6 Attachment(s) This is my first crawler. The AX-10,000 Tribute Truck. Dedicated to: Axial ”axialracing.com” – Thank you for making such a complete crawler. I was not going to buy a Clod (or other), just to throw 70% of the kit away (not to mention all the R&D that goes into making a competitive truck from scratch). Thank you! Hobby Alley – Edmonton, AB. "http://hobbyalley.com" (Support your local Hobby Shop!) Bender “bendercustoms.com” – Where would the World of Crawling be today without Bender? (Yes… this truck is your fault too!) Special thanks to: Jason – For his “Live AX-10 Build”, allowing me to plan my build while I awaited delivery (Dog Sleds to Canada were all booked!). “http://www.rccrawler.com/forum/axial-ax-10-scorpion/79879-live-axial-ax-10-build.html#8221; RC Crawler – For providing those of us still learning to crawl, this fantastic meeting place (I’ll pay for the pastry, but I have a “star” so the coffee should be free!). More Information: http://www.rccrawler.com/forum/axial-ax-10-scorpion/87191-axial-ax-10-000-rock-climber.html 8) |
New to RCC not to the scene. Here is my AX, built it this week. Specs: Integy 45t inDi 16x2-Pro Charger Junky Battery Pack (6 cell Ni-Cad) NOSRAM Tomahawk SC (w/ reverse) - stolen from my HPI HPI RX-2 Reciever (also obviously stolen) mounted on top of my servo HPI TX-2 Controller JRSport ST126MG Hi-Torque steering servo Cut foam in tires, weighted rims (lead) Flipped Rear Links Sort of custom/janky servo horn To do: Flip tranny around different body? higher turn motor better battery front axle pack mount? http://i191.photobucket.com/albums/z...0/DSCF1736.jpg http://i191.photobucket.com/albums/z...0/DSCF1737.jpg http://i191.photobucket.com/albums/z...0/DSCF1738.jpg http://i191.photobucket.com/albums/z...0/DSCF1739.jpg http://i191.photobucket.com/albums/z...0/DSCF1740.jpg :D |
Axial Scorpion AX10 New Body! BEFORE: http://i63.photobucket.com/albums/h1...2/scorp002.jpg AFTER: http://i63.photobucket.com/albums/h1...pbugondesk.jpg http://i63.photobucket.com/albums/h1...bugondesk2.jpg http://i63.photobucket.com/albums/h1...bugondesk3.jpg I know, I know, it's on my desk and not on the rocks...I will post some of those later. I just wanted to get some posted before the body gets trashed (which it will soon)! |
Integy 65T Tekin Rebel 2 (hopefully soon Rooster Crawler) 4WS, switchable stock http://i124.photobucket.com/albums/p...r/b177a19d.jpg and slightly upraded with HPI Baja TT body, WK springs, stronger servos, LiPo 2S/2000mAh battery http://i124.photobucket.com/albums/p...r/b776aa50.jpg |
|
|
Here is my 6x6 t rex. here is the link to the build thread. http://www.rccrawler.com/forum/axial-ax-10-scorpion/86295-t-rex-6x6.html http://i227.photobucket.com/albums/d...1/S5000656.jpg http://i227.photobucket.com/albums/d...1/S5000653.jpg http://i227.photobucket.com/albums/d...1/S5000657.jpg http://i227.photobucket.com/albums/d...1/S5000658.jpg |
This is my first or second post, can't remember. Any way, I wanted to share with you guys some pictures of my AX10. I will eventually get the TCA frame and make it a 1.9 scale crawler, but till that is out, here are some pics on the way it is for now, stock !! http://farm3.static.flickr.com/2366/...8c325f07_b.jpg http://farm3.static.flickr.com/2050/...fdf99716_b.jpg http://farm3.static.flickr.com/2029/...47336e52_b.jpg http://farm3.static.flickr.com/2260/...2642fe47_b.jpg Thanks. |
Here is my crawler FINALLY. http://www.freewebs.com/bodywerx/HPIM1311.jpg Here is my comp body http://www.freewebs.com/bodywerx/HPIM1309.jpg |
general lee 1 Attachment(s) what yo think |
Just finished my build tonight. Sorry for the crappy pics, need to get a new camera. Still saving up for a good speed controller but all put together. Excuse the temp body, this one is almost 15 years old and has seen some action. Gonna take a little time to pick the right body and paint it. http://home.comcast.net/~srobertsfsj/temp/build01.jpg http://home.comcast.net/~srobertsfsj/temp/build01.jpg http://home.comcast.net/~srobertsfsj/temp/build02.jpg http://home.comcast.net/~srobertsfsj/temp/build02.jpg http://home.comcast.net/~srobertsfsj/temp/flex03.jpg http://home.comcast.net/~srobertsfsj/temp/flex03.jpg http://home.comcast.net/~srobertsfsj/temp/build04.jpg http://home.comcast.net/~srobertsfsj/temp/build04.jpg Scott R. |
