RCCrawler Forums

BENDER · 02-11-2009, 03:13 PM

Quote:

Originally Posted by Mini

Just by any chance are you going to make the fans work also cause that would really be insane

.

Am pretty sure you thought about it already but make sure you mount a wink to the front of whatever bumper you mount up there

Looking foward to the vid.

I'm still not sure if I'll wire up the fans yet or not, we'll see. I do have a winch for the front, but not sure if I'm going to mount it yet or not either. I'm messing around with some HPI bumpers to see how it all fits.

Quote:

Originally Posted by NeXt559

me likey

didnt notice what esc and motor combo you put in there but w/ all that extra weight relativly high up and to the rear, this thing would probabbly be doing wheelies like there's no tommorrow

the fans, fuel cell, well, and spares are a great touch, now only if they made a 1/10 scale brad dumont action figure.

Thanks. The ESC and motor in the pics are prototypes, that's about all I can say right now. I'm probably going to switch over to a 12t Slash motor and my old Super Rooster and see what kind of speed I get with that combo. There is a lot of weight up high in the rear, but with all the electronics out front it is fairly balanced right now. We'll see if the 12t motor will pull the front end up or not.

hibbs · 02-11-2009, 04:07 PM

I was inspired by your creativity and happen to have a proline F150 body handy and about 4-5 blank CD cases too... You see where this is going...

So I've mounted the front 2 wheel wells and they're looking great, still have to finish rears and paint everything up.

Can't wait to see your finished product, amazing work!

waterweezel · 02-11-2009, 06:20 PM

All I can say is WOW! Brad that is one sweet build you have going on..Inspiring as always

ZUKMAN · 02-13-2009, 09:26 AM

This build deserves to stay on the front page.....

So I'm bumping this bitch back there.

punkuup5150 · 02-13-2009, 09:40 AM

bender i put a 27t motor in my rig and on carpet it wheelies no prob. wheelies much better without the body on since the frame rail cap slides really well on the carpet and keep the rig pointed straight. looking good as allways cant wait to see what else you make me want to add to my rig.

f-350highlift · 02-13-2009, 05:08 PM

Quote:

Originally Posted by BENDER

Can't have a pre-runner without some spare tires.

i like the rig ..the chunk of moab is a nice touch.

DeaDShorT · 02-15-2009, 04:16 PM

Damn, Brad!! You know you should try this stuff for a living or something, you're pretty good at it

. This rates up there with the silver F150 prerunner you built awhile ago...I see alot of similarities. Very inspirational

stublet · 02-15-2009, 09:56 PM

looks like you're trying to get a puma sponsorship with those silver stripes the way they are

just givin you a hard time, that rig looks awesome, keep up the good work

ajcloud · 02-16-2009, 07:41 AM

do i need to be ashamed that i already got the same body and intend to copy your work? dont worry, though, everyone who knows me will know these weren't my ideas at all. wicked work man, love your stuff.

i put a mamba max with the 4600kv and it is so fun, and it crawls also. just gotta work the throttle and get it all set up right on the esc.

ajcloud · 02-16-2009, 05:16 PM

well we had mine out today, with the 2 cell 5400 lipo and the 4600 it ran for over an hour, and it was a total blast. thanks for the inspiration. when i get the pics emailed i will post one up.

Crawler Noob · 02-16-2009, 05:25 PM

balling build is all i can say.

BENDER · 02-17-2009, 10:50 AM

Quote:

Originally Posted by hibbs

I was inspired by your creativity and happen to have a proline F150 body handy and about 4-5 blank CD cases too... You see where this is going...

So I've mounted the front 2 wheel wells and they're looking great, still have to finish rears and paint everything up.

Can't wait to see your finished product, amazing work!

Quote:

Originally Posted by waterweezel

All I can say is WOW! Brad that is one sweet build you have going on..Inspiring as always

Quote:

Originally Posted by ZUKMAN

This build deserves to stay on the front page.....

