12-29-2012, 07:14 PM | #1 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Southern SXC10 Build *Update*
Parts List Electronics: Holmes Hobbies BR-XL Holmes Hobbies 540 Trail Master Pro Ace CS170 Ultra Torque Ti Gear Servo Stock Receiver Stock Radio Chassis and Suspension: Vanquish Products Front Shock Hoops Vanquish Products Rear Shock Hoops RC4WD King 110mm Shocks RC4WD Bulldog Winch R2J Stainless Steel Links with Traxxas Rod Ends RC4WD Mojave Body Font Axle: Vanquish Products Currie Rockjock Housing Vanquish Products Truss/Upper Link Mount Vanquish Products Lower Link Mounts Vanquish Products Servo Mount Vanquish Products 0 Degree High Steer Knuckles Vanquish Products C-Hubs Vanquish Products Titanium Tie Rod/Drag Link Vanquish Products Bearing Mounts Stock Universals Stock Locker Stock Gearing Rear Axle: Vanquish Products Currie Rockjock Housing Vanquish Products Truss/Upper Link Mount Vanquish Products Lower Link Mounts Vanquish Products Bearing Mounts Stock Axle Shafts Stock Locker Stock Gearing Drivetrain: Stock Transmission Housing Stock Transmission Gearing Stock Spur Robinson Racing 15 Tooth Pinion RC4WD 130-150mm Punisher Shaft II Wheel and Tires: Vanquish Products OMF 2.2 Scale Rockcrawler Buggy Beadlock Wheels x4 Vanquish Products SLW Hubs .850 x4 LockedUp RC Inspired 2.2 Rings x4 Proline 2.2 TSL Swampers X4 Last edited by GravelDuster; 01-30-2013 at 08:40 PM. |
Sponsored Links | |
12-29-2012, 07:49 PM | #2 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: New SCX10 with Currie Axles
Here is a few at full flex, not to shabby.
|
12-29-2012, 07:52 PM | #3 |
RCC Addict Join Date: Nov 2011 Location: cold state
Posts: 1,334
|
Looks good, great articulation!
|
12-29-2012, 08:45 PM | #4 |
RCC Addict Join Date: Sep 2007 Location: Western ND, Bakken central
Posts: 1,653
| Re: New SCX10 with Currie Axles
Holy applesauce those axles sexy
|
12-30-2012, 09:51 AM | #5 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: New SCX10 with Currie Axles
They are VP is amazing. Going to pick up some solid brass tubing and start work on the truggy portion. Going to use a buddies Mojave cab for the mock up. I have never done any tube work before, any tips?
|
12-30-2012, 09:59 AM | #6 |
Rock Crawler Join Date: Sep 2011 Location: truckee
Posts: 918
| Re: New SCX10 with Currie Axles
looks awesome man. have you thought about doing the xr mod to make it wider instead of the wheel widener? i think that may be the route i go.
|
12-30-2012, 10:10 AM | #7 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: New SCX10 with Currie Axles
You know I just saw that after I bought everything lol. It was also running Wratih c-hubs and knuckles, it looked sweet. It seems pretty sturdy so far, I took it out this morning and put a pack through it. Everything is still tight and holding strong. I have a Novak 13.5 brushless I may drop in it today. Lots of mixed reviews about it, but Ive never had an issue with mine. And its just laying there with no home.
|
12-30-2012, 10:13 AM | #8 | |
Rock Crawler Join Date: Sep 2011 Location: truckee
Posts: 918
| Re: New SCX10 with Currie Axles Quote:
looks sick either way. | |
12-30-2012, 03:06 PM | #9 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: New SCX10 with Currie Axles
REALLY?!?! F*CK YOU NOVAK!!! I just got done saying never had an issue with the spare 13.5 system I had laying around. Got it installed ran it around the house for a sec, all seemed well. Took it outside for 5 minutes, ESC fried.........Just ordered a HH Trailmaster combo.
|
12-30-2012, 05:33 PM | #10 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: New SCX10 with Currie Axles
Since I had to tear out all the electronics again I decided to clean up the wiring a bit, I am a freak when it come to wires. I got a few extra holes cut in the receive box, shortened all of the leads, re soldered everything. Got all of the wiring inside the receiver box, looks nice and clean. Now I have a wiring plan when my BRXL combo get here.
|
01-05-2013, 09:01 PM | #11 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: Southern SXC10 Build
Got my Holmes Hobbies TorqueMaster ESC/Motor today after my Novak burned. Ripped everything out....again. Cut down and soldered all of the leads and managed to get all of the wiring inside the stock box. It has been raining all day here so I didn't get to take it outside so I had to settle for the living room. This thing is smoooooth. I am running it with a 3S 5000mah Lipo. This is my first HH setup, now I see how awesome they are.
|
01-05-2013, 09:26 PM | #12 |
Quarry Creeper Join Date: Dec 2012 Location: Eastern Tennessee
Posts: 277
| Re: Southern SXC10 Build |
01-05-2013, 09:51 PM | #13 |
Newbie Join Date: Apr 2012 Location: Alma,mi
Posts: 37
| Re: Southern SXC10 Build
awesome job on the clean wiring.
|
01-07-2013, 12:58 PM | #14 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: Southern SXC10 Build
Thanks man, I am a total weirdo when it come to wiring, I get very OCD. Just ordered the meat and potatoes for my build, this will be my first hard body, and suggestions for painting? |
01-07-2013, 08:56 PM | #15 |
Rock Crawler Join Date: Feb 2011 Location: s. terra firma
Posts: 519
| Re: Southern SXC10 Build
How are you going to mount it . Please show pictures. Thanks
|
01-08-2013, 10:06 AM | #16 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: Southern SXC10 Build
I dont know yet, I'm going to have to see how everything lines up. But i will snap some pics of how I mount it. |
01-08-2013, 04:21 PM | #17 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: Southern SXC10 Build |
01-09-2013, 06:24 AM | #18 |
Quarry Creeper Join Date: Mar 2009 Location: Independence,KY
Posts: 297
| Re: Southern SXC10 Build
Looks awesome so far
|
01-09-2013, 06:33 AM | #19 |
Pebble Pounder Join Date: Aug 2012 Location: Finland
Posts: 116
| Re: Southern SXC10 Build |
01-09-2013, 02:04 PM | #20 |
Quarry Creeper Join Date: May 2012 Location: Houston
Posts: 255
| Re: Southern SXC10 Build
Yeah I was looking at that, I found some paint for outdoor furniture that is textured. They had it in black and I think if I sprayed the body black with that textured paint it would look like the body was rhino lined, which I am a fan of. Body should be here Friday, I cant wait.
|
Southern SXC10 Build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vanquish SCX10 Currie Axles IN Stock | RPP Hobby | RPP Hobby | 2 | 03-26-2015 07:54 PM |
VP Currie Rear Axle Assembly | PrjktRedRubi | Axial SCX-10 | 7 | 12-27-2012 06:20 PM |
New Vaquish Axles - Thank you Currie | bigstu | General Scale Talk | 60 | 12-11-2012 06:04 AM |
crawlin with currie | peyton. | Axial AX-10 Scorpion | 14 | 07-05-2009 11:31 AM |
| |