The unofficial official axial portal buggy.

[MaX-D]

Originally Posted by Frank211

Really good question. Maybe dual stage soft foams, cuz the Duratrax foams, really soft.

Which ones though?

Sent from my LM-G710VM using Tapatalk

[Frank211]

Originally Posted by MaX-D

Which ones though?

Sent from my LM-G710VM using Tapatalk

Maybe CIs or PLs OR a new foam from Duratrax????

[rockspider]

Would Capra be class3 Sorrca legal?
Body looks very narrow, maybe too much to be rule compliant. Is there the official measure somewhere?

[GrimmTheTourist]

i used ci 4.5 dual stage in the duratrax deep woods. they work well on the trx



Gesendet von meinem TA-1004 mit Tapatalk

[MaX-D]

Originally Posted by GrimmTheTourist

i used ci 4.5 dual stage in the duratrax deep woods. they work well on the trx

Gesendet von meinem TA-1004 mit Tapatalk

Good to know. Thanks

Sent from my LM-G710VM using Tapatalk

[JatoTheRipper]

Originally Posted by Frank211

Maybe CIs or PLs OR a new foam from Duratrax????

Duratrax is releasing new foams? Or are you just speculating that maybe these tires have new foams in them?

[Frank211]

Originally Posted by JatoTheRipper

Duratrax is releasing new foams? Or are you just speculating that maybe these tires have new foams in them?

Yes, just speculating.

Would be nice tho.

[JatoTheRipper]

Originally Posted by Frank211

Yes, just speculating.



Would be nice tho.

Yes, it would be!

[hibbs]

I pre-ordered parts for a front steering axle so hopefully I can make it a 4WS truck in the initial build.

[punkindrublik]

My willpower sucks. Pulled the trigger...

[forty2]

Originally Posted by rockspider

Would Capra be class3 Sorrca legal?
Body looks very narrow, maybe too much to buy rule compliant. Is there the official measure somewhere?

I've been looking for an official measurement and haven't seen one yet, it looks pretty close though. I plan on building it box stock right away, but ditching the plastic for a steel cage before 2020 when intend to run it in class 3. If it's too narrow out of the box I'll fix it in fab.

[hibbs]

Originally Posted by forty2

I've been looking for an official measurement and haven't seen one yet, it looks pretty close though. I plan on building it box stock right away, but ditching the plastic for a steel cage before 2020 when intend to run it in class 3. If it's too narrow out of the box I'll fix it in fab.

I was thinking to do the same. I’d love to stick a Jeep TJ nose on it. Guess that’s kinda ruin the WE crawler aesthetic and be more U4. If it’d even fit right. I just don’t care for the front end all that much.

[hibbs]

Originally Posted by forty2

I've been looking for an official measurement and haven't seen one yet, it looks pretty close though. I plan on building it box stock right away, but ditching the plastic for a steel cage before 2020 when intend to run it in class 3. If it's too narrow out of the box I'll fix it in fab.

I was thinking to do the same. I’d love to stick a Jeep TJ nose on it. Guess that’d kinda ruin the WE crawler aesthetic and be more U4. If it’d even fit right. I just don’t care for the front end all that much.

[JatoTheRipper]

Originally Posted by hibbs

I was thinking to do the same. I’d love to stick a Jeep TJ nose on it. Guess that’s kinda ruin the WE crawler aesthetic and be more U4. If it’d even fit right. I just don’t care for the front end all that much.

The front is the only visual part that I really don't like.

[awdtsi]

Originally Posted by punkindrublik

My willpower sucks. Pulled the trigger...

HAHA, same here. I'm pretty excited about this one. Ordered the 5.4" tall boggers too.

[durok]

Originally Posted by JatoTheRipper

The front is the only visual part that I really don't like.

My thoughts, exactly. She's a little droop-snoot...

(Beach Boys "Little Deuce Coupe")

[JatoTheRipper]

Yep, but I plan on doing something about it...

Capra C10

[MAC FAB]

Build a bumper with a skid plate. Easy peasy and the look is changed. Grill is the front side if the battery box, right?

[durok]

Originally Posted by JatoTheRipper

Yep, but I plan on doing something about it...

Capra C10

That's pretty darn cool!

Sigh, I wish I had a 3-d printer. 'Course then I would have dive off into the world of 3-d design as well, and I'm not sure if I have the free time needed for doing it right.

[durok]

Originally Posted by MAC FAB

Build a bumper with a skid plate. Easy peasy and the look is changed. Grill is the front side if the battery box, right?

I get where you're coming from, but from my perspective on things, it's the front end and the way the front corners of the cage tubing is arched. I'd really have to study one in the flesh for a while to figure out how to change that with something that bolts on but clears the suspension and tires...

Of course it might start growing on me with the passage of time. It's not even out yet, and even one painted a certain way might minimize the effect. Also, aluminum panels could be interesting. For example, I really prefer my Bomber with the different front stinger I got from Desert Rat RC Designs and the aluminum full sides from Carter Fab, and the hood from AMF.