RCCrawler Forums

Jeepkid · 02-07-2011, 08:41 PM

Thanks Fred, it just a taskforce tool case that had the awsome removable foam. I saw it the other day and was like, hellyeah. I knew it would be perfect for my daughter and I's radios. 20bucks isent too bad either.

Jeepkid · 02-09-2011, 10:53 AM

Update:
Got the big bores tuned, limited, and caps modded( thanks murderface).
Got the 4pl setup and good to go. Now I have a longer servo horn, throws faster and dosent seem to work as hard.
Got the final version of my custom one piece tierod. Very happy with the rig at this point. I will update with photos and videos of crawling action. Got my scx10 coming in a day or two, so going to be doing a build on that beast too.

Big bores look sweet. No more oil pissing out when on its side.

The one piece tierod. Look at the steering

4pl, VP10, and one 25gallon tote.

murderface · 02-09-2011, 10:58 AM

your tote is too big i guess if you end up homeless from spending all your money on rc you could always live in it lol

Jeepkid · 02-09-2011, 11:03 AM

The tote is perfect. I can fit the XR, scx, micro, lipos, tools, spare parts, and the cases with the controlers in it. It should be a bitch to carry, but atleast it rolls. It wont fit me I tried.

My 6foot 2inch ass cant bend enough.

murderface · 02-09-2011, 11:13 AM

Quote:

Originally Posted by Jeepkid

It wont fit me I tried.

My 6foot 2inch ass cant bend enough.

plus where would you keep your rigs lol

Jeepkid · 02-09-2011, 11:16 AM

Yes, I got to keep a roof over their heads and a good supply of 110 power for my lipo charger.

murderface · 02-09-2011, 09:33 PM

when are we crawlin again?? i should be all wired up and ready next week sometime

Jeepkid · 02-09-2011, 09:46 PM

I'll be crawling this weekend, but it isent going to be the XR. If I get the truck friday I'm going to Daves that night and running the crap out of it. In the snow

Got alot of stuff to do to the scale, before I run it there. I'll be in crunch mode as soon as it shows. The XR is ready for whatever, whenever. Its just ready. I also got a bunch of new lipos today.

Jeepkid · 02-23-2011, 08:38 AM

Little update action. Ordered a UGC Viper, could come today. Cant wait, also trying to get the wieght bias right after tuning it. I said fu(k it, the new chassis will be here soon. No need the dial the old chassis when its coming off.

murderface · 02-23-2011, 03:00 PM

am i the only one in the crew not getting that lol

Jeepkid · 02-23-2011, 03:13 PM

You got to be different. I was looking at the Viper when DT started testing it. Shane copied me. HAHA

Jeepkid · 02-24-2011, 04:58 PM

Still waiting on Viper chassis

I hope it comes tomorrow, so I can have it ready for saterday. If not no biggy, but one of the other guys will have his all setup and that would just suck.

darkmanx · 02-24-2011, 05:08 PM

Just got mine man it is amazing now I need big bores with Crazy Origins caps the stock shocks will work but I think there a little long for it.

Farmer · 02-24-2011, 06:19 PM

Quote:

Originally Posted by murderface

am i the only one in the crew not getting that lol

Don't worry, run what the cool kids run YTC BJ V4

You know you will love it, plus with you guys liking light rigs the CF version would definetly fullfill your needs

Later,
Farmer

Jeepkid · 02-24-2011, 06:20 PM

Stock shocks piss oil way too easy. Big bores are bomb.

fred0000 · 02-24-2011, 06:29 PM

I know this is not at all related to the thread but,....

whenever you say "bomb" it reminds me of this song, I like it so its all good, also the video is

....

*disclamer* video is NSFW */disclamer*

http://www.youtube.com/watch?v=XYKs6Njthdk

Jeepkid · 02-24-2011, 06:33 PM

HAHA, BOMB!!!!!!!!!!!!!!

BLKXJ 96 · 02-24-2011, 07:27 PM

Looks good man, I like that body!! As soon as snowmobile season is done, and all my GR buddies get their Losi sh*t running. We need to hit up battlefront with a big group, and tear it up.

Jeepkid · 02-24-2011, 07:33 PM

Yes

I am going on saterday to setup some gates and practice. I hope the UGC chassis is here tomorrow, or it will be a bummer practicing with my soon to be old setup. Want the snow to melt so bad. I got some local rock Murderface and I know of that will blow your guys minds.

BLKXJ 96 · 02-24-2011, 07:48 PM

Quote:

Originally Posted by Jeepkid

Yes

that will blow your guys minds.

