Sacramento Scaler GTG/Comps

[minicrawlerguy530]

If anyones down just post or pwm me. I know dirty and kbess are going. I hope to see a few other guys out there to nake it that much better.

[Jrob]

Originally Posted by minicrawlerguy530

Hey kbess and dirty, do you guys want to head out wednesday? Im down to go if you guys are and anyone else. The more the merrier guys.

You know I'm down

[finishline]

HE MAY BE ON TO SOMETHING!

check it out

Winch Torque... Is this too much?

[Jrob]

Originally Posted by minicrawlerguy530

Hey kbess and dirty, do you guys want to head out wednesday? Im down to go if you guys are and anyone else. The more the merrier guys.

Originally Posted by finishline

HE MAY BE ON TO SOMETHING!

check it out

Winch Torque... Is this too much?

I actually did this about a year ago. The problem is. Unreliability! I burnt up 6 motors and stripped internal tranny gears. You can make it work with a nice 1/18 motor probaly but when you start spending that money buy a quicksand winch what I have done that has proven awsome is I wired a esc like a rooster crawler etc... directly to the servo winch motor. Now I have done this a few ways including running front and rear winches with on off switches in line with the power. Making it possible to run both at the same time or individually. Also. You can wire the esc to one battery or run a separate pack for both it's up to you? It's defiantly a cool concept. I thought I was gonna be the man with that setup. But after many hours of test and tune it proved unreliability compared to a standard servo winch with esc powering it.

[nissan_driver24]

Originally Posted by dirty530crawlers

I actually did this about a year ago. The problem is. Unreliability! I burnt up 6 motors and stripped internal tranny gears. You can make it work with a nice 1/18 motor probaly but when you start spending that money buy a quicksand winch what I have done that has proven awsome is I wired a esc like a rooster crawler etc... directly to the servo winch motor. Now I have done this a few ways including running front and rear winches with on off switches in line with the power. Making it possible to run both at the same time or individually. Also. You can wire the esc to one battery or run a separate pack for both it's up to you? It's defiantly a cool concept. I thought I was gonna be the man with that setup. But after many hours of test and tune it proved unreliability compared to a standard servo winch with esc powering it.

before my Quicksand winches I used a servo gutted and ran a FXR or B1R from tekin as a variable speed winch controller and allowed me to run 3s on the motors... I still do that with my QS winches works awesome never had a problem with that setup..

[finishline]

Originally Posted by dirty530crawlers

I actually did this about a year ago. The problem is. Unreliability! I burnt up 6 motors and stripped internal tranny gears. You can make it work with a nice 1/18 motor probaly but when you start spending that money buy a quicksand winch what I have done that has proven awsome is I wired a esc like a rooster crawler etc... directly to the servo winch motor. Now I have done this a few ways including running front and rear winches with on off switches in line with the power. Making it possible to run both at the same time or individually. Also. You can wire the esc to one battery or run a separate pack for both it's up to you? It's defiantly a cool concept. I thought I was gonna be the man with that setup. But after many hours of test and tune it proved unreliability compared to a standard servo winch with esc powering it.

Thanks for the info

[Jrob]

Originally Posted by finishline

Thanks for the info

No problem

[Jrob]

A few of us our meeting at deer creek tomorrow, we will be there around 11am. See ya on the Rocks

[KBess1110]

Originally Posted by dirty530crawlers

A few of us our meeting at deer creek tomorrow, we will be there around 11am. See ya on the Rocks

Woopwoop can't wait for tomorrow. Lilian guna be there? Miss dott will be

Sent from my VZW Rezound using Tapatalk

[Jrob]

Nope he went his moms for a couple days. Savage is gonna run his rig,
I'm gonna have my daughter though.

[Savage03]

Well with a fried bec its being rigged as we speak ugh...only been up since 7 im ready for bed lol

[Jrob]

Originally Posted by Savage03

Well with a fried bec its being rigged as we speak ugh...only been up since 7 im ready for bed lol

Nice! Get Er Dun!!!! Savage! I will have the Cherokee if you wanna give it a spin also

[jscalecrawler]

Originally Posted by finishline

HE MAY BE ON TO SOMETHING!

check it out

Winch Torque... Is this too much?

use a mg995 servo with a heyok winch controller, it lifts my rig off the ground and its faster thn the hitec 645

[Jrob]

Had a great time with everyone today! What a turn out for a Wednesday what 8 drivers And had an awsome time. See ya on the Rocks!!

[finishline]

Originally Posted by jscalecrawler

use a mg995 servo with a heyok winch controller, it lifts my rig off the ground and its faster thn the hitec 645

No I don't think those servos will handle the beating I would give them

[KBess1110]

Originally Posted by dirty530crawlers

Had a great time with everyone today! What a turn out for a Wednesday what 8 drivers And had an awsome time. See ya on the Rocks!!

Grrrr we all broke down :-(

Sent from my VZW Rezound using Tapatalk

[Savage03]

Naw just you I think lol Your first time with the magic smoke :(

[Savage03]

[minicrawlerguy530]

Yeah today was a blast, it was great. I had the most problems, but kbess' poor rig let its smoke out of the box. RIP.....for now lol. We should try and set up an intercounty comp or g2g. Im down. I know dirty's wants to come up and ill still come down.

[KBess1110]

Originally Posted by Savage03

Naw just you I think lol Your first time with the magic smoke :(

Tyler and Alex did also butntjey were able to recover

Sent from my VZW Rezound using Tapatalk