RCCrawler Forums

BENDER · 11-21-2005, 11:16 PM

Quote:

Originally Posted by Madcratebuilder

You have been pay-paled.

Thanks for the order Madcratebuilder. 8-)

NEMYSIS · 11-22-2005, 01:06 PM

I just paypaled you, can't wait for the new chassis.

JakeTheAlligatorMan · 11-22-2005, 07:37 PM

Hey Bender........ Have you given Numbering the chassis's any thought? Can I have #1?

JakeTheAlligatorMan · 11-22-2005, 07:40 PM

Oh yeah........... I won't have any $$$'s till mid-next-week so........... if you could just set that one aside for me I'd be forever gratefull

BENDER · 11-22-2005, 07:47 PM

Quote:

Originally Posted by NEMYSIS

I just paypaled you, can't wait for the new chassis.

Thanks NEMYSIS.

Quote:

Originally Posted by JakeTheAlligatorMan

Oh yeah........... I won't have any $$$'s till mid-next-week so........... if you could just set that one aside for me I'd be forever gratefull

I did think about numbering them, but I didn't want the chassis to get too cluttered with engraving. I messed around with engraving the SW2 logo in them, but I didn't like the way it looked.

I can set one aside for you until next week, thanks.

95MoYj · 11-23-2005, 01:11 PM

Just sent you the money through PayPal. I was also wondering what shipping times look like.

BENDER · 11-23-2005, 01:16 PM

Quote:

Originally Posted by 95MoYj

Just sent you the money through PayPal. I was also wondering what shipping times look like.

Thanks for the order.

It's looking like next week on shipping because of the holidays.

crawlak · 11-25-2005, 02:29 AM

I just pay-palled. How many do you have left? Thanks for putting all the hard work into making an awesome looking/performing chasis.

BENDER · 11-25-2005, 08:35 AM

Quote:

Originally Posted by crawlak

I just pay-palled. How many do you have left? Thanks for putting all the hard work into making an awesome looking/performing chasis.

Thanks for the order crawlak, I've still got a handfull of them left for this round.

copeland118 · 11-25-2005, 05:40 PM

on the trany
is it the eletric R nitro ?

BENDER · 11-25-2005, 10:38 PM

The tranny is electric, the electric Stampede, Rustler and Bandit all share the same tranny. The only difference is the spur gear size.

NEMYSIS · 11-26-2005, 12:49 PM

Hey Bender will you be shipping these out of Monday, I am anxiouse to get mine before we get to much snow and it covers all the rocks. Thanks

copeland118 · 11-26-2005, 03:24 PM

so the traxxas 105 mm turnbuckles will make it 12.5in??

and how much for S/H??

dose it come with a set up sheet ???

BENDER · 11-26-2005, 06:41 PM

Quote:

Originally Posted by NEMYSIS

Hey Bender will you be shipping these out of Monday, I am anxiouse to get mine before we get to much snow and it covers all the rocks. Thanks

I will start shipping the chassis' on Monday, I will go down the list in the order of purchase date. I will be at the post office everyday this week.

Thanks.

Quote:

Originally Posted by copeland118

so the traxxas 105 mm turnbuckles will make it 12.5in??

and how much for S/H??

dose it come with a set up sheet ???

Yes, the 105mm Maxx tierods/turnbuckles will yeild a 12 1/2" wheelbase, with the stock lower control arms as uppers and my link mounts.

S/H is included in the price for orders in the U.S., for orders outside the U.S. PM me for a quote.

I'm working on some sort of set-up sheet, but it may not make it in with the first round of chassis'. I've done a build-up thread on this chassis, so people can set exactly how I set mine up.

