The maxbonv KoH Twin Hammers

[maxbonv]

This is my project Twin Hammers, first arrived in Italy,
I will write not so many words, I'm sorry for my incorrect English.
A detailed description of the project, if anyone is interested in seeing,
it is in Italian Scalers and Crawlers Forum.

These are pictures of the current state, the body is unfinished.























it can be observed that the original position of the battery is now occupied
by the spare wheel, a provision which in my opinion is more realistic.
In the coming days add photos to the electronic (brushless motor)
and new support for 3s lipo.

[shwng1973]

That change looks so real. Like how you detailed the interior.

[Vertec]

Looks Good
When i was looking at going this route i noticed that you can put a 2s between the driver and the shock tower long ways but a 3s is tight and would have to set higher. A 3s will fit under the driver where the esc is and the esc can be moved back between the shock towers but you will have to remove the 6 screws to lift the cage to change out packs.

[maxbonv]

Originally Posted by shwng1973

That change looks so real. Like how you detailed the interior.

thanks for your appreciation, I add a photo of the interior

[Big Mike]

Originally Posted by shwng1973

Like how you detailed the interior.

X2 ^ nice driver! The "Sparco seat" is a simple yet cool touch.

Dude, your English is better than a lot of these kids over here in the States!! You use punctuation and the shift key, and you didn't misspell a single word...

[maxbonv]

Originally Posted by Vertec

Looks Good
When i was looking at going this route i noticed that you can put a 2s between the driver and the shock tower long ways but a 3s is tight and would have to set higher. A 3s will fit under the driver where the esc is and the esc can be moved back between the shock towers but you will have to remove the 6 screws to lift the cage to change out packs.

Even my friends in the forum Italian waiting to see how I built support for rapid extraction of lipo battery, I assure you that is functional, and you can change the battery without removing any screws

[maxbonv]

Originally Posted by Big Mike

X2 ^ nice driver! The "Sparco seat" is a simple yet cool touch.

Dude, your English is better than a lot of these kids over here in the States!! You use punctuation and the shift key, and you didn't misspell a single word...

Thank you for your advice , you are very kind, now I'd like to read and write again,
but in Italy at the moment are the 2:41 AM, it is best that I go to sleep ...

[northkona]

That looks really good but the quick battery access has me stumped, you gotta show us how.

[Vertec]

Originally Posted by maxbonv

Even my friends in the forum Italian waiting to see how I built support for rapid extraction of lipo battery, I assure you that is functional, and you can change the battery without removing any screws

Looking forward to it

[shwng1973]

Would like to see the battery mod when you get the chance.
Have a New head I'm painting tonight to go in too.

[heinie_21]

Hood looks so so so much better

Sent from my SCH-I535 using Tapatalk 2

[wrightcs77]

That looks great. I look forward to seeing more of it.

Your English is fine, much better than many on here and much better than my Italian........lol.

[motomoto]

Your hood looks fantastic. Nice work!

[Norcal_GIT_r]

Very nice..Love the interior..Great job!

[maxbonv]

I show you my choice for electronics, motor and battery,

Lipotech XR10 Vario

Lipotech LTV30 1800mA 3s

Esc Castle Creation Mamba Max Pro

[maxbonv]

It's time to show the location and the quick-change system battery, here:


Support for Lipo with protective film:




Free from the protective film:







Here is the sequence of installing the battery, the left side panel
opens a compass to facilitate the view and insert operations, so.

Pannello ad apertura rapida TH - YouTube

This is the view of the entry window, I cut the diagonal crossbar that was originally
it bothered and reduced the input area, more than anything else with a 2250 to 65/130C.



Phase 1 lipo battery insertion:





Just check the battery connector to help him out:



Push to end the lipo battery in its slot:







Sorry for the low quality photos, I had little time today and I did everything with an iPad.

[northkona]

Bravo ! that is very cool.
I just checked my 2200 3S batteries and I reckon they will fit too.
I can see a lot of these mods are going to show up now.

[maxbonv]

Originally Posted by northkona

Bravo ! that is very cool.
I just checked my 2200 3S batteries and I reckon they will fit too.
I can see a lot of these mods are going to show up now.

I have built in support to use in addition to the lipo battery 1800mAH these:

[IMG][/IMG]

[northkona]

Good to know, I am using a 17.5T as well and on 3S its all you need with this rig, its very light and performs well.

[Big Mike]

That's pretty creative thinking there. Excellent...