|
| LinkBack | Thread Tools | Display Modes |
12-10-2008, 03:42 PM | #1 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
| finally started build............
well after a while of reading till my eyes were red....asked a bunch of questions that a lot have answered quickly, thx to all ....i have been following 4 or 5 builds by some as bender, tanis and some others that knew what they were doing, thx....after reading what has, hasn't worked and used a few idea's from each....right now i have what i could get done till i get the baby shark bender fer my tube frame and some skid material to make some different skids to try....i read a lot bout parts that work well and have bought most of what i thought would be a good start, from vendors here RPP, Holmes, TCS just waiting for word on yota when bonus line lockers will be ready....but i did get some SS lockers fer now....here's some pic's fer now till i can start bending tube, won't go into detail as most know parts when they see them, thx fer looking ............bob axles....HD gears |
Sponsored Links | |
12-10-2008, 03:43 PM | #2 |
Newbie Join Date: Dec 2008 Location: Dunedin
Posts: 5
|
Lookin' good
|
12-10-2008, 03:45 PM | #3 |
Quarry Creeper Join Date: Nov 2008 Location: 540 Mabuchi Motorola?
Posts: 201
|
nice soldering iron! also nice radio! AND nice straight axles!!!
|
12-10-2008, 03:46 PM | #4 |
Quarry Creeper Join Date: Nov 2008 Location: 540 Mabuchi Motorola?
Posts: 201
|
oh yeah and those deans wires will have you at the best crawling potential |
12-10-2008, 03:58 PM | #5 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
|
Yep! That looks like a damn good start! Good reading comprehension!
|
12-10-2008, 04:04 PM | #6 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
i didn't start with any kit i just boughts the stuff that most likely get changed out anyway....parts i went with for the axles are STNC straight axle lock out in orange, axial CVD's and there clockable C hubs and knuckles and just bought bearings, housing on there own....cougars mounted on VP dirty harrys comp wheels in orange, kinda going for an orange theme on the tube farme also....bought good electrics DX3R w/3100 rx, hitec 225 for dig and 7955 for steering, CC BEC and sidewinder ESC with holmes handwound 540 powered with 10 cell elight 1500 saddle pack and deans all around....bought all the fastners from RTL in 50 packs each piece so i'll have spares....3/16" brake line using safety-silve 45 to braze it up....i'm making all my plates i'll need from 1/8" alum stock plus with the dubro rod ends and 6/32 threaded rod i'm taping the 3/16" brake line to use them in i'm making my own links to go with the losi 4" shocks....not sure if to droop or sprung yet, i'm sure i left something out i don't remember now ...........bob .... |
12-10-2008, 04:42 PM | #7 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
hmmm i missed a picture and i'm using a DNA dig ...............bob .... |
12-10-2008, 04:54 PM | #8 |
Rock Crawler Join Date: Jul 2006 Location: Kelowna BC Canada
Posts: 691
|
bling bling |
12-10-2008, 05:31 PM | #9 |
RCC Addict Join Date: Dec 2007 Location: Moncton, NB, Canada
Posts: 1,962
| |
12-10-2008, 06:10 PM | #10 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
yeah tell me bout it ....i'm starting from scratch since i was last into R/C back in the 80's....right now all this stuff is new, just under 1900.00 bucks....that's why i'm building most of the stuff i can tube frame, links, all servo and link plates i like to get my moneys worth..............bob .... Last edited by bob1961; 12-11-2008 at 08:44 PM. |
12-11-2008, 12:09 AM | #11 |
Quarry Creeper Join Date: Sep 2008 Location: centennial
Posts: 230
|
damn... lol ill take anything you cant use off your hands lol. nice start
|
12-11-2008, 01:11 AM | #12 |
RCC Addict Join Date: Apr 2008 Location: Sacramento
Posts: 1,210
|
Wow that's looking nice, and that's a hell of a battery you got there, it should give you plenty of punch and wheel speed...I also like all the aluminumparts too, I see those in my future...
|
12-11-2008, 08:12 PM | #13 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
here's the tube frame plans, the shock and link holes aren't put in yet....each color line will be all one lenght of 3/16" brake line in that color....the blue lines will will be 3 pieces, one below and 2 above the red lines....each square is 1"x1" so this will be within comp spec's.......bob .... Last edited by bob1961; 12-12-2008 at 05:44 AM. |
12-13-2008, 12:15 AM | #14 |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
|
what size battery pack is that? and im jealous...looks like xmas ends up starting a little sooner for you!
|
12-13-2008, 12:28 AM | #15 |
Quarry Creeper Join Date: Nov 2008 Location: 540 Mabuchi Motorola?
Posts: 201
| |
12-19-2008, 01:48 PM | #16 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
| |
12-19-2008, 02:31 PM | #17 |
Quarry Creeper Join Date: Mar 2008 Location: richmond
Posts: 240
|
lol.........you must have deep pockets and a very understanding wife!!
|
12-19-2008, 03:09 PM | #18 |
I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
|
this build makes me excited in the pants. I really like how you are going about it. Keep up the good work |
12-19-2008, 03:20 PM | #19 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
| |
12-19-2008, 04:14 PM | #20 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| |
| |