|
Re: Pics of your latest purchase Needed a new beater watch. https://i.imgur.com/g8H4ML0.png |
Re: Pics of your latest purchase Made a trip to the the LHS I bough the BFGs for the Jimny at found some new springs for it since all the springs I’ve been able to find have been too stiff for my liking. https://hosting.photobucket.com/imag.../001(292).HEIC No pics, but also picked up some light weight Associated shock oil, Traxxas TQi Rx, and foam rings for my Clod, once it’s painted. |
Re: Pics of your latest purchase Started to watch MJ on speed channel got into MTs. Found out they had a stampede. Bought one, then went to short course then crawling(still doing it) now back to MONSTER TRUCKS....... These trucks are BADA$$ THO!https://uploads.tapatalk-cdn.com/202...efd6d44b27.jpg Sent from my LGMP450 using Tapatalk |
Re: Pics of your latest purchase Got new shoes for the Capra https://uploads.tapatalk-cdn.com/202...500427ff6e.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Parts for a project build I'm gittin ready to start. Sent from my SAMSUNG-SGH-I337 using Tapatalk https://uploads.tapatalk-cdn.com/202...85a8461074.jpghttps://uploads.tapatalk-cdn.com/202...55b79d4f62.jpg |
Re: Pics of your latest purchase Way too much to list since my last post. But here is one that is a bit forum relaent. Not building a crawler with it. But its a good place to start a cool build that will become a NoPrep Accessory. lol https://i.ibb.co/34gYrHM/165974180-1...92333874-o.jpg https://i.ibb.co/fkT2crJ/166119176-1...71970514-o.jpg https://i.ibb.co/gr1SQCQ/166183364-1...97728773-o.jpg https://i.ibb.co/zFpM0HT/IMG-20210329-211828438.jpg https://i.ibb.co/1q1bKkV/IMG-20210329-211837506.jpg https://i.ibb.co/jfztjWp/IMG-20210329-211846651.jpg |
Re: Pics of your latest purchase Microtech Dirac and Dirac Delta proof run kniveshttps://uploads.tapatalk-cdn.com/202...df3e991ac8.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Midwest Industries SP series 10" handguard, Roscoe Bloodline 10.5" 5.56 barrel, Odin Works AGB, and another SiCo ASR brake/mount. Nobody warns you when you get into suppressors that you'll have a small fortune tied up in muzzle devices. :mrgreen: https://i.imgur.com/yu3zkvE.png?1 https://i.imgur.com/O4sZE5O.png?1 https://i.imgur.com/sM367gr.png?1 https://i.imgur.com/wmpbR0I.png |
Re: Pics of your latest purchase Some new batteries https://uploads.tapatalk-cdn.com/202...5fd9320e7e.jpg Sent from my SAMSUNG-SGH-I337 using Tapatalk |
Re: Pics of your latest purchase Clear orange/red paint for myself and a buddies hardbody build I’m doing, Testors CA glue(which btw I have to get a replacement as the lid wasn’t put on all the way and all of it leaked out in shipping) and some gears for my Dads EcoPower servo that I stripped a gear in. Nothing too crazy lol. Please excuse the messy workbench, I guess that’s what happens when you have 4 projects going on at once, huh? https://uploads.tapatalk-cdn.com/202...a995e63c6c.jpg _________________ 79 F150 SCX10 ii TRXWalker |
Re: Pics of your latest purchase walked in to the local hobby store to get some slash parts and the fed ex guy came in with some boxes and had this, can never just walk out with what i planned! https://uploads.tapatalk-cdn.com/202...9401237477.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase Happy Birthday to me. :) https://scontent.fper10-1.fna.fbcdn....cc&oe=608DB77B |
Re: Pics of your latest purchase Quote:
~ More peace, love, and kindness would make the world a much better place |
Re: Pics of your latest purchase Nighttime pic from yesterday. As soon as it was dropped off I was putting in work. Cleared half a 5 acre section of field and knocked a path through four shooting lanes, all of which has been neglected for the last 4 years since my old 20hp died. Should finish up today and then will need to kill the saplings and small trees too big to bushhog down so I can rip them up in a few weeks. I tried with some 4-5” pines but it just snaps the tap root off. Mahindra 1635 with 3rd function front end loader. Grapple installed at the moment. https://uploads.tapatalk-cdn.com/202...f81f8fe4d0.jpg |
Re: Pics of your latest purchase Finally got what I need, other than paint, 4 AAs, and time to finish my GF-01 build! https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Pics of your latest purchase Got some 3D printed goodies for my SCX24 and Lunchbox, not pictured are the pinion for my Wheely King and Castle Bluetooth programmer that also showed up! https://hosting.photobucket.com/imag.../001(325).HEIC |
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase Happy Birthday to me. :) https://scontent.fper10-2.fna.fbcdn....c5&oe=6092552D |
Re: Pics of your latest purchase Quote:
Yep. Knew that going into it. It’s a mix match of metric and SAE bolts with a front end loader added. QC is lacking as well. Blew a plug out of a hydraulic valve body yesterday and no mention of it in any documentation online or at dealership. We couldn’t find anything to replace it with so I’m leaning towards ORB maybe. I happened to have a fine thread 3/8” cut off bolt from when I did some AAL on my Tacoma 8 years ago that threaded in. Cut off a 1/2” length, beveled the starter thread, and added a flathead notch into the back. Shifter linkage lost its nut and left me in reverse 100 yards from the house. Reversed back home and found a replacement but for it. Had a loose hyd hose first day so checked them all and found a couple more that would’ve worked loose. As for as being compact and having enough power it does that. FEL has enough oomph to pick itself up off the ground and flip it should you want to do so. I ripped up some 6-8” trees yesterday and their roots with a grapple attachment. Some oaks, a pecan, and some invasive Japanese ‘popcorn’ trees. Then swapped to the bucket and moved dirt around until it was level again. |
