12-18-2014, 03:45 AM | #1 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Mamba max pro question
I got a wraith yesterday and it came with a mamba max pro and tekin roc412 3100. When I got the truck everything was working fine except the brakes they were very strong. The only thing I did was take the battery out of transmitter that I can think of, but now the only thing it does is try to power up then it's starts blinking. Sometimes the blinking is yellow green, sometimes yellow red, sometimes it's all three. For radio gear I have a flysky gt3c and it was also included with truck. I tried to calibrate with the esc it will beep for forwards,reverse and neutral, but will not move forwards or reverse.
|
Sponsored Links | |
12-18-2014, 05:16 AM | #2 |
Rock Crawler Join Date: May 2012 Location: Minneapolis
Posts: 858
| Re: Mamba max pro question
Since you've tried recalibration, try another receiver or rebind the receiver you have. Make sure your throttle trim is centered. Mmp won't calibrate with it off center. If there are any other things in the system, bec light/winch controller, pull them out and try with just the esc, servo, and rx Make sure you're calibrating with a full battery. It may be hitting the lvc for the lipo Google mmp error codes to try and understand your diagnostics. http://www.rogershobbycenter.com/cas...shootingguide/ From these it seems like you have a lvc due to low battery and the esc may not be calibrating due to that. Good luck Last edited by dna4engr; 12-18-2014 at 05:19 AM. |
12-18-2014, 06:25 AM | #3 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Thanks for the info and link. I did charge up the transmitter and the lipo last night when I was messing with it to make sure that wasn't the issue. I printed out the manual last night also haven't had a chance to read it over but I will when I get home from work. Is there a wY to reset settings to default on the esc and the radio?
|
12-18-2014, 07:47 AM | #4 |
RCC Addict Join Date: Mar 2007 Location: Turn the mayflower around.. it will never work
Posts: 1,588
| Re: Mamba max pro question
Put throttle on reverse setting on tx....... Then try to re calibrate.
|
12-18-2014, 10:21 AM | #5 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Pretty sure the 2nd channel was reversed but I will make sure when I get home. Thanks for the tip.
|
12-18-2014, 11:10 AM | #6 | |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| Re: Mamba max pro question Quote:
you really need the castle link to get the most out of your mmp. | |
12-18-2014, 11:48 AM | #7 |
Quarry Creeper Join Date: Feb 2013 Location: hawkins
Posts: 391
| Re: Mamba max pro question
ypu need to try and reverse the channel 2 on the fly sky then you can calibrate it and set it back the way it was
|
12-18-2014, 04:53 PM | #8 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Ok so I hooked my axial radio gear to the esc and it works fine? Do I need to bind my flysky again? And do I need the bind plug for that if so where can I get one
|
12-18-2014, 05:04 PM | #9 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Well it's receiving signal because I have steering and can get the truck to move with the trim or EPA settings. Seems as if it's not receiving throttle signal now?Anyone running a mamba max pro with a gt3c I can get settings from lol.
|
12-18-2014, 05:28 PM | #10 |
RCC Addict Join Date: Nov 2009 Location: New Wilmington, PA
Posts: 1,234
| Re: Mamba max pro question
Did you try to reverse the throttle channel yet?
|
12-18-2014, 05:30 PM | #11 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Yes I have tried reversing the throttle channel.
|
12-19-2014, 01:43 PM | #12 |
RCC Addict Join Date: Oct 2008 Location: south caki laki again
Posts: 1,695
| Re: Mamba max pro question
On your radio set the trim for the throttle channel to neutral, then go over to EPA settins and set those to max both high and reverse. Then recalibrate the radio/esc as normal.
|
12-19-2014, 07:23 PM | #13 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Did that still nothing. I flipped steering and throttle plugs around and using steering the esc works fine but throttle still doesn't control steering. When I adjusted epas I was able to set both forward and backward on the transmitter. Now is my receiver shot or transmitter?
|
12-19-2014, 08:48 PM | #14 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Looks like it's the transmitter. Made a bind plug and bound a old flysky channel to the receiver and it works fine. I was really liking the feel of the gt3c and the fact it has a lipo that's awesome, now to figure out what radio to run now.
|
12-20-2014, 12:24 AM | #15 |
Rock Crawler Join Date: Mar 2006 Location: Benson,NC
Posts: 761
| Re: Mamba max pro question
Well surprise surprise surprise found out if you turn on the transmitter then turn right while holding the back button it resets the transmitter . Now it works fine thanks for everyone's advice and help on the subject. That's the reason I love this community you guys rock |
12-20-2014, 07:48 AM | #16 |
RCC Addict Join Date: Oct 2008 Location: south caki laki again
Posts: 1,695
| Re: Mamba max pro question
glad ya got it.going, now find some rocks n have fun |
12-20-2014, 11:27 AM | #17 |
RCC Addict Join Date: Mar 2007 Location: Turn the mayflower around.. it will never work
Posts: 1,588
| Re: Mamba max pro question
Good good ya got it figured..... So end result was bunch of buttons were pushed and messed up set up ? Just figured I would clarify problem if it was searched by others having same issues. |
Mamba max pro question - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mamba Max Pro Question | kgb424 | Electronics | 3 | 01-21-2014 10:42 PM |
Help please Mamba max pro question | Quartermaster | Electronics | 3 | 09-30-2013 11:39 PM |
mamba max pro question | Dr.Newb | Electronics | 12 | 07-13-2013 11:00 AM |
Mamba Max Pro question | wrightcs77 | Electronics | 4 | 01-23-2010 10:00 AM |
| |