|
| LinkBack | Thread Tools | Display Modes |
06-18-2012, 11:03 PM | #1 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| 1.9 to 2.2 axial scx10 work in progress
Hey i dont have a mini anymore. I have an scx10 with a bronco body. It starded as just a plain scx10 with aluminum lockouts, c hubs and knuckles. All plastic homemade links and 1.9s. It has axial fenderflares and had a roof rack (i didnt like it, too much of a hang up point). Im going to try and maybe relocate it somewhere inside the body. It had 4 axial aluminum threaded scaler piggyback dual spring shocks, now only 2 in front and 2 losi night crawler shocks in back. Had 1.9 flat iron on losi mini pro aluminum beadlocks, now i have 2 sets of 8 hole proline beadlocks (black with grey rings, and chrome with black rings) and a set of orange, custom narrowed 8 hole chrome axial beadlocks. I went from venom ridglines after the flatirons, to the venom tires, to rock lizards, and im currently sporting the 2.2 BOGGERS un trimmed. I had an integy 55 turn brushed motor and novak rooster non crawler esc. Now i have an 18.5t novak goat system. A stock losi mini controller for now, and a spektrum sr300 reciever. My servo is a hitec645 for now too. Let me know ehat you think. I will try and post some pics up. And my links have changed since i got it lol
|
Sponsored Links | |
06-19-2012, 11:36 PM | #2 |
I wanna be Dave Join Date: Dec 2009 Location: Outside DC
Posts: 2,997
| Re: 1.9 to 2.2 axial scx10 work in progress
Threads started in the build section without pictures are going to get very little attention. Always post pictures! |
06-19-2012, 11:38 PM | #3 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
I really want to but i am still attempting to do it from my phone. I have a TON of build pics. What i got it as to what it is now. Every step of the way almost
|
06-19-2012, 11:43 PM | #4 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
Im not a newer ford fan. But that things sick. And i know i have a bronco body but i want a chevy or toyota body
|
06-20-2012, 12:28 AM | #5 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress This is my bronco right now. |
06-20-2012, 09:14 PM | #6 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress This is when i first got it |
06-28-2012, 02:47 AM | #7 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress |
06-28-2012, 04:47 AM | #8 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: 1.9 to 2.2 axial scx10 work in progress
Rig looks good and very familiar. You go crawlin with or are buddies with 89xlmorepower right?
|
06-28-2012, 10:15 AM | #9 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
Yeah i am buddies with him. And thank you. Im looking to put a different body on it soon
|
06-28-2012, 10:18 AM | #10 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
This novak motor is finding all of my drivetrains weak points. Last time i webt out with chris, my front output shaft snapped off so i got an upgraded one. Then last sunday i took it out and my idler gear finally went out.
|
06-30-2012, 08:03 PM | #11 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
So i got the axial metal idler gear and robinson racing trans input gear to conclude my trans for now before i fully upgrade it to a vanquish housing
|
07-01-2012, 08:10 AM | #12 |
I wanna be Dave Join Date: Apr 2012 Location: Merrill, WI
Posts: 2,328
| Re: 1.9 to 2.2 axial scx10 work in progress
Good deal man! Trans should be bulletproof now! |
07-01-2012, 01:55 PM | #13 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
Yep. I just got a spektrum dx3 controller with the 3rd channel mod
|
07-04-2012, 09:53 PM | #14 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
I have officially decided to buy a new steering servo
|
07-04-2012, 11:56 PM | #15 |
Rock Crawler Join Date: Nov 2011 Location: Paradise, ca
Posts: 890
| Re: 1.9 to 2.2 axial scx10 work in progress
Go jr servos
|
07-06-2012, 08:34 AM | #16 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
Imgonna go with one of the good hitec servos.
|
07-07-2012, 01:41 AM | #17 |
Rock Crawler Join Date: Oct 2011 Location: Another place, another time
Posts: 575
| Re: 1.9 to 2.2 axial scx10 work in progress
That is a nice pic, should have been just the Bronco though. Not dissing on the MRC, I have one myself. Just kills the scale look. . |
07-07-2012, 04:52 PM | #18 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
Thank you, and i know it does bit that was a pic of me and my 6 year old little brother wheeling together
|
07-07-2012, 11:47 PM | #19 |
Quarry Creeper Join Date: Dec 2011 Location: Willows
Posts: 436
| Re: 1.9 to 2.2 axial scx10 work in progress
My boggers have pretty much broken in already, but my bronco is gonna get some wraith axles soon : D
|
07-08-2012, 01:03 AM | #20 |
I wanna be Dave Join Date: Nov 2008 Location: Chillin in Utardia
Posts: 2,561
| Re: 1.9 to 2.2 axial scx10 work in progress
Cool build....I like the beefy 2.2. I say raise her a bit to have that bogger look and have less tire rubbage. Yup just made that word up.
|
Tags |
1.9s, 2.2s, axial, scaler, scx10 |
1.9 to 2.2 axial scx10 work in progress - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCX10 2.2 Work in Progress | alexchen86 | Axial SCX-10 | 3 | 06-20-2010 07:41 PM |
work in progress | dub599 | Paint and Body | 32 | 12-19-2009 11:38 AM |
work in progress | uberalles | Losi Mini-Rock Crawler | 14 | 10-17-2008 05:43 PM |
Work In Progress | BrockGrimes | 2.2 Scale Rigs | 12 | 04-26-2007 05:21 PM |
work in progress very,very slow progress! | rednekcrwlr | Tamiya Clod Buster | 6 | 12-18-2006 09:48 PM |
| |