RCCrawler Forums

billj · 12-27-2010, 06:11 AM

Quote:

Originally Posted by DickyT

I told you he would have an answer for you

Nice driving yesterday Bill, you are starting to get used to the rig and it shows. The only time "Stabber" surfaced was when you got into trouble spots. If you ever decide to stop running this chassis ( I know you are jealous of Tyler's

) I want it, after yesterday it is apparent I need a spare....

Im gonna keep it for a while, it has sentimental value

But the BJv4 is hot

Looks like the way i drive, i might need to make up a spare

Tydl · 12-27-2010, 06:58 PM

Pretty good driving yesterday Billj, really bad luck. I've never seen anybody at miramar driving thru the weeds around the rocks and literally just flip over!(weeds wraped around axle very quickly)

Better luck next time.

billj · 12-27-2010, 07:04 PM

Quote:

Originally Posted by Tydl

Pretty good driving yesterday Billj, really bad luck. I've never seen anybody at miramar driving thru the weeds around the rocks and literally just flip over!(weeds wraped around axle very quickly)

Better luck next time.

Thanks wade, yeah Miramar was out to get me yesterday

Maybe both of us, you did good until you started eating servo horns!!

DickyT · 12-31-2010, 01:54 PM

Here is that pic from today Bill. Nice driving in and out of that,

billj · 12-31-2010, 08:38 PM

Thanks for putting up the that pic

I like the teeter-totter action!!

billj · 01-02-2011, 05:43 PM

Had a comp today in North Palm Beach, I did ok

Finished third behind DickyT, and Richardgarrett56. All in all a pretty good day, completed 3 of 5 courses. And got my first perfect run (-20)

. Truck did well, yesterday i changed the shock oil from 30w to 50w. The truck seemed more predictable with the oil change. (thanks for the advice DickyT). Still want to get some firmer outer foams from Crawler Innovations, but still short on cash from x-mass. All in all not a bad day. i dont mind finishing behind guys that finished 33rd and 74th at Nats.For now

DickyT · 01-03-2011, 06:15 AM

Congrats on the podium finish yesterday Bill

billj · 01-03-2011, 06:50 AM

Thanks Richard

Same to you !!

billj · 01-07-2011, 04:49 PM

Made a little change today, Narrowed the front of my cab a little. Since the UGC MOA chassis is designed for the XR10 axles,it was hard to inboard the front shocks (without a binding issue). So i took the front spacers out from between the lower chassis and the cab. Built new cross braces and panels. I ended up narrowing the front 14mm (almost 9/16"). I like it much better now, got a little more steering . And the front shocks do not stick out so far . Of course the real test is tomorrow at our local comp. Ill let you know how it goes.

Here is the old hood panel compared to the new one

She has a little wedge shape to it now.

Front shocks still clear the motor/axle cases fine

Finally got to use the UGC paint masks Juan sent me. Came out pretty good

crazyorigin · 01-07-2011, 06:06 PM

The chassis looks great narrowed up front like that, kind of like the beatlejuice. the panels look really sweet with the UGC logo stenciled in, i should stop sucking at painting and do something nice for my next set. the rocks you guys have down there look like they would be rough on panels.

billj · 01-07-2011, 06:34 PM

Quote:

Originally Posted by crazyorigin

The chassis looks great narrowed up front like that, kind of like the beatlejuice. the panels look really sweet with the UGC logo stenciled in, i should stop sucking at painting and do something nice for my next set. the rocks you guys have down there look like they would be rough on panels.

Thanks, i think (hope) the chassis will work this way

My son (Rocky666) looked at it and shook his head and said "Your jealous of my BJ4" . And yes by the second course tomorrow , my panels will be trashed. Especially as much time as i spend on my lid

As far as painting, just take your time. Anybody can do a decent paint job, look at DickyT's

DickyT · 01-07-2011, 07:32 PM

Nice work Bill! I have some new panels drying right now. I used a ugc stencil too

billj · 01-07-2011, 07:46 PM

I really like the stencils/masks, whatever they are called. They leave nice clean edges

DickyT · 01-07-2011, 08:16 PM

Quote:

Originally Posted by billj

I really like the stencils/masks, whatever they are called. They leave nice clean edges

Looks like we both got orange...

billj · 01-07-2011, 08:26 PM

Quote:

Originally Posted by DickyT

Looks like we both got orange...

billj · 01-08-2011, 06:13 PM

Had a local comp today, got a fourth place.

Not to happy with that, but i completed 3 of 4 courses.

