RCCrawler Forums

Jeepguts · 11-07-2010, 09:27 PM

Truck Base: Custom Aluminum Chassis
ESC: XL-5
Motor: Titan 550
Servo: Dual MG996R (HIGH) quality servos from China..20 Bucks for both
Trans: Stampede Locked
Axles: Custom Steel Tube Axles/ Revo shafts all around
Tires: Maxx Tires
Wheelbase: 17 1/2"
Width: 17 1/4"
Diff Clearance: 3 1/2"
Center Chassis Clearance: 4 1/2"
Height: 11 1/4"
Diff: Maxx Diffs Locked

freakofnature · 11-09-2010, 05:37 AM

here is my mrc/hbz 1.9 rig the chasis is a hbx 1-niner it has hot racing gears in the tranny and losi mlst gears in the axles. its powered by a micro sidewinder it also has dna assassins with pro line chisels wrapped around them

next up is my newer venom creeper she is basicly stock and is powered by a fxr that turns a integy 35t motor and is currently running proline badlands

flex shot

last up is my losi micro its set for droop and has 2 washers stuck to both front tires the batt has been relocated to the rear axle and every thing else is all stock
this is the only pic i have of her (she got traded today)

txcrawl · 11-26-2010, 11:22 AM

Truck Base :rc4wd rock rider

ESC:novak goat

Motor(s):novak 18.5T brushless

Servo(s):hitec 5645

Trans:axial with robinson racing gears

Axles:axial with robinson racing gears

Tires:hb rovers white compound

WB:12.5"

Overall Width:11.5"

Diff clearance:1 3/4"

Center Chassis clearance:2"

Overall height:6.5"

txcrawl · 12-14-2010, 02:17 PM

tis is my dads comp crawler dna chassis dna dig axial based trans has robinson racing gears proline weighted wheels hot bodie rovers derlin links novak 55 motor and rooster esc hitec 5645 servo behind the axle steering kit metal knuckles and inners and metal outers on rear axial wheel spacers

im2tall · 12-19-2010, 07:56 AM

http://

Update!!

vvvv
http://

02tac · 12-19-2010, 09:15 PM

dockman · 12-25-2010, 05:27 PM

Need a micro in this thread! This is my first and currently only crawler, and I love it

Truck Base : Losi Micro Crawler with a pinch chassis

ESC: Stock Losi esc/rx decased and heat shrinked

Motor: Stock, soon to be one of getbents 80t

Servo: Hitech HS-65MG

Trans: Stock in a hot racing trans case

Axles: Stock micro crawler axles

Tires: Stock and RC4WD micro crushers

WB: 4 5/8"

Overall Width: 3 1/2"

Diff clearance: 5/8"

Center Chassis clearance: 6/8"

Overall height: 3"

xjmonkey · 01-01-2011, 10:53 PM

Truck Base :custom frame

ESC: 20 years old

Motor(s): 55t

Servo(s): idk anymore

Trans: wheely king

Axles: wheely king

Tires: hb white dot 2.2s

xjmonkey · 01-01-2011, 10:55 PM

all stock maxstone 10

diesel72 · 01-03-2011, 12:36 PM

Mah Bebe:

KING_PALM · 01-11-2011, 02:19 AM

Venom creeper
HR knuckles, c hubs, rear lockouts
novak crawler rooster
novak 55t

Axial SCX10
novak crawler rooster
integy 45t

mostly stock besides that.

didnt know the TR's all came in green or i would have painted it a different color..