I see Farmer is on this Thread too......im not sure you can do that

.....

02-24-2011, 06:29 PM	#76
fred0000 cherry bomb Join Date: Jul 2006 Location: Nanaimo, BC, Canada Posts: 1,598	I know this is not at all related to the thread but,.... whenever you say "bomb" it reminds me of this song, I like it so its all good, also the video is .... disclamer video is NSFW /disclamer http://www.youtube.com/watch?v=XYKs6Njthdk Last edited by fred0000; 02-24-2011 at 06:43 PM.

02-07-2011, 08:41 PM	#61
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Thanks Fred, it just a taskforce tool case that had the awsome removable foam. I saw it the other day and was like, hellyeah. I knew it would be perfect for my daughter and I's radios. 20bucks isent too bad either.

02-09-2011, 10:53 AM	#62
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Update: Got the big bores tuned, limited, and caps modded( thanks murderface). Got the 4pl setup and good to go. Now I have a longer servo horn, throws faster and dosent seem to work as hard. Got the final version of my custom one piece tierod. Very happy with the rig at this point. I will update with photos and videos of crawling action. Got my scx10 coming in a day or two, so going to be doing a build on that beast too. Big bores look sweet. No more oil pissing out when on its side. The one piece tierod. Look at the steering 4pl, VP10, and one 25gallon tote.

02-09-2011, 10:58 AM	#63
murderface Rock Crawler Join Date: Mar 2008 Location: Grand Rapids Posts: 918	your tote is too big i guess if you end up homeless from spending all your money on rc you could always live in it lol

02-09-2011, 11:03 AM	#64
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	The tote is perfect. I can fit the XR, scx, micro, lipos, tools, spare parts, and the cases with the controlers in it. It should be a bitch to carry, but atleast it rolls. It wont fit me I tried. My 6foot 2inch ass cant bend enough.

02-09-2011, 11:16 AM	#66
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Yes, I got to keep a roof over their heads and a good supply of 110 power for my lipo charger.

02-09-2011, 09:33 PM	#67
murderface Rock Crawler Join Date: Mar 2008 Location: Grand Rapids Posts: 918	when are we crawlin again?? i should be all wired up and ready next week sometime

02-09-2011, 09:46 PM	#68
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	I'll be crawling this weekend, but it isent going to be the XR. If I get the truck friday I'm going to Daves that night and running the crap out of it. In the snow Got alot of stuff to do to the scale, before I run it there. I'll be in crunch mode as soon as it shows. The XR is ready for whatever, whenever. Its just ready. I also got a bunch of new lipos today.

02-23-2011, 08:38 AM	#69
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Little update action. Ordered a UGC Viper, could come today. Cant wait, also trying to get the wieght bias right after tuning it. I said fu(k it, the new chassis will be here soon. No need the dial the old chassis when its coming off.

02-23-2011, 03:00 PM	#70
murderface Rock Crawler Join Date: Mar 2008 Location: Grand Rapids Posts: 918	am i the only one in the crew not getting that lol

02-23-2011, 03:13 PM	#71
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	You got to be different. I was looking at the Viper when DT started testing it. Shane copied me. HAHA

Sponsored Links

02-24-2011, 04:58 PM	#72
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Still waiting on Viper chassis I hope it comes tomorrow, so I can have it ready for saterday. If not no biggy, but one of the other guys will have his all setup and that would just suck.

02-24-2011, 05:08 PM	#73
darkmanx Rock Crawler Join Date: Oct 2009 Location: 6512 Elevation Posts: 884	Just got mine man it is amazing now I need big bores with Crazy Origins caps the stock shocks will work but I think there a little long for it.

02-24-2011, 06:20 PM	#75
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Stock shocks piss oil way too easy. Big bores are bomb.

02-24-2011, 06:33 PM	#77
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	HAHA, BOMB!!!!!!!!!!!!!!

02-24-2011, 07:27 PM	#78
BLKXJ 96 Rock Crawler Join Date: Oct 2009 Location: Michigan Posts: 895	Looks good man, I like that body!! As soon as snowmobile season is done, and all my GR buddies get their Losi sh*t running. We need to hit up battlefront with a big group, and tear it up.

02-24-2011, 07:33 PM	#79
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	Yes I am going on saterday to setup some gates and practice. I hope the UGC chassis is here tomorrow, or it will be a bummer practicing with my soon to be old setup. Want the snow to melt so bad. I got some local rock Murderface and I know of that will blow your guys minds.

RCCrawler Forums

Thread: Jeepkids UGC ViPer10