• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Wth is this? Lol

EddieO said:
Heh, I wasn't implying you didn't sell arms, was simply hinting charlie that I sold armatures and teasing him a bit.....but read it however you like.

I would love to see a 20 awg 5mm web sagami arm 35t though.

Interesting you are moving the purely welded arms after previous comments about it effecting the comm and such.

Later EddieO
Click to expand...

I don't see another way to read it, but you do sell yourself whenever possible so I will take your word for it :flipoff:

I would love to see 35t with 20ga on a 5mm arm too, lets wish for good luck on forcing that to happen :lmao:

Welding does warp the comm more than soldering, but show me a perfect motor and I will bake you a cake!
 
JohnRobHolmes said:
Charlie- Dual motors in a 2.2 on 3s- If you want the typical pep a 35t on 5mm web with a fat pack will be pretty stout, certainly parts breaking central If you want something a bit faster or more powerful a 20ga fat pack is pretty nuts. I can wind up anything you would want.
Click to expand...

JohnRobHolmes said:
about a thousand years when we figure out how to put wire into another dimension so there is enough room
Click to expand...

oh, I read the above post to mean you could wind that. So what size wire is a 5 mm 35t fat pack?
 
I'll make sure I type stuff much more clearly when being a smart ass to someone....just so someone doesn't assume its about or directed at them.

A 35t 5mm with 20 awg is impossible....

What exactly is a 20 awg fatpack? a 30t on 5mm?

And to answer the original posters question.

Your arm looks compression welded (basically a crimp)....my guess its an Integy machine wound armature or some other brand. It is without a doubt not a trinity armature of any kind.

Ok, back to designing new Brushless race motor for Trinity...

Later EddieO
 
Last edited:
EddieO said:
I'll make sure I type stuff much more clearly when being a smart ass to someone....just so someone doesn't assume its about or directed at them.



Later EddieO
Click to expand...


That would be nice so I don't get a bunch of emails on why somebody is saying I don't do so-and-so

backpedal.jpg



Good luck on your motor designing.
 
demonoid369 said:
Where should I look to see if it's welded? Probably help with pics, took two, tried the best lighting but itouchs suck for pics lol instead of putting the pics on here smaller I left them in their original size so hopefully this helps

Edit: still wondering, if I align the notches that it will make it 0 timing, even if the bell is turn all the way around to connect the notches
Click to expand...

Dude, your pics are terrible. you need to turn the macro on, back up just a hair, and and half press the button so it focuses, then fully depress the button"thumbsup"
 
Hope you guys arent fighting or something, you both are kick ass people, (generally i don't like fighting)
 
Yup, I am backpedaling....you got me.

Go read it again, REALLY slowly.

I simply said I know a guy (that would be ME) and he is not in your signature (that would be ME, as I am not in his signature).

No where in that did I say YOU didn't sell armatures. I would never say or imply that, as I know you do and have told people before on here you do.

And really, you found all those emails in your box already in less than 24 hours in the 300+ a day you get?

Later EddieO

JohnRobHolmes said:
That would be nice so I don't get a bunch of emails on why somebody is saying I don't do so-and-so

backpedal.jpg



Good luck on your motor designing.
Click to expand...
 
TheSCorpionKing said:
Dude, your pics are terrible. you need to turn the macro on, back up just a hair, and and half press the button so it focuses, then fully depress the button"thumbsup"
Click to expand...

Huh? It's an itouch, I cant fully depress a button lol it's all touch screen and what is a macro? I mini mackerel? Lol
 
demonoid369 said:
Huh? It's an itouch, I cant fully depress a button lol it's all touch screen and what is a macro? I mini mackerel? Lol
Click to expand...

Then in that case, before snapping the picture, tap the screen (on the item you are taking a picture of) and watch how the vie finder "bursts" and re-focuses. Depending on where you tap on the screen, the white balance and lighting will change. Once it focuses well, take the photo.

This photo was taken with my iphone. The apple i devices have pretty good camaeras.

8f1c44aa.jpg
 
You should be able to tap the screen and it'll focus on where you tap. Unless only iPhones do that.

If you cut the comm and break the brushes in that'll still be a descent runner. I've put a few Integy arms in mod teardowns and they made a good bit more power and torque on the dyno.

As to the other drama, I honestly read that to mean he just said that he sold matched arms. I actually don't see how you could read it to mean that he said John doesn't sell arms. Everyone knows John sells arms. That'd be like saying EeePee doesn't drink beer!
 
Man...

Everyoe just needs to take everything with a grain of salt.

I like both of the "premiere" motor builders who are posting in this thread. Both have always answered any questions I have every had regarding any of their products, or what might be the best solution to my setup & concerns.

Yes I like the HH products I currently own, and I'm excited to try some the Br00d products in the near future. I'm not sponsored or even a competetor, but when I find a product I like, i continue to use them. That said, I try these products because they have established a name for themselves in the crawler community, so it's only fair that I give "newer" product a chance.

I don't care what the other thinks of the other, as that's none of my business, but a little friendly competition is only of great benefit to the end consumer.

P.S. I do love hearing all this RC history being told though.

EeePee drinks beer? OMG. And I found him to be such a role model on this forum. I am terribly disappointed.
 
Last edited:
TheSCorpionKing said:
Man...

Everyoe just needs to take everything with a grain of salt.

I like both of the "premiere" motor builders who are posting in this thread. Both have always answered any questions I have every had regarding any of their products, or what might be the best solution to my setup & concerns.

Yes I like the HH products I currently own, and I'm excited to try some the Br00d products in the near future. I'm not sponsored or even a competetor, but when I find a product I like, i continue to use them. That said, I try these products because they have established a name for themselves in the crawler community, so it's only fair that I give "newer" product a chance.

I don't care what the other thinks of the other, as that's none of my business, but a little friendly competition is only of great benefit to the end consumer.

P.S. I do love hearing all this RC history being told though.

EeePee drinks beer? OMG. And I found him to be such a role model on this forum. I am terribly disappointed.
Click to expand...

Haha ya EeePee is a good role model just got to pretend not to know about the drinking lol jk but I know I just don't like people getting in to fight when it's two really good and awesome guys, now If it was noobs........ Be a different story lol
 
You must log in or register to reply here.

Similar threads

T
Ridgerunner motor upgrades?
Replies
3
Views
300
ferp420
F
R
Axial Wraith rebuild. (Very loud can’t mesh fix)
Replies
7
Views
335
Gula
Gula
V
Volt's FCX10 LC80
Replies
1
Views
164
Gula
Gula
HumboldtEF
LVC triggers hazard lights (From HeyOk Performance)
Replies
9
Views
1K
heyok
heyok
WRXronald
ARKTOS 6x6 - Fusion Mini16 Brushless!!
Replies
15
Views
635
WRXronald
WRXronald
Back
Top