Re: Pics of your latest purchase |
Re: Pics of your latest purchase Got the megalodon body! Showed up on my porch this morning... https://youtu.be/Jio2M6QwSpc https://media.makeameme.org/created/18990dd903.jpg |
Re: Pics of your latest purchase Not sold with vehicle?? Front shocks and towers RC4WD Overland 4x4 Factory Parts from JDM? Fit perfect, all fasteners included, add loctite and stability! https://uploads.tapatalk-cdn.com/202...cfd11932b7.jpg Hang up and Drive |
Re: Pics of your latest purchase Had to make a stop to the store tonight for some shoe goo to repair a body. Came across the color of a hot wheels jeep gladiator I had to have lol.https://uploads.tapatalk-cdn.com/202...8bfc6191bb.jpg Sent from my SM-J727T using Tapatalk |
Re: Pics of your latest purchase Two different use cases, but... A Streamlight Protac HL-X setup https://i.imgur.com/iicggHH.png?1 And a Sionyx Aurora Black with pic rail mount https://i.imgur.com/bq0F7Td.png?1 |
Re: Pics of your latest purchase DJX metal bumper and a Power Hobby steering servo for the UMGhttps://uploads.tapatalk-cdn.com/202...b54fff1656.jpg Sent from my SM-G950U using Tapatalk |
Re: Pics of your latest purchase Reefs LP 299 Servo for Steering duty on both of my No Prep Buillds. Here I put one in my Chuckworks RC RedShift Drag build. Also adjusted the ESC and Cap Pack and was able to shift the Rx flat for better profiles and access. This servo is a little brute. About 2/3rds the height of a standard servo (TRX, Hitec, Futaba etc) and runs at 6v, 7.4v, and 8.4v. 299 in/oz torque at .06 seconds and 324 in/oz at .057 seconds. Smoking fast servos and still have Respectable Torque ratings. And seeing it can run at 8.4v, and is in a drag rig, it should last a lifetime and be very fast for those high speed corrections. Also picked up a couple Drag Race Concepts wheely bar bushings in red for the RedShift, and 2 sets of Dueces Wild Heavy Weight Foams for the Pro-Line Hoosiers for both builds. Still have to install those tomorrow. Other than Ti Bolts (maybe, still debating) and getting the body painted, shes pretty much a wrap. https://i.ibb.co/nCp5B7G/IMG-20201104-163944012.jpg https://i.ibb.co/KxdsKgm/IMG-2020110...-COVER-TOP.jpg https://i.ibb.co/723DRCr/IMG-2020110...-COVER-TOP.jpg https://i.ibb.co/NpYjywz/IMG-20201104-164033963.jpg https://i.ibb.co/3TjYkQT/IMG-20201104-230019033.jpg https://i.ibb.co/JtHRGkZ/IMG-20201104-230027959.jpg https://i.ibb.co/f4291fL/IMG-20201104-230107910.jpg |
Re: Pics of your latest purchase Some more parts intended for a future build likely to occur over the holidays. https://uploads.tapatalk-cdn.com/202...5b75768b71.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase 1 Attachment(s) OK, so I picked up the new up-sized RC4WD Mickey Thompson Baja Pro X tires and a couple other parts direct from their site - and check out what they stuck in the box - a "fandana" (stretchy neck gaiter) that has the Marlin, the 4Runner, and the C2X (which I bought for myself last year) repeated in the pattern! |
Re: Pics of your latest purchase 1 Attachment(s) Yesterday I picked up a 4-tec 2.0 for my birthday, always meant to get around to buying one - haven't had a touring car in many years. I had thought about maybe having an alternate gravel setup using the Boom Racing narrow steelies, Boom Racing Trophy Mud Terrain tires (93mm), and the Sumo body... I got it home and set the Sumo body on it - unfortunately this proved that it won't work as the front bodyposts are jammed into the grill area, so that's out of the question. Looks like the Sumo will need to get a dedicated SWB chassis down the road. Fun picture, though! |
Re: Pics of your latest purchase I little heat and a little bending on those posts and it’ll slip right down. |
Re: Pics of your latest purchase Quote:
Thanks, I might try that - first I'll need to assemble those wheels and tires and see if they foul the chassis at full steering lock - I'll also need these Firebrand RC "Tallboy" slip-over bodypost extenders: https://images.amain.com/images/larg...1acctal776.jpg |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase Quote:
Appreciate the link! "thumbsup" |
Re: Pics of your latest purchase Plus bought some wood to build a course in the back yardhttps://uploads.tapatalk-cdn.com/202...1435ee3e19.jpghttps://uploads.tapatalk-cdn.com/202...1edfc1e2a7.jpg |
Re: Pics of your latest purchase Quote:
I got the first plate printing and I will start a build thread on the progress. It is going to take a while to get it all printed. |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase While, technically, I ordered everything (except the side racks & cases) a few weeks ago, and while everything arrived 1-2 weeks ago, due to some "problems", I had to delay installing everything. What is "everything"? GIVI V47 top case, GIVI E135 LED Brake Light Kit for V47, LED Brake Light & Town Signal Kit for V35 side cases, GIVI SR2122 Top Case Rack, GIVI M7 Monkey Top Case Plate, GIVI E159 Top Case Luggage Rack for V47, and Thinkware M1 2-channel Motorsports Camera System (with front center-mounted just below the headlights, and rear center-mounted under the GIVI M7 Top Case Plate).https://uploads.tapatalk-cdn.com/202...3e3d15611a.jpghttps://uploads.tapatalk-cdn.com/202...f8283a99ee.jpghttps://uploads.tapatalk-cdn.com/202...6d0b0721f9.jpgNOW, she's FINALLY ready for what she was designed for: long-distance sport touring. ~ More peace, love, laughter, & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase Office Depot folder organizer to build a dry box for filament[emoji106] https://uploads.tapatalk-cdn.com/202...2201d24dd5.jpg Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase 3 Attachment(s) Got an exhuast (downpipe back) system and some eibach pro kit springs installed on the civic last night. Ride height went down about an inch, still a comfortable ride. Wasn’t so sure in the blue tips of the exhaust but they’ve grown on me quite a bit and I like them now. |
