the front section of the wheel. It could be .030-.040 thickness and it would just need the holes for the wheel hardware to pass through it.

I get the first set if you build these!

looking for a challenge?

http://image.fourwheeler.com/f/11295..._m4_wheels.jpg

Sure, where is the challenge? :D

I see a copy of my post and alot of (cheap) talk.
finished product pic isnt loading....

:D

Are you guys still going to produce the cromo gears and universals & axles for the xr10?

the machining it self isn't the challenge, its the cost..