Linco · 01-12-2011, 08:42 PM

XR-10, Novak M2 with 55T Terra Claws, HiTec servo, and Rover Tires
My 4th ever RC paint job
Thank You! to "ynmech" for the assist with radio set up

reden · 01-30-2011, 07:17 AM

Bully, T1E, Vanquish & HB Rovers.

m0nster · 02-02-2011, 11:50 AM

DMG Nemesis
T-rex 60 ARB edition
novak Rooster
Huge rc4wd reservoir shocks with the resies removed.
8-Shooters / Rover blue dot
55t integy lathe / r2d
custom steering linkage, upper 4 link mount
just made some new "skin" graphics for the aluminum panels
To-Do
-might repaint the beadlock rings. its a little too much christmas with the red ARB diff covers.
-new shocks? articulation is surprisingly limited. shocks seem to be the culprit the shock ends are huge and hit the link mounts.
-Dig servo and 3rd channel mod to my traxxas 2.4 radio
-new lipo batteries to replace the long lasting but bulky and very heavy 5k mah
nimh
-lower turn motor to get a bit more wheelspeed
-chassis polishing or matte black havent decided.
-lights, because they are cool.
-winch and tow hooks, also because they are cool.

Tom94offroaduk · 02-07-2011, 11:17 AM

hey, i know im a bit l8 posting lol, but here ya go-- my rig-- it's got weighted front wheels, star cur foams, electrics completely moved from stock, battery on front axle, suspention mod's etc.......

02tac · 02-15-2011, 11:12 AM

Added an RJ Speed body and J Concepts tires.

BC-Brian · 02-22-2011, 08:39 PM

Berg V2 Axles with Tracer chassis.

SLW V3 wheels

Sedona Tires

Tekin FXR's

Tekin 35T handwound Motors

With new paint

FiremanCrawler · 02-27-2011, 02:15 PM

dubAron · 03-14-2011, 11:29 PM

Rig I just sold not to long ago

My scaler

PVG · 03-18-2011, 03:35 PM

Here is a couple of pictures of my crawler.
I still need to make a few pictures in action.

Info.
Brand : HSP
Scale : 1: 8
Motors : stock
Esc : stock
Tires : stock
Weight : more then 5 kilograms ( dont know the weight in pounds )

Inprovements
Better servo Hitech 25 kilograms titanium gear . ( not yet in the picture

)
Baterypack 3000 mah stickpack
Remote controle 2.4 ghz 2 channel ( not yet in the picture )

I will update this post when i got new and better pictures .
I hope to get a custom frame

.

( dont make fun off me for my pink antenne !!!!!!! )

11-09-2010, 05:37 AM	#262
freakofnature Rock Crawler Join Date: May 2009 Location: branchville Posts: 519	my 1.9 and 2.2 and micro here is my mrc/hbz 1.9 rig the chasis is a hbx 1-niner it has hot racing gears in the tranny and losi mlst gears in the axles. its powered by a micro sidewinder it also has dna assassins with pro line chisels wrapped around them next up is my newer venom creeper she is basicly stock and is powered by a fxr that turns a integy 35t motor and is currently running proline badlands flex shot last up is my losi micro its set for droop and has 2 washers stuck to both front tires the batt has been relocated to the rear axle and every thing else is all stock this is the only pic i have of her (she got traded today) Last edited by freakofnature; 11-13-2010 at 10:01 PM.

12-19-2010, 07:56 AM	#265
im2tall Pebble Pounder Join Date: Jan 2010 Location: brooklyn Posts: 161	The Hammer Head!!(creeper)vv http:// http:// http:// http:// http:// Update!!vvvv http:// Last edited by im2tall; 01-23-2011 at 09:36 AM.

01-01-2011, 10:55 PM	#269
xjmonkey Newbie Join Date: Jan 2011 Location: reno Posts: 14	my maxstone all stock maxstone 10

01-12-2011, 08:42 PM	#272
Linco Newbie Join Date: Aug 2010 Location: Ontario Posts: 3	My XR XR-10, Novak M2 with 55T Terra Claws, HiTec servo, and Rover Tires My 4th ever RC paint job Thank You! to "ynmech" for the assist with radio set up Last edited by Linco; 01-12-2011 at 08:45 PM.

01-30-2011, 07:17 AM	#273
reden Quarry Creeper Join Date: Apr 2010 Location: Centurion, GP, RSA Posts: 430	Mr Creepy Bully, T1E, Vanquish & HB Rovers.