Here's a link to the SW2 build-up.
Shaggin' Wagon.......Stage 2 Build-up

Thanks.

copeland118 · 11-27-2005, 03:11 PM

do u think the 87 R 93 spur would be to much?ARE is it that they are to big for the sw2 chassis

i have 55t lath motor and a 12p 48 pitch

BENDER · 11-27-2005, 05:47 PM

Quote:

Originally Posted by copeland118

do u think the 87 R 93 spur would be to much?ARE is it that they are to big for the sw2 chassis

i have 55t lath motoe and a 12p 48 pitch

It all depends which driveshafts you want to run. You can run up to an 87t spur gear and still fit the 2.5 Maxx driveshafts. I personally run a 12t pinion and an 84t spur with an Integy 55t lathe motor, it's got great torque and good wheelspeed. I'm not sure how big a spur gear you can fit on a Stampede tranny, with Stampede shafts.

Here's a few close-up pics of my set-up.

MongoDS · 11-28-2005, 08:41 PM

Is there any left ?

BENDER · 11-28-2005, 08:48 PM

I still have a few left from this round.

MongoDS · 11-28-2005, 09:11 PM

You have been paid............Pal

geez all I need now is everything else.

BENDER · 11-28-2005, 09:13 PM

Quote:

Originally Posted by MongoDS

You have been paid............Pal

geez all I need now is everything else.

Thanks for the order.

11-22-2005, 01:06 PM	#22
NEMYSIS Rock Stacker Join Date: Nov 2005 Location: School and work Posts: 92	You have a sale waiting I just paypaled you, can't wait for the new chassis.

11-26-2005, 12:49 PM	#32
NEMYSIS Rock Stacker Join Date: Nov 2005 Location: School and work Posts: 92	Shipping Hey Bender will you be shipping these out of Monday, I am anxiouse to get mine before we get to much snow and it covers all the rocks. Thanks

11-27-2005, 03:11 PM	#35
copeland118 Newbie Join Date: Nov 2005 Location: Omaha Posts: 12	do u think the 87 R 93 spur would be to much?ARE is it that they are to big for the sw2 chassis i have 55t lath motor and a 12p 48 pitch Last edited by copeland118; 11-27-2005 at 09:05 PM.

11-22-2005, 07:37 PM	#23
JakeTheAlligatorMan Rock Crawler Join Date: Jan 2005 Location: and OR. if . . . . Gone Fishin :p :b :p Posts: 501	Hey Bender........ Have you given Numbering the chassis's any thought? Can I have #1?

11-22-2005, 07:40 PM	#24
JakeTheAlligatorMan Rock Crawler Join Date: Jan 2005 Location: and OR. if . . . . Gone Fishin :p :b :p Posts: 501	Oh yeah........... I won't have any $$$'s till mid-next-week so........... if you could just set that one aside for me I'd be forever gratefull

11-23-2005, 01:11 PM	#26
95MoYj Pebble Pounder Join Date: May 2005 Location: Hacienda Heights Posts: 143	Just sent you the money through PayPal. I was also wondering what shipping times look like.

11-25-2005, 02:29 AM	#28
crawlak Newbie Join Date: Nov 2005 Location: Anchorage Posts: 31	I just pay-palled. How many do you have left? Thanks for putting all the hard work into making an awesome looking/performing chasis.

11-25-2005, 05:40 PM	#30
copeland118 Newbie Join Date: Nov 2005 Location: Omaha Posts: 12	on the trany is it the eletric R nitro ?

11-25-2005, 10:38 PM	#31
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	The tranny is electric, the electric Stampede, Rustler and Bandit all share the same tranny. The only difference is the spur gear size.

11-26-2005, 03:24 PM	#33
copeland118 Newbie Join Date: Nov 2005 Location: Omaha Posts: 12	so the traxxas 105 mm turnbuckles will make it 12.5in?? and how much for S/H?? dose it come with a set up sheet ???

11-28-2005, 08:41 PM	#37
MongoDS Newbie Join Date: Sep 2005 Location: NW New Mexico Posts: 49	Is there any left ?

11-28-2005, 08:48 PM	#38
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	I still have a few left from this round.

11-28-2005, 09:11 PM	#39
MongoDS Newbie Join Date: Sep 2005 Location: NW New Mexico Posts: 49	You have been paid............Pal geez all I need now is everything else.

Sponsored Links

RCCrawler Forums

Thread: BENDER Customs SW2 chassis.........