My AX10 so far! http://pic20.picturetrail.com/VOL124.../284009383.jpg http://pic20.picturetrail.com/VOL124.../284009379.jpg http://pic20.picturetrail.com/VOL124.../284009378.jpg http://pic20.picturetrail.com/VOL124.../284009377.jpg Motor: Integy 55T Lathe ESC: Rooster Crawler Servos: JR Racing Z650M Radio: Futaba 4VWD |
my hunk o nasty Extreme Paint body 55 turn 1500 pack R1 radio dropped/flipped shocks-50/50 old ae blue springs for t-maxx (soft) hilift springs and a couple spacers 70 weight oil 1500 pack on links receiver on servo weight everywhere, going to balance when i have time for 60/40 ziptied battery plate horizontal to drop esc inline with RX batt motor body cut and lowered more to come http://i221.photobucket.com/albums/d...S5007810-1.jpg http://i221.photobucket.com/albums/d...7/S5007885.jpg |
http://www.bluemonster-rc.com/ax10/scorpion_16.jpg http://www.bluemonster-rc.com/ax10/scorpion_17.jpg Tube chassis Rooster 65T etc etc etc... |
my ax-10 http://i38.photobucket.com/albums/e1...4/DSC01935.jpg http://i38.photobucket.com/albums/e1...4/DSC01931.jpg just finished mine, intergy 55t motor,jr st126mg servo and xl-5 esc, this friggen thing rocks"thumbsup" |
My Blazer pics here's some shots of my first crawler, its painted to match my 1:1 blazer when I first got it: http://i92.photobucket.com/albums/l2...9/DSC01827.jpg http://i92.photobucket.com/albums/l2...9/DSC01817.jpg http://i92.photobucket.com/albums/l2...9/DSC01819.jpg http://i92.photobucket.com/albums/l2...9/DSC01840.jpg http://i92.photobucket.com/albums/l2...9/DSC01846.jpg http://i92.photobucket.com/albums/l2...9/DSC01845.jpg |
My betty 4 Attachment(s) Well here she is almost ready for the trail, just waiting on my Goat crawler to come back from warranty. Hope you all like her, will post some action pics after the motors in it. |
added some more things added the goat..which is simply amazing also put the front spacers inside the shocks, and added the saddle pack from holmes hobbies, the rig drives like a dream now, except the rear end is too light http://i103.photobucket.com/albums/m...k/IMG_1544.jpghttp://i103.photobucket.com/albums/m...k/IMG_1546.jpg http://i103.photobucket.com/albums/m...k/IMG_1542.jpg http://i103.photobucket.com/albums/m...k/IMG_1543.jpg http://i103.photobucket.com/albums/m...k/IMG_1541.jpg http://i103.photobucket.com/albums/m...k/IMG_1540.jpg |
one more axial 2 Attachment(s) just got done with this, it has the CKRC stage#2 and disconnect, it crawls like mad. |
My first spray painting attempt using a stencil and mixing colours http://homepages.slingshot.co.nz/~ga...p/scorpion.JPG |
My GREEN CRAWLER Model AX10 Scorpion STD version ESC - Novak Rooster Crawler brushed version Motor - LRP TRuck Puller II Stering Servo - ACE Digital Servo DS1313 Location - Dolimiti - Italy Little Video, here http://it.youtube.com/watch?v=UQNipvGHYNA http://i169.photobucket.com/albums/u...t2064Large.jpg http://i169.photobucket.com/albums/u...t2062Large.jpg http://i169.photobucket.com/albums/u...t2061Large.jpg http://i169.photobucket.com/albums/u...t2046Large.jpg http://i169.photobucket.com/albums/u...st001Large.jpg http://i169.photobucket.com/albums/u...st007Large.jpg http://i169.photobucket.com/albums/u...st012Large.jpg http://i169.photobucket.com/albums/u...st021Large.jpg |
novak goat R2 Disconnect + more:twisted: http://img155.imageshack.us/img155/6353/pa240588il7.jpg http://img155.imageshack.us/img155/8131/pa230578dq8.jpg http://img513.imageshack.us/img513/6213/pa230471kb2.jpg |
Thanks to Adam for a awsome Axial Tuber |
Two more for s--ts and giggles |
My updated pics. Specs: Integy 55 turn lathe motor. Mamba Max ESC. Hi-Tec 645mg servo. Moab tires w/star cut foams and airsoft BB's. Clearanced rear lowers, and homemade 4-link. Droop setup with internal springs. http://i191.photobucket.com/albums/z..._c/ax102-1.jpg http://i191.photobucket.com/albums/z..._c/ax103-1.jpg http://i191.photobucket.com/albums/z...r_c/ax1013.jpg http://i191.photobucket.com/albums/z...r_c/ax1015.jpg http://i191.photobucket.com/albums/z...r_c/ax1016.jpg http://i191.photobucket.com/albums/z...r_c/ax1017.jpg |