Had a 6, -5, 5. Choked on the finals course with a 28. But the truck worked well with the narrowed front chassis.

billj · 01-13-2011, 03:57 PM

Got a few goodies today

RCBros 7075 lockers and flush mount servo clamps. Also a ti lunsford link for my steering. Nice stuff

While i had the gears out decided to drill them.

richardgarrett56 · 01-13-2011, 04:06 PM

just do em all

billj · 01-13-2011, 05:50 PM

Quote:

Originally Posted by richardgarrett56

just do em all

I did front and rear

Only got one set in the pics

billj · 01-14-2011, 12:17 PM

Well from what Juan and DickyT are saying we (UGC team drivers) should be getting the carbon fiber lower chassis plates soon. That will be cool, im stoked

01-02-2011, 05:43 PM	#166
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Had a comp today in North Palm Beach, I did ok Finished third behind DickyT, and Richardgarrett56. All in all a pretty good day, completed 3 of 5 courses. And got my first perfect run (-20). Truck did well, yesterday i changed the shock oil from 30w to 50w. The truck seemed more predictable with the oil change. (thanks for the advice DickyT). Still want to get some firmer outer foams from Crawler Innovations, but still short on cash from x-mass. All in all not a bad day. i dont mind finishing behind guys that finished 33rd and 74th at Nats.For now

01-03-2011, 06:50 AM	#168
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Thanks RichardSame to you !!

01-07-2011, 04:49 PM	#169
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Made a little change today, Narrowed the front of my cab a little. Since the UGC MOA chassis is designed for the XR10 axles,it was hard to inboard the front shocks (without a binding issue). So i took the front spacers out from between the lower chassis and the cab. Built new cross braces and panels. I ended up narrowing the front 14mm (almost 9/16"). I like it much better now, got a little more steering . And the front shocks do not stick out so far . Of course the real test is tomorrow at our local comp. Ill let you know how it goes. Here is the old hood panel compared to the new one She has a little wedge shape to it now. Front shocks still clear the motor/axle cases fine Finally got to use the UGC paint masks Juan sent me. Came out pretty good Last edited by billj; 01-07-2011 at 05:00 PM.

12-27-2010, 06:58 PM	#162
Tydl RCC Addict Join Date: Nov 2008 Location: I don't think theres rocks in Florida Posts: 1,228	Pretty good driving yesterday Billj, really bad luck. I've never seen anybody at miramar driving thru the weeds around the rocks and literally just flip over!(weeds wraped around axle very quickly) Better luck next time.

12-31-2010, 01:54 PM	#164
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	Here is that pic from today Bill. Nice driving in and out of that,

12-31-2010, 08:38 PM	#165
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Thanks for putting up the that pic I like the teeter-totter action!!

01-03-2011, 06:15 AM	#167
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	Congrats on the podium finish yesterday Bill

01-07-2011, 06:06 PM	#170
crazyorigin Sometimes, I make things. Join Date: May 2009 Location: Mt. Upton Posts: 1,043	The chassis looks great narrowed up front like that, kind of like the beatlejuice. the panels look really sweet with the UGC logo stenciled in, i should stop sucking at painting and do something nice for my next set. the rocks you guys have down there look like they would be rough on panels.

01-07-2011, 07:32 PM	#172
DickyT I wanna be Dave Join Date: Oct 2007 Location: Scumrise, Flooriduh Posts: 5,181	Nice work Bill! I have some new panels drying right now. I used a ugc stencil too

01-07-2011, 07:46 PM	#173
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	I really like the stencils/masks, whatever they are called. They leave nice clean edges

01-08-2011, 06:13 PM	#176
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Had a local comp today, got a fourth place. Not to happy with that, but i completed 3 of 4 courses. Had a 6, -5, 5. Choked on the finals course with a 28. But the truck worked well with the narrowed front chassis.

01-13-2011, 03:57 PM	#177
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Got a few goodies today RCBros 7075 lockers and flush mount servo clamps. Also a ti lunsford link for my steering. Nice stuff While i had the gears out decided to drill them.

01-13-2011, 04:06 PM	#178
richardgarrett56 Rock Crawler Join Date: Feb 2010 Location: chin ckeck Posts: 752	just do em all

Sponsored Links

01-14-2011, 12:17 PM	#180
billj I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl Posts: 2,128	Well from what Juan and DickyT are saying we (UGC team drivers) should be getting the carbon fiber lower chassis plates soon. That will be cool, im stoked

RCCrawler Forums

Thread: billj's first MOA build