Re: Pics of your latest purchase Quote:
Have to say though, sittin' in the seat of the tractor, drivin' around the fields kind of relieved some of the stress from other things in life. |
Re: Pics of your latest purchase It's time for a new truck anyways so I threw a deposit down on of these units. Won't be here until June/July though.. The vehicle market is just stupid right now. I put the deposit down 3 days after this truck was announced and there was already 2 people in line ahead of me. AND the dealer will only be receiving 7 of them for our entire city/area. https://picolio.auto123.com/auto123-...scaledown=1024 |
Re: Pics of your latest purchase Quote:
Lol. No doubt. My grapple stopped grappling today. Tracked it down to dealer install wiring to switch. Where they ran it became a pinch point when running the bucket down and it pinched the 12v wire internally. Had to probe the wire before and after the pinched area that didn’t even break the sheathing. Previous tractor was a late ‘70s model Yanmar. Which it was once licensed chinese John Deere. Bought it when the grey market was wide open before all the tariffs and taxes were bad. 100% mechanical aside from the starter. It was almost indestructible until a rare southern hard freeze killed it. Visible crack on the outside of the block and blows really hard from the crankcase vent, too. |
Re: Pics of your latest purchase Quote:
I’m too leery of new vehicles to even consider buying one fresh off the lot. My brother just picked up a VW Atlas and it is crazy the amount of tech in them. I like my steering column and throttle body with a cable to the peddle. |
Re: Pics of your latest purchase Quote:
But a bigger part of me wants something shiny that has warranty.. |
Re: Pics of your latest purchase Quote:
|
Re: Pics of your latest purchase When I bought my 2014 Patriot a few months ago, I was surprised to see how stripped it was for a 2014. Basic radio, manual gauges, non-central manual locks. crank windows, ect... |
Re: Pics of your latest purchase Just picked up this beauty. 2005 Triumph Speed Triple. 26k miles, tuner and exhaust. My best friend owned it since 14 miles and I know it's been very well taken care of. I have wanted this bike for over a decade and the chance popped up and I couldn't say no. https://i.imgur.com/o0uapjA.jpg |
Re: Pics of your latest purchase Quote:
My 1st gen Tacoma has roll down windows, 5 speed, no ABS, and cloth. Only thing special is Toyota’s ADD hubs and not manual ones but that’s not saying much. One thing about buy new domestic is that you can usually order whatever you’d like. I may end up doing that...one day. |
Re: Pics of your latest purchase Quote:
Some of the restomod shops are offering limited warranties now. |
Re: Pics of your latest purchase Quote:
Quote:
|
Re: Pics of your latest purchase |
Re: Pics of your latest purchase Parts for my build show up the other day Sent from my SM-G991U using Tapatalk https://uploads.tapatalk-cdn.com/202...da04e36271.jpg |
Re: Pics of your latest purchase Got this for my SCX24 today, still waiting on the EMax servo though. https://hosting.photobucket.com/imag.../001(343).HEIC |
Re: Pics of your latest purchase All the way from we know where. http://www.rccrawler.com/forum/membe...4480-68751.jpg I think they drop shipped it tho. http://www.rccrawler.com/forum/membe...4480-68752.jpg |
Re: Pics of your latest purchase Picked up some Jeep Moss Green Metallic for the Wild Willy 2 body on my GF-01 from my local automotive paint store. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Pics of your latest purchase Jumped on board with a HH V3 Yeah boyhttps://uploads.tapatalk-cdn.com/202...a0e3fc5201.jpg Sent from my LGMP450 using Tapatalk |
Re: Pics of your latest purchase You have to resize your pics, everything is blurry |
Re: Pics of your latest purchase fishing is finally back, needed a comfier set up this year, may even strap on the crawler for those island piss stops! https://uploads.tapatalk-cdn.com/202...f80aefaef6.jpg Sent from my iPhone using Tapatalk |
Re: Pics of your latest purchase That's to some help from several people, including some very helpful insight & advice from Ikaika (The Crawl Space) & Topher, I have the first new parts for my next C3 build - the G10 version of the GC 4.2, plus front/rear driveshafts from Boom Racing.https://uploads.tapatalk-cdn.com/202...945240d6dc.jpgThank you Topher. Thank you Ikaika. The majority of the parts going into this build are actually going to be 'reclaimed' parts from my previous semi-CAPRA- based C3 rig, CAPbRAstard, and the body has already been selected/ordered...so I'll just need to order a few more parts. As for the remainder of the 'reclaimed' CAPbRAstard parts, they will be going into my new rock racer, which will be based on a cross between the V1S Comp chassis from STH, the Alcista chassis from Krazed Builds, and the Axial Bomber (to be named "CAPbRAstard Too"). Finally, as for what the body will be, the only clue I'm going to give at this time is "Italian exotic". That should get some people's 'wheels' turning. ~ More peace, love, and kindness would make the world a much better place |
Re: Pics of your latest purchase Got these in the mail last couple days. https://hosting.photobucket.com/imag...ey/001(54).jpg Time to wrench |
| All times are GMT -6. The time now is 09:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com