So I'm bumping this bitch back there.

Thanks for the compliments guys.

Quote:

Originally Posted by punkuup5150

bender i put a 27t motor in my rig and on carpet it wheelies no prob. wheelies much better without the body on since the frame rail cap slides really well on the carpet and keep the rig pointed straight. looking good as allways cant wait to see what else you make me want to add to my rig.

Nice!!

Quote:

Originally Posted by f-350highlift

i like the rig ..the chunk of moab is a nice touch.

Quote:

Originally Posted by DeaDShorT

Damn, Brad!! You know you should try this stuff for a living or something, you're pretty good at it

. This rates up there with the silver F150 prerunner you built awhile ago...I see alot of similarities. Very inspirational

Quote:

Originally Posted by stublet

looks like you're trying to get a puma sponsorship with those silver stripes the way they are

just givin you a hard time, that rig looks awesome, keep up the good work

Thanks again guys.

Quote:

Originally Posted by ajcloud

do i need to be ashamed that i already got the same body and intend to copy your work? dont worry, though, everyone who knows me will know these weren't my ideas at all. wicked work man, love your stuff.

i put a mamba max with the 4600kv and it is so fun, and it crawls also. just gotta work the throttle and get it all set up right on the esc.

Thanks man, no worries on using my ideas it's a compliment to me.

Quote:

Originally Posted by ajcloud

well we had mine out today, with the 2 cell 5400 lipo and the 4600 it ran for over an hour, and it was a total blast. thanks for the inspiration. when i get the pics emailed i will post one up.

Nice, sounds like fun.

Quote:

Originally Posted by Crawler Noob

balling build is all i can say.

Thanks.

I got the Hellfire bumper mounted up with some .090 aluminum flat stock. Bent it 90* then drilled holes in the stock front chassis brace to attach it.

JAM MaxAmps.com · 02-17-2009, 10:57 AM

You now know your required to take that to the scale nats this year.

Jason

Grizzly4x4 · 02-17-2009, 05:06 PM

I'm envisioning a whole new segment for the SCX-10........a scale prerunner racing class.

badger · 02-17-2009, 05:10 PM

Quote:

Originally Posted by Grizzly4x4

I'm envisioning a whole new segment for the SCX-10........a scale prerunner racing class.

Yeah, now I need a second SCX-10!

AeroSynch · 02-17-2009, 05:11 PM

Where is the bumper from? How wide is it? Thank you.

BENDER · 02-18-2009, 01:18 PM

Quote:

Originally Posted by JAM MaxAmps.com

You now know your required to take that to the scale nats this year.

Jason

I've heard that a few times now. ;)

Quote:

Originally Posted by Grizzly4x4

I'm envisioning a whole new segment for the SCX-10........a scale prerunner racing class.

Quote:

Originally Posted by badger

Yeah, now I need a second SCX-10!

I'm in, thanks for the chance!!

Quote:

Originally Posted by AeroSynch

Where is the bumper from? How wide is it? Thank you.

It's off an HPI Hellfire. The overall width is 6 3/4".

Xtant3150c · 02-18-2009, 02:42 PM

This thing just keeps getting better

The Hellfire Bumper is a great match to the Diablo body

BENDER · 02-18-2009, 05:54 PM

Quote:

Originally Posted by Xtant3150c

This thing just keeps getting better

The Hellfire Bumper is a great match to the Diablo body

Thanks.

I finally got the inner fenders sanded/painted black.

Matt.k · 02-18-2009, 06:33 PM

Now you need to cut out the windows, build an interior with roll cage and have some real window netting!

02-11-2009, 04:07 PM	#122
hibbs Quarry Creeper Join Date: Feb 2008 Location: US Posts: 401	I admire your skills I was inspired by your creativity and happen to have a proline F150 body handy and about 4-5 blank CD cases too... You see where this is going... So I've mounted the front 2 wheel wells and they're looking great, still have to finish rears and paint everything up. Can't wait to see your finished product, amazing work!

