scx10 deadbolt, steering but no throttle

[snapon boy]

I just posted some information in your other post about that IMHO I'd change your pinion to an 11t 32p Robinson racing.

[snapon boy]

I made a mistake and put a to long screw into my transmission housing and trashed it. 100 bucks later won't do that again. But I had similar issues as you that's why I suggested it

[micro racer]

Originally Posted by Jmccallie

The front tires seem to jump now (elevated on a stand) they do not spin the same speed as the back tires if I barely touch the throttle. I don't know if this is even anything, just trying to be as informative as I can.

From this, I would suggest that the front axle is binding or your driveshafts are not phased correctly.

The larger tires will make a slight gearing change, about 2 teeth in my 48 pitch gears (probably only about one tooth for 32p). First, I only geared down the 2 teeth to slow my truck down, but later dropped another 2 to gain some torque.