| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
09-02-2017, 07:26 AM
| #21 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
|  Re: Nedmo's Twin Hammers Brocky build
Let there be light!!! Been speaking to Al from HeyOk and ended up getting a lighting controller from him. Pretty sweet bit of kit. Brake lights at nuetral, reverse and after 30 seconds of sitting, flashing hazards. Then with a switch on the TX, I have park lights (brake lights convert to dim on forward) forward lights, headlights direct from battery voltage and twin flashing KOH lights. Plus an always on output. Also installed a yeti sealed RX box between the rear shock towers.     Sent from my Pixel using Tapatalk |
|  |
| Sponsored Links | |
| | |
|
09-02-2017, 05:32 PM
| #22 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Day pics of the receiver box, front and rear lights.       Sent from my Pixel using Tapatalk |
|
| |
|
09-07-2017, 05:40 PM
| #23 |
| RCC Addict Join Date: Feb 2016 Location: Santa Maria, CA
Posts: 1,751
| Re: Vaugn Gitten Jnr "Brocky" build
I came across it in another thread and had to make sure you saw it: New Bright R/C Vaughn Gittin Jr |
|
| |
|
09-07-2017, 06:37 PM
| #24 | |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Vaugn Gitten Jnr "Brocky" build Quote:
Sent from my Pixel using Tapatalk | |
|
| |
|
09-07-2017, 06:42 PM
| #25 |
| RCC Addict Join Date: Feb 2016 Location: Santa Maria, CA
Posts: 1,751
| Re: Vaugn Gitten Jnr "Brocky" build
I figured you'd already seen them since NewBright is one of Brocky's primary sponsors. No doubt your's will be WAY ahead of the New Bright. Have you seen one in person though? I was just thinking the hardbody might be of use.
|
|
| |
|
09-07-2017, 08:45 PM
| #26 | |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Vaugn Gitten Jnr "Brocky" build Quote:
Mine is going to have a realistic steel cage and body panels mounted individually. Sent from my Pixel using Tapatalk | |
|
| |
|
09-07-2017, 08:53 PM
| #27 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Small update and images of the worlds most jam-packed twin hammers. The servo mount plate is so tight against my ESC i actually had to profile the plate and the servo upright. When i got this TH used, it only had one gear installed. So today I installed metal transmission gears, a full size servo, gearhead servo plate and customized a nitro style shift linkage. Tried the stock setup and it was horrendous shifting. Constantly jamming and very taxing on the servo. Also installed the HeyOK light controller number two, for the light bar and rock lights. Has 3 stages of dimming.       Sent from my Pixel using Tapatalk  |
|
| |
|
09-14-2017, 01:59 AM
| #28 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Decided the front of this shorty cage needed some cahe so I cut off the front of my spare full cage and then fabbed up an alloy hood.     Sent from my Pixel using Tapatalk |
|
| |
|
02-04-2018, 09:27 PM
| #29 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Finally starting on the cage!!! Need to upgrade from butane to a MAPP torch. Butane takes like 5 minutes per braze!  Sent from my Pixel using Tapatalk |
|
| |
|
02-06-2018, 03:50 PM
| #30 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Another couple of hours in. All the major bends are done, now just straight tube construction. Only had to redo the roof hoops twice to get it symmetrical haha.  Sent from my Pixel using Tapatalk |
|
| |
|
02-07-2018, 04:11 AM
| #31 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Vaugn Gitten Jnr "Brocky" build
also ordered my custom designed grill from Shapeways and also just drew this fuel cell reciever box up. http://autode.sk/2sdBnYd |
|
| |
|
02-09-2018, 04:46 AM
| #32 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
More work on the cage. Into the hardware of getting it mounted onto the chassis. I was hoping that I would be able to do just cage and leave shocks mounted to original.location, but not going to be possible. So going move my shocks onto the holes of vanquish arms and make custom upper mounts on the cage. Also going to attemp a hinged bonnet for battery access.    Sent from my Pixel using Tapatalk |
|
| |
|
02-20-2018, 04:15 AM
| #33 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Changed up the plan on how to mount to chassis.     Sent from my Pixel using Tapatalk |
|
| |
|
02-22-2018, 03:48 AM
| #34 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Vaugn Gitten Jnr "Brocky" build
Bought some supplies today to make some scale like tie rods and turnbuckles.  |
|
| |
|
02-24-2018, 04:43 PM
| #35 |
| I wanna be Dave Join Date: Aug 2016 Location: Orange County, CA
Posts: 3,643
| Re: Vaugn Gitten Jnr "Brocky" build
Progress is looking great!
|
|
| |
|
03-12-2018, 07:25 PM
| #36 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Some updates! New parts day!!! Wheel setup done! eBay 5 spoke wheels. Extremely good quality! Comes wirh SLW style hubs. Ottsix KLR a/t CI lil nova 4.5" foams soft/med (she's gonna be a fatty!) Custom painted beadlock lockeduprc m2x5mm scale hardware is incoming. Light bar done RPM light buckets 3d printed mount bracket Tube work 3d printed rear cab panel with integrated light bar and axial radiator mount. Really happy with this. The print texture looks like some kind of fibre panel and a simple solution to mounting these two parts. Light is a Maddog RC KOH light bar.          Sent from my Pixel using Tapatalk |
|
| |
|
03-24-2018, 09:38 PM
| #37 |
| Rock Stacker Join Date: Aug 2005 Location: olyWA
Posts: 64
| Re: Vaugn Gitten Jnr "Brocky" build
Looking good. That Bronco is very impressive in person, I’ve seen it a few times now. Can you share a link to those eBay wheels? |
|
| |
|
03-25-2018, 04:17 AM
| #38 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Yeah I would love to see it in action. Maybe he will bring it to Australia haha. Wheels here https://rover.ebay.com/rover/0/0/0?m...2F152750854341 Sent from my Pixel using Tapatalk |
|
| |
|
03-25-2018, 02:48 PM
| #39 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Been designing up a storm for 3d printed parts. Here is the scale V8 engine with combined firewall and operating forward tiling hood hinges. Battery will be in a compartment behind here. There is room for a radiator too.   Sent from my Pixel using Tapatalk |
|
| |
|
04-07-2018, 03:03 PM
| #40 |
| Quarry Creeper Join Date: Apr 2017 Location: Melbourne Australia
Posts: 404
| Re: Nedmo's Twin Hammers Brocky build
Dash painted and detailed Scale radiator for the engine bay Got the front bumper, skid plate and the winch mount all done.        Sent from my Pixel using Tapatalk |
|
| |
|
Vaugn Gitten Jnr "Brocky" build - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| "Legacy" a "shannon campbell inspired" TH build | Rodamis | Vaterra Twin Hammers | 25 | 09-15-2016 09:44 AM |
| <iframe width="420" height="315" src="//www.youtube.com/embed/gYr-dbPEOnE" frameborde | boolean21 | Scale Videos! | 0 | 10-01-2013 09:39 AM |
| Jkabee's "total noob" TJ build "this should be fun!" | jkabee | Axial SCX-10 | 128 | 03-24-2013 12:10 PM |
| Chaotic Crawlers "DEMON" build! aka "Kreacher" | Mac10 | EnRoute Berg | 96 | 09-26-2010 01:49 PM |
| |
Linear Mode