02-15-2009, 04:16 PM	#127
DeaDShorT RCC Addict Join Date: Apr 2006 Location: Brighton Posts: 1,015	Damn, Brad!! You know you should try this stuff for a living or something, you're pretty good at it. This rates up there with the silver F150 prerunner you built awhile ago...I see alot of similarities. Very inspirational

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/axial-scx-10/157616-updates-my-scx10.html
Posted By	For	Type	Date
Bender’s Custom SCX10 Prerunner Build	This thread	Refback	10-04-2011 04:24 PM

02-11-2009, 06:20 PM	#123
waterweezel Quarry Creeper Join Date: Dec 2008 Location: Ask Your Mom Posts: 441	All I can say is WOW! Brad that is one sweet build you have going on..Inspiring as always

02-13-2009, 09:26 AM	#124
ZUKMAN Quarry Creeper Join Date: May 2005 Location: SPANISH FORK Posts: 346	This build deserves to stay on the front page..... So I'm bumping this bitch back there.

02-13-2009, 09:40 AM	#125
punkuup5150 Rock Crawler Join Date: Mar 2008 Location: lodi Posts: 952	bender i put a 27t motor in my rig and on carpet it wheelies no prob. wheelies much better without the body on since the frame rail cap slides really well on the carpet and keep the rig pointed straight. looking good as allways cant wait to see what else you make me want to add to my rig.

02-15-2009, 09:56 PM	#128
stublet Quarry Creeper Join Date: Nov 2007 Location: Lakewood-Crawlerado Posts: 219	looks like you're trying to get a puma sponsorship with those silver stripes the way they are just givin you a hard time, that rig looks awesome, keep up the good work

02-16-2009, 07:41 AM	#129
ajcloud Quarry Creeper Join Date: Nov 2008 Location: Roswell Posts: 201	do i need to be ashamed that i already got the same body and intend to copy your work? dont worry, though, everyone who knows me will know these weren't my ideas at all. wicked work man, love your stuff. i put a mamba max with the 4600kv and it is so fun, and it crawls also. just gotta work the throttle and get it all set up right on the esc.

02-16-2009, 05:16 PM	#130
ajcloud Quarry Creeper Join Date: Nov 2008 Location: Roswell Posts: 201	well we had mine out today, with the 2 cell 5400 lipo and the 4600 it ran for over an hour, and it was a total blast. thanks for the inspiration. when i get the pics emailed i will post one up.

02-16-2009, 05:25 PM	#131
Crawler Noob Quarry Creeper Join Date: Jan 2006 Location: Atlanta GA Posts: 387	balling build is all i can say.

02-17-2009, 10:57 AM	#133
JAM MaxAmps.com RCC Addict Join Date: Nov 2007 Location: Nine Mile Falls, WA Posts: 1,229	You now know your required to take that to the scale nats this year. Jason

02-17-2009, 05:06 PM	#134
Grizzly4x4 PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler Posts: 13,137	I'm envisioning a whole new segment for the SCX-10........a scale prerunner racing class.

02-17-2009, 05:11 PM	#136
AeroSynch Rock Crawler Join Date: Oct 2007 Location: Miami Posts: 652	Where is the bumper from? How wide is it? Thank you.

Sponsored Links

02-18-2009, 02:42 PM	#138
Xtant3150c RCC Addict Join Date: Apr 2006 Location: On Da' Shelf Posts: 1,253	This thing just keeps getting better The Hellfire Bumper is a great match to the Diablo body

02-18-2009, 06:33 PM	#140
Matt.k Quarry Creeper Join Date: Sep 2006 Location: Orange, CA Posts: 365	Now you need to cut out the windows, build an interior with roll cage and have some real window netting!

RCCrawler Forums

Thread: Updates on my SCX10.........