Super 300/300HD's

[SDS Customz]

For all of you that have been waiting for me to get parts back in stock, the wait is almost over. The following price list is for everthing that im supposed to have ready to ship in 2-3 weeks. The machinist is already cutting parts and is awaiting any order adjustments that I feel nessacary. Most people are fully aware of the strength and durability of my products, The new Hd shafts will only further support that reputation. With the added bonus of 70+degrees of steering and the ability to replace simple bushings as the wear item rather than hardened metal on hardened metal.

Im taking pre-orders on everything listed below, so feel free to pm me with your orders. I will try and keep up with questions pms alike though you may have to be a little patient. I will post up some pics and video of the HD product. The HD product line is designed to work with Vanquish Product knuckles and C's. crawler wheels and accesories, beadlock wheels


All of this will be available in 2-3 weeks ready to ship let me know what you would like
Original 300's(cvd max 50* steering)

Berg/Berg

Berg/Axial

Axial

Supers

Rebuilds

300M Third Gears

300M Second Gears

HD Pins




Super 300 HD's(Universal style 70+degrees of steering fully rebuildable one piece cross w/bushings, requires the use of wraith knuckles)

Berg

XR-10

Axial(7075 Aluminum Locker included)

Wraith(7075 Aluminum Locker included)

Super Berg

Builders Set(6.5" Blank Inner Shaft)

Axial 8* "C" to Wraith Knuckle Adapters

HD Full rebuild(1-cross,4-bushings w/clips)

Half rebuild(1-cross or 4-bushings w/clips)


All pricing is listed here:Super 300's/300HDs taking orders



Please post all questions or comments in this thread so all of the info stays in one spot



Ok, lets try this, this may help the confusion

XR10/wraith Chub + Wraith Knuckle = Works and is the ideal setup for max steering

XR10/wraith Chub + XR Knuckle = Works but xr knuckle may limit steering angle.

VP AX10 8* Chub + XR or Wraith knuckle = No worky

VP AX10 8* Chub + XR or Wraith knuckle + SDS customs flange bushing adapters = Works

AND FOR NON INCLINED KINGPIN SETUP:

Normal AX10 Chub + Felsenfest V5XR knuckle = Should work

[Docwolf]

Any interest in doing shafts for the RS10XT?

[SDS Customz]

[53 willys]

how much are HD rebuild kits?

so if you ran HD versions on a Berg axle what parts are needed? (wraith knuckles and chubs?)
any pics of this stuff on a berg axle?

[C*H*U*D]

My Scaler is going to be so happy

[SDS Customz]

Originally Posted by 53 willys

how much are HD rebuild kits? I new that i missed something

full rebuild 1-cross,4-bushings,4-c-clips=35.00

I will also sell them as individuals(ie. 1-cross, or 4-bushings w/clips) for 20.00


so if you ran HD versions on a Berg axle what parts are needed? (wraith knuckles and chubs?) You would need wraith or axial 8* c's(with axial 8*c's you would need to purchase my adapters) and wraith knuckles
any pics of this stuff on a berg axle?

Not yet

[marlboroman]

Sure glad your back with these and looking forward to the HD for my berg

[fritzthefly]

what´s include or any pic of the Hd Builders Set (6.5" Blank Inner Shaft).

how long are the Super Berg HD´s. like the normal 300`s or longer.

[marlboroman]

Also John does the bearing change if going from normal 300's to the HD 300's

[dude26]

WOOWWWW

awesome !!!

this is what it missing to my XR

I have Vp knuckles, so do I need Wraith knuckles ? or just a adapter ??

sorry but it's not very clear for me

[TedBull]

Originally Posted by dude26

WOOWWWW

awesome !!!

this is what it missing to my XR

I have Vp knuckles, so do I need Wraith knuckles ? or just a adapter ??

sorry but it's not very clear for me

Wondering the same.

[ittybitty]

The Wraith knuckles and the XR knuckles are the same as far as measurements go. You'll be fine running either of them with the 300HD's. The only knuckles that don't work out are the AX10 8* and the standard AX10 or Berg style knuckles. The measurement from inner bearing on the knuckle to the outer bearing on the tube is longer on the Wraith/XR versions in order to accommodate the universal style shafts

[TSK]

What does the adpater look like?

[rcscaler]

glad to see all the info again

those price include shipping fee??
and do u include locker for Original 300's(for axial axle)??
also, could u post up some pics?? that will helps a lot!!

[mfawv]

what ones in HD will i need for RCBros knuckles?

[meatmonkey]

Wow, those are like miniature CTM joints. So droolworthy yet so out of my budget.

The only thing their missing is a mini grease zerk.

[mammoth]

Any idea of the weight of the XR ones?

[Waiting Dragon]

Is been specified to use VP Wraith knuckles.

Originally Posted by mfawv

what ones in HD will i need for RCBros knuckles?

[Waiting Dragon]

Hey John!

Could you please post up a picture of the 8* to Wraith knuckles adapter?

Thanks, Juan.

[pastrana#199]

How much do the xr10 300hd weight?