Re: Pics of your latest purchase Got the 110mm shocks for the rear ends of my No Preps. Installed 1 hole Traxxas Pistons with 60w oil and got them installed. Set of them in Green and Blue for the other 2 No Preps. https://i.ibb.co/sC49pYm/IMG-20201112-222410797.jpg https://i.ibb.co/gZb3KJh/IMG-20201112-222418326.jpg |
Re: Pics of your latest purchase Quote:
Car is looking great TB!"thumbsup" |
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase 2 Attachment(s) Thanks gents! I appreciate the kind words. A little more info on it... I also have an intake kit in there, this one the filter is still up high like a short ram but it’s in an enclosed box (top is lexan!) with an induction snorkel on the bottom. This helps a lot with the vegas heat. Also running a tune on it that ups the boost by 3 pounds (or 6 pounds in sport mode) and it’s just a blast to drive. The tune made it feel like a different car. The tuner comes with a handy screen that lets me monitor various data points from the ecu. |
Re: Pics of your latest purchase Quote:
Never been a fan of a Type-R, but this looks good! Every time I see a car with the flame like tips, I don’t like them, but they work on the Type-R[emoji106] Sent from my iPad using Tapatalk |
Re: Pics of your latest purchase Thank you, this one is just an SI though not a type R. My buddy has a type R, hoping to get together with him and another friend of mine that has an SI sometime soon for some pics. |
Pics of your latest purchase Da da duuum. Honda vs VW. I do like that SI though. All SIs (for that) matter. I remember when you bought it earlier this year. I was hoping it was a mid ‘90s egg one as the pic loaded. Just picked up my home brew manifold from the machine shop. I cut and fit it with a 4.5” hand grinder. Sounds like it should be bad but it came out...decent. He welded it out and decked both flanges. Not the most (or at all) efficient but will do for a daily beater. Goal is 30psi to 7000rpm. It’s a load of fun if you like retarded amounts of torque steer, having to dodge every pothole and speed bump, a little bit of rain may as well be ice, and/or blowing doors off of, but not limited to, pony cars. I literally just came inside from wire wheeling the BBs off of it from the welder. Gave it a quick test fit and called it quits. Got a HS football game to attend tonight. It’s game 2 of state playoffs. 11-0 thus far and lowest scoring was still in the 30s. Highest I saw this season was in the 50s. Lol. 99% sure they recruit. I was using the cast one but it has 2 studs I can’t get the nut torqued down on. Plus the turbo rubs the firewall insulation a little bit. Mine is 3/8” shorter. https://uploads.tapatalk-cdn.com/202...09f620c380.jpg https://uploads.tapatalk-cdn.com/202...9e7c60065c.jpg |
Re: Pics of your latest purchase |
Re: Pics of your latest purchase Basically done with stock piling now. Maybe one or two more items to go yet. Then it’s time to pull the trigger on the next kit. https://uploads.tapatalk-cdn.com/202...0277e8a09c.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Got a killer deal on a DMG stiffy kit, build thread once more parts show up :mrgreen: https://i.imgur.com/UGaMRaUl.jpg |
Re: Pics of your latest purchase 2014 Jeep Patriot. My step-daughter is buying my car, so I needed to replace it. https://i.imgur.com/0348g52.jpg |
Re: Pics of your latest purchase Got some of my parts delivered today for my build. Excited to get them. More parts coming soon.https://uploads.tapatalk-cdn.com/202...6b8eb7732f.jpghttps://uploads.tapatalk-cdn.com/202...e2f5f8bf86.jpg Sent from my SM-J727T using Tapatalk |
Re: Pics of your latest purchase https://uploads.tapatalk-cdn.com/202...cb2d1773d8.jpg Got this on the way, let’s see if anyone knows what this is Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Quote:
~ More peace, love, laughter, & kindness would make the world a MUCH better place |
Re: Pics of your latest purchase Luna LN-ELIR-3 Full power laser IR illuminator, and a Yankee Hill Machine rail extension. https://i.imgur.com/UfQRBw9.jpg?1 https://i.imgur.com/7LGm3cc.png?1 |
Re: Pics of your latest purchase Quote:
Travis. Now I have lots of research to do so I can find out all what it needs Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Quote:
I bought a 2014 Patriot Latitude, new, in 2014, I love it. It's fast for a 4cyl, it has decent get up & go for passing, mine gets 28mpg, I call it my little sportscar. Handles great, full time 4wd, but has a lockout for 4lo. |
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase Quote:
LMAO! That’s funny! Sent from my iPad using Tapatalk |
All times are GMT -6. The time now is 10:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com