BOOSTED's 2014 build The 5th Dimension: MKII begins:pg 11

[Krawler Konceptz]

Re: CDW rebuild Chumper V2 to RT

Awesome"thumbsup" and glad we could help with your questions. Great chatting on the phone.

Rob

 

[roksloski]

Re: CDW rebuild Chumper V2 to RT



looks good,................but
not much of the rear is going to show when you comp cut it........:ror:

 

[travis c.]

Re: CDW rebuild Chumper V2 to RT

I'm speechless...........................or typeless!:shock:



LOVE IT Steveo!"thumbsup"

 

[Krawler Konceptz]

Re: CDW rebuild Chumper V2 to RT

looks good,................but
not much of the rear is going to show when you comp cut it........:ror:

Then he hangs the plate with wire:mrgreen:

 

[travis c.]

Re: CDW rebuild Chumper V2 to RT

If you could somehow separate the scoop from the hood so when yer drivin it would appear to shake like the real thing, that would be epic!:shock:

A good buddy had one in high school, he drove it how it was supposed to be driven, good memories!"thumbsup"

 

[Erik D_lux]

Re: CDW rebuild Chumper V2 to RT

Yeah, body is sick!

Maybe you could have chosen a tougher skin to apply? Damn, all that pin stripe would have made me pull my hair out.

 

[HARDKNOCKZ]

Re: CDW rebuild Chumper V2 to RT

Lookin good scruffy. Next time bring those skins over & we'll get em a little less...bubblerific. In the meantime...get out the Xacto & cut a relief hole (not an actual hole...a cut. Just a cut) in each & use a credit card (don't worry...it doesn't need to have any room on it :mrgreen & work those fuggers out.

I'm thinkin we need to go out & scratch that fugger up in the mornin. Maybe put that new Hero3 to work since I've had it since Christmas & have only shot myself....um....doin stuff n junk

J-Dizzle fo Rizzle

 

[tapped-out]

Re: CDW rebuild Chumper V2 to RT

Looks good... Is that body for a scaler? Go ahead and cut it up then post up new body pics...

 

[TSK]

Re: CDW rebuild Chumper V2 to RT

Looks good... Is that body for a scaler?

I think this is one of those Class 4 rigs

 

[boosted4lyf]

Re: CDW rebuild Chumper V2 to RT

Awesome"thumbsup" and glad we could help with your questions. Great chatting on the phone.

Rob

Thanks Rob, I do appreciate all the help

looks good,................but
not much of the rear is going to show when you comp cut it........:ror:

I'm hillbilly Mike, ill put that shit in the front window:ror:

I'm speechless...........................or typeless!:shock:



LOVE IT Steveo!"thumbsup"

If you could somehow separate the scoop from the hood so when yer drivin it would appear to shake like the real thing, that would be epic!:shock:

A good buddy had one in high school, he drove it how it was supposed to be driven, good memories!"thumbsup"

Thanks trav, I really miss runnin with ya man. You guys need to take a trip down here the scenery is just amazing, and I happen to know a guy that'd put you up for a couple nights"thumbsup"

Yeah, body is sick!

Maybe you could have chosen a tougher skin to apply? Damn, all that pin stripe would have made me pull my hair out.

Thanks Erik, man you have no idea. I was ready to, as soon as I went to applaud the first panel I wanted to kick myself in the forehead:ror:. But I'm happy with the job.

Lookin good scruffy. Next time bring those skins over & we'll get em a little less...bubblerific. In the meantime...get out the Xacto & cut a relief hole (not an actual hole...a cut. Just a cut) in each & use a credit card (don't worry...it doesn't need to have any room on it :mrgreen & work those fuggers out.

I'm thinkin we need to go out & scratch that fugger up in the mornin. Maybe put that new Hero3 to work since I've had it since Christmas & have only shot myself....um....doin stuff n junk

J-Dizzle fo Rizzle

You know it brutha, ya gonna use a needle and hair dryer that should help some.

Looks good... Is that body for a scaler? Go ahead and cut it up then post up new body pics...

I had to get a few pics of the whole job before I hacked it.

I think this is one of those Class 4 rigs

You shut you mouth round eye! Wait, no, never mind haha wait till you see the skins for the sporty. Remember that flag in my garage?:twisted:


Anywho got her cut and took it out. I absolutly love my little town, so much rock so little time

I knew I'd be letting Burt Reynolds down if I didn't get a few of these:ror:

 

[HARDKNOCKZ]

Re: CDW rebuild Chumper V2 to RT

How wide did yer pooper end up? She looks HUGE in the pics. Yer rigs ass looks wide too. Tee hee.

 

[boosted4lyf]

Re: CDW rebuild Chumper V2 to RT

How wide did yer pooper end up? She looks HUGE in the pics. Yer rigs ass looks wide too. Tee hee.

Ya it's those 750 hubs by the time i got it wrapped up, I didn't feel like changing em.

Oh and there ain't nothing wrong with a fat little jihad beard having redneck with a little junk in the trunk.

 

[TSK]

Re: CDW rebuild Chumper V2 to RT

I love all the rock in your little town too. I'd almost consider moving there but I'd be the only Asian in the mountain.

And I'd rather see that confederate flag on the sporty thana recreation of the swasticka you have tatt'ed on your bum.

 

[Krawler Konceptz]

Re: CDW rebuild Chumper V2 to RT

Love the flying through the air pic"thumbsup"

 

[klabeaume]

Re: CDW rebuild Chumper V2 to RT

Might just been an allusion, but how wide is the rear of that rig?

 

[boosted4lyf]

Re: CDW rebuild Chumper V2 to RT

:ror: not an illusion. It's w i d e I was runnin carbon fibers wheels so I had 750 hubs. I swapped in the SLWs and didn't even think about changing hubs so its over 11":shock: I'm goin to drop in some 225's or 335's to skinny it back up

 

[Farmer]

Re: CDW rebuild Chumper V2 to RT

I see you are a fan of the jump........me loves me some jumps!!!!!!! Body is money"thumbsup"
Later,
Farmer

 

[boosted4lyf]

Re: CDW rebuild Chumper V2 to RT

I see you are a fan of the jump........me loves me some jumps!!!!!!! Body is money"thumbsup"
Later,
Farmer

I likes me some jumps too BUT at 5.25 lbs I like the smaller jumps:ror:
Thanks farmer I've been burning throu your thread like a madman, thanks for the help today"thumbsup"

 

[boosted4lyf]

Re: CDW rebuild Chumper V2 to RT

Looks like I have some 801 TI love comin in from the guys at CHAOTIC. I can't say enough about those guys, cool as ice, helpful as hell, and pretty damn easy on the eyes;-). Got some 1/8 upper and 3/16 lowers. BIG thanks to Marc and Nick"thumbsup"

 

[Illeagle]

Lookin good Steve. I have a pair of 225's if you need em lmk.

Makes me miss my berg. I'm a little curious about the steering on it though. Next time you have the camera out get a lock to lock shot. I see the toe is out just a touch but is it set up for Zero Ackerman? I'd like to fondle it at the comp on the 6th if you can make it.