02-13-2011, 09:42 PM | #201 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
no thats probably not a good thing venomcrawlerdud could possibly come apart on ya . well i finished putting the creeper back together got all the new bearings installed ( thanks avid ) got the new xvd's installed ( thanks rc4wd for making more of these ) also got the new chassis installed as seen in the above pics ( thanks dinky r/c for a quality product ) . i will get pics up soon of the new creeper . i need to get out and test it once the snow melts off and i can get to some rocks without sloshing through 6" of mud if it works the way it is i have massive ground clearance so we will see |
Sponsored Links | |
02-21-2011, 10:54 PM | #202 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
okay first test run is over ............... to tall .................. anybody got a set of 90mm shocks they want to get rid of ? |
02-21-2011, 10:57 PM | #203 |
Rock Crawler Join Date: May 2010 Location: Albuquerque
Posts: 821
|
i got stock dual-rate axial shocks from my honcho . . . . have no idea what size they are lol
|
02-21-2011, 11:07 PM | #204 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
| |
02-21-2011, 11:22 PM | #205 |
Rock Crawler Join Date: May 2010 Location: Albuquerque
Posts: 821
|
pm sent
|
02-21-2011, 11:22 PM | #206 | |
Rock Crawler Join Date: Feb 2010 Location: eugene
Posts: 549
| Quote:
http://prolineracing.com/performance...cks-90mm-95mm/ | |
02-21-2011, 11:59 PM | #207 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
well looks like i have the shocks i needed thanks guys
|
03-06-2011, 10:54 PM | #208 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
okay after doing some searching i found a set of traxxas shocks that are 90mm extended got them installed on looks much better now to test it
|
03-16-2011, 09:22 PM | #209 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
much better with the new shocks and the new chassis is working well , i went to one of our local comp spots and ran some of the lines that i had problems with or couldn't pull off at all and i pulled off almost all of them one is almost impossible to get because of an undercut that is almost exactly as tall as a rover tire . our first comp of the year is this saturday so now i just have to remember how to drive and i will post some pics of the new setup maybe tomorrow and pics of the comp on sat
|
03-21-2011, 01:50 AM | #210 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
alright creepers this year is starting off well , we ran our first comp sat and i finished 2nd in sportsman i am quite happy with the new changes to my creeper . now for some pics and if i can a link to one of our new guys videos of the comp and yes i did have my front driveshaft ome apart and here is the link to the video Last edited by viper6171; 03-21-2011 at 01:54 AM. |
03-21-2011, 10:15 AM | #211 |
Pebble Pounder Join Date: Sep 2010 Location: Lees Summit
Posts: 190
|
Nice Job Viper! How do you like the new venom skid? Could you tell any difference with it?
|
03-21-2011, 02:38 PM | #212 |
RCC Addict Join Date: Sep 2010 Location: Malta, NY
Posts: 1,340
|
looks sick
|
03-21-2011, 10:36 PM | #213 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
| |
03-21-2011, 11:06 PM | #214 |
Rock Crawler Join Date: May 2010 Location: Albuquerque
Posts: 821
|
i got a question for you viper, how is your steering setup? is it stock or have you done something to it?
|
03-21-2011, 11:42 PM | #215 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
| well it is basically like the stock setup i made a new connecting link because the venom rod ends were binding up bad ( ball didn't want to rotate ) so i made a new one had to trim the ends to allow full turning then i bent it in the center to clear the center of the axle case i reused one of the old upper links as a draglink and now my steering is nice and smooth |
03-22-2011, 08:21 AM | #216 |
Rock Crawler Join Date: May 2010 Location: Albuquerque
Posts: 821
|
would you mind posting a couple pics up of your setup?
|
03-22-2011, 09:23 PM | #217 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
| |
03-23-2011, 10:46 PM | #218 |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
|
okay chappy here are the pics ( sorry about the blurriness i need a better camera) |
03-24-2011, 08:08 AM | #219 |
Quarry Creeper Join Date: May 2009 Location: melbourne/palm bay
Posts: 203
|
is that chassis still available, is the creeper skid an option? i love the way it looks and how well the VW body fits it! ive have 1 of those bodies sitting here in the bag, but dont think it will suck down that low in the stock chassis....
|
03-24-2011, 10:26 PM | #220 | |
RCC Addict Join Date: Dec 2008 Location: pullin somebody else out of a mud hole
Posts: 1,759
| Quote:
hope this link works ***Dinky R/C "Sport" Series Comp Chassis*** Last edited by viper6171; 03-24-2011 at 10:35 PM. | |
| |