55T motor DuraTrax IntelliSpeed 16T ESC Traxxas TQ3 2 Channel radio Hi-tec 645MG steering servo Stock gearing Custom roll bar http://a319.ac-images.myspacecdn.com...a92f03c526.jpg http://a64.ac-images.myspacecdn.com/...8dc2b8bf6f.jpg ^ Can you say "ridin' dirty" ^ http://a168.ac-images.myspacecdn.com...4ca21c4157.jpg |
Mamba Max ESC Black Revolver brushless motor 3s 1500mah lipo http://i91.photobucket.com/albums/k2...0/DSC02079.jpg http://i91.photobucket.com/albums/k2...0/DSC02117.jpg http://i91.photobucket.com/albums/k2...0/DSC02108.jpg http://i91.photobucket.com/albums/k2...0/DSC02118.jpg http://i91.photobucket.com/albums/k2...0/DSC02111.jpg |
3 Attachment(s) This is my AX10 it has a 65t, digg, revo shafts, bent links, and maxx shocks. |
Range Rover crawler Heres mine nothing spectacular, only mods are the rear bent links. 55T lathe motor, crappy ESC and battery. Moabs Body is of unknown origin and is over 20yrs old and no I didnt paint it was painted when brought. http://img.photobucket.com/albums/v2...NUTTER/004.jpg http://img.photobucket.com/albums/v2...NUTTER/003.jpg http://img.photobucket.com/albums/v2...NUTTER/002.jpg |
AX10 Scorpion 2 Attachment(s) Pretty much stock, But no green body. Lathe 55 Moped ESC Airtronics MX3 radio Losi Claws 2.2 Hobbico CS70 MG servo http://www.rccrawler.com/forum/images/attach/jpg.gifhttp://www.rccrawler.com/forum/images/attach/jpg.gif |
|
Crawler in japan japanese Ax10 ESC - Novak Rooster Crawler Motor - kawada MX6 60T Gear - 14t-90t Stering Servo - 1630MG 4WS, switchable BendedLinks&Skidguards - speedeay pal Location - iwaya - japan my blues mobile http://i220.photobucket.com/albums/d...9/DSC00113.jpg Little Video, here http://f.flvmaker.com/mc2.php?id=Kxr...kKix&logoFlg=Y http://f.flvmaker.com/mc2.php?id=/lr...kKix&logoFlg=Y http://f.flvmaker.com/mc2.php?id=R4r...kKix&logoFlg=Y tahnks Rccrawler.com staff & all members :) have a nice Rockcrawlin' :razz: and thanks to mamy support rajiten totuka staff "thumbsup" Mr.Sizuka Mr.Itioka Mr.fujiii |
Stock AX10 Reedy Firehawk geared 12-87 Futaba MC230CR ESC JR Z650M servo Hacked RC10T body http://www.rc10talk.com/download/file.php?id=4592 http://www.rc10talk.com/download/file.php?id=4589 http://www.rc10talk.com/download/file.php?id=4588 Got a vintage RC car? Visit http://www.RC10talk.com |
1 Attachment(s) Here's my two guys. Both run Spektrum, LRP AI ESC, Integy 65t, Hitec 6545MG one is mainly box stock with homemade upper 4link and bent lower links. the other is my 1.9 buildoff entry. axial tranny and axles and stock skid. the rest is homemade. |
Stock apart from TCS boomerang and servo link mounts. Integy Pro Matrix 45T Mtronics Eco20 ESC Hitec 645MG Futaba RX http://img.photobucket.com/albums/v1...1/P1000222.jpg http://img.photobucket.com/albums/v1...1/P1000216.jpg http://img.photobucket.com/albums/v1...1/P1000218.jpg |
My Axial Integy V10 65T Mamba Max ESC ServoTOWER PRO http://i240.photobucket.com/albums/f...9112007004.jpg http://i240.photobucket.com/albums/f...9112007005.jpg http://i240.photobucket.com/albums/f...6112007003.jpg http://i240.photobucket.com/albums/f...6112007005.jpg http://i240.photobucket.com/albums/f...o/06112007.jpg |
futaba 2.4...rooster crawler...hitec-5995tg...55t mtr...2400 nimh... bent revo links...mugen shocks...proline H2...moab M3's...over the top steering 3 link F/4 link R...axle mounted batt/servo...UHMW rock rails..lexan rx/esc mount http://i240.photobucket.com/albums/f...3/DSC00978.jpg http://i240.photobucket.com/albums/f...3/DSC01081.jpg |
Ckrc Stage Ii 5 Attachment(s) Mamba Max 45t Stage Ii Mod 2c Lipo Not Green |
1 Attachment(s) My son's AX-10. |
Bubba's AX-10 and AX-10 tuber Well here's my pair of AX-10's 1st is stock chassis 65t integy Moped esc Associated GT rear springs Nissan Titan and Betty body http://www.chitownrc.com/imagehostin...e57eb5060f.jpg http://www.chitownrc.com/imagehostin...e57ebdcbc8.jpg http://www.chitownrc.com/imagehostin...e57ec7c857.jpg http://www.chitownrc.com/imagehostin...5646aa72c1.jpg Will update the tuber when finished! "thumbsup" |
All times are GMT -6. The time now is 12:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com