Crap, didn't see the 3PK part. Lemme see.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
4PK Setups, Tips, Tricks and Help
- Thread starter Harley
- Start date
Crap, didn't see the 3PK part. Lemme see.
Got it, here is the mix that will allow you to use 2 different buttons to control the 3rd channel.
PMIX1
mst:ch3
slv:ch3
ofst:+100
PMIX2
mst:ch3
slv:ch3
ofst:-100
Using the "offset" feature of the mix menu is the key here. It allows the 3rd channel to go full throw in one direction with the push and hold of a button. I assume the 3PK has 2 mixes, right?
Let me know if you need more detail, I can type it up tonight.
Yup 3PK has 2 mixes IIRC. That sounds like it should work.
jmontes_21
Quarry Creeper
Ok did what you said on the mix set up do i need to change any of the buttons for this to work
i set up SW2 and when i press it it will work but dosent go back to neutral it go to rear dig not working the way i wanted can you help
i set up SW2 and when i press it it will work but dosent go back to neutral it go to rear dig not working the way i wanted can you help
Change the buttons from "ALT" to "NOR". That changes the behavior of the button from a "push on, push off" to a momentary type where you have to hold the button to keep it on.
Szczerba
I wanna be Dave
Did the bbeaty workaround for the 4pks. Rear value is displayed on the right as well as the servo view on the left. Good to go.
jmontes_21
Quarry Creeper
Did that it will do what I want front dig rear lock but when i let go it will go to rear dig front lock can't figure it out its got to be in the mixing but how to fix it i don't
Sneed
Rock Crawler
Interested in the 3pks. Can it run C2 mode and use the new 614 Rx?
3pK is C1 mode only.
Yes.
jmontes_21
Quarry Creeper
Any idea what Im doing wrong or how to make this work
Post up exactly what you have for your mixes and button assignments.
"thumbsup" I'm guessing you haven't done exactly as whoodie posted before. Reread his posts and if you can't figure it out post your screens and we can probably fix it. Reread his instructions first though.
jmontes_21
Quarry Creeper
Ok i read it again can't get it to work here is the pics you asked for
http://i876.photobucket.com/albums/ab321/jmontes_21/2010-12-07195226.jpg
http://i876.photobucket.com/albums/ab321/jmontes_21/2010-12-07195226.jpg
Last edited by a moderator:
Maybe set the down value to 0. I would have to read through what Whoodie posted more as I haven't looked into this extensively yet.
dang i keep reading and switching stuff around both from jdawg53 and herley0706 posts and well............................................................................. my radio must be really messed up o well guess ill send it in and get the software update and see where it goes from there ..............................................
dang i keep reading and switching stuff around both from jdawg53 and herley0706 posts and well............................................................................. my radio must be really messed up o well guess ill send it in and get the software update and see where it goes from there ..............................................
What are you try to accomplish? If you are setting up an MOA, just follow the video.
SW2 needs to be set to "Prog Mix 1" or "Prog Mix 2" depending if you want that switch to front or rear dig. Let me know if this works.
