Super 300's/300HDs taking orders

[SDS Customz]

For all of you that have been waiting for me to get parts back in stock, the wait is almost over. The following price list is for everthing that im supposed to have ready to ship in 2-3 weeks. The machinist is already cutting parts and is awaiting any order adjustments that I feel nessacary. Most people are fully aware of the strength and durability of my products, The new Hd shafts will only further support that reputation. With the added bonus of 70+degrees of steering and the ability to replace simple bushings as the wear item rather than hardened metal on hardened metal.

Im taking pre-orders on everything listed below, so feel free to pm me with your orders. I will try and keep up with questions pms alike though you may have to be a little patient. I will post up some pics and video of the HD product. The HD product line is designed to work with Vanquish Product knuckles and C's. crawler wheels and accesories, beadlock wheels



Original 300's(cvd max 50* steering) This Product line is no longer feasible to continue due to Vanquishes shafts cutting into This market heavily. The Hds will now be my focus. I will have a few pieces available for repairs ect as the machinist cleans up some old stock

300M Third Gears 35.00

300M Second Gears 35.00





Super 300 HD's(Universal style 70+degrees of steering fully rebuildable one piece cross w/bushings, requires the use of wraith knuckles(ONLY TESTED WITH VP)

Berg 185.00

XR-10 185.00

Axial(7075 Aluminum Locker included) 205.00

Wraith(7075 Aluminum Locker included) 215.00

Super Berg 215.00

Builders Set(6.5" Blank Inner Shaft) 225.00

Axial 8*chub to Wraith Knuckle Adapters 12.00(per knuckle)

HD Full rebuild(1-cross,4-bushings w/clips) 35.00

Half rebuild(1-cross or 4-bushings w/clips) 20.00



Please post all questions or comments in this thread so all of the info stays in one spot:Super 300/300HD's

[Harley]

Nice work John! You may want to specify that they require VP Wraith knuckles, since most other brands are the same as a normal XR knuckle.

[ittybitty]

Looking forward to getting my grubby little hands on a set of the new shafts

[TSK]

The VP Wraith knuckle and XR knuckle seem pretty similar besides the double shear arm. What makes it haveto be VP Wraith knuckle specific?

[Harley]

Originally Posted by TheSCorpionKing

The VP Wraith knuckle and XR knuckle seem pretty similar besides the double shear arm. What makes it haveto be VP Wraith knuckle specific?

I talked with John this afternoon, XR will work too but you'd have to cut the arms off to get the throw out of the XR's.

[sococrawler]

Damnit if I didn't have all my $ tied up in the payout for pcc I'd have ya bring me a set of hd's for my wraith
Good job John on kickin that machinist in the oh my!

[SDS Customz]

Ill answer questions in the general thread listed above that way it keeps all of the info in one spot and hopefully ill only have to answer the same question 4 or 5 times!!!

[TedBull]

PP sent for:

* 300HD XR10 shafts.

* HD full rebuild kit.

[racer_zh]

Pay pal Sent for a couple of sets

my poor Paypal account

[teague]

PP Sent for 2 sets of the ax10 Super 300 HD and 4 pairs of the hats. You rock sir!

[ollie]

pp sent for super 300HD for xr-10.

[sally1800]

any pic's of the XR steering?

[SDS Customz]

Originally Posted by saydee1800

any pic's of the XR steering?

Maybe Krawlfreak will post up some pics of his XR with mad steering. My kids are still putting theirs together

[Arct1k]

Do I need to PP for a short berg/berg side? Thx

[BigSki]

Does SDS have a webpage? A google search only turned up crawler innovations.

[SDS Customz]

Originally Posted by Arct1k

Do I need to PP for a short berg/berg side? Thx

Yes sir

Originally Posted by BigSki

Does SDS have a webpage? A google search only turned up crawler innovations.

No web page, if you have questions pm me or post them. There is a bunch of pics in the general crawler thread that is titled the same as this one

[BigSki]

Thanks for the reply. I saw a 'builders kit' mentioned a few times, I was curious about it. Those u-joints and yokes that you make would be the start of a nice scale driveshaft.

[SDS Customz]

Originally Posted by BigSki

Thanks for the reply. I saw a 'builders kit' mentioned a few times, I was curious about it. Those u-joints and yokes that you make would be the start of a nice scale driveshaft.

Not to worry there should be a better product for that very soon.

[SDS Customz]

Another product that is adding itself to the list is berg 300M 2nd gears. they will be the same price as the thirds

[dexcrawler]

PP sent for berg HD..
Thanks
Song