11-07-2010, 09:27 PM	#261
Jeepguts Newbie Join Date: Jul 2010 Location: Desert Posts: 2	Truck Base: Custom Aluminum Chassis ESC: XL-5 Motor: Titan 550 Servo: Dual MG996R (HIGH) quality servos from China..20 Bucks for both Trans: Stampede Locked Axles: Custom Steel Tube Axles/ Revo shafts all around Tires: Maxx Tires Wheelbase: 17 1/2" Width: 17 1/4" Diff Clearance: 3 1/2" Center Chassis Clearance: 4 1/2" Height: 11 1/4" Diff: Maxx Diffs Locked

11-26-2010, 11:22 AM	#263
txcrawl Pebble Pounder Join Date: Nov 2010 Location: Texas where its too damn hot! Posts: 190	Truck Base :rc4wd rock rider ESC:novak goat Motor(s):novak 18.5T brushless Servo(s):hitec 5645 Trans:axial with robinson racing gears Axles:axial with robinson racing gears Tires:hb rovers white compound WB:12.5" Overall Width:11.5" Diff clearance:1 3/4" Center Chassis clearance:2" Overall height:6.5"

12-14-2010, 02:17 PM	#264
txcrawl Pebble Pounder Join Date: Nov 2010 Location: Texas where its too damn hot! Posts: 190	tis is my dads comp crawler dna chassis dna dig axial based trans has robinson racing gears proline weighted wheels hot bodie rovers derlin links novak 55 motor and rooster esc hitec 5645 servo behind the axle steering kit metal knuckles and inners and metal outers on rear axial wheel spacers

12-19-2010, 09:15 PM	#266
02tac Pebble Pounder Join Date: Oct 2010 Location: In the dog house Posts: 117

12-25-2010, 05:27 PM	#267
dockman Quarry Creeper Join Date: Oct 2010 Location: Newport, South Wales Posts: 257	Need a micro in this thread! This is my first and currently only crawler, and I love it Truck Base : Losi Micro Crawler with a pinch chassis ESC: Stock Losi esc/rx decased and heat shrinked Motor: Stock, soon to be one of getbents 80t Servo: Hitech HS-65MG Trans: Stock in a hot racing trans case Axles: Stock micro crawler axles Tires: Stock and RC4WD micro crushers WB: 4 5/8" Overall Width: 3 1/2" Diff clearance: 5/8" Center Chassis clearance: 6/8" Overall height: 3"

01-01-2011, 10:53 PM	#268
xjmonkey Newbie Join Date: Jan 2011 Location: reno Posts: 14	Truck Base :custom frame ESC: 20 years old Motor(s): 55t Servo(s): idk anymore Trans: wheely king Axles: wheely king Tires: hb white dot 2.2s

01-03-2011, 12:36 PM	#270
diesel72 Pebble Pounder Join Date: Dec 2004 Location: South Lyon Posts: 139	Mah Bebe:

01-11-2011, 02:19 AM	#271
KING_PALM Newbie Join Date: Jan 2011 Location: ORANGE Posts: 41	Venom creeper HR knuckles, c hubs, rear lockouts novak crawler rooster novak 55t Axial SCX10 novak crawler rooster integy 45t mostly stock besides that. didnt know the TR's all came in green or i would have painted it a different color..

02-02-2011, 11:50 AM	#274
m0nster Quarry Creeper Join Date: Oct 2010 Location: Nashville TN Posts: 347	DMG Nemesis T-rex 60 ARB edition novak Rooster Huge rc4wd reservoir shocks with the resies removed. 8-Shooters / Rover blue dot 55t integy lathe / r2d custom steering linkage, upper 4 link mount just made some new "skin" graphics for the aluminum panels To-Do -might repaint the beadlock rings. its a little too much christmas with the red ARB diff covers. -new shocks? articulation is surprisingly limited. shocks seem to be the culprit the shock ends are huge and hit the link mounts. -Dig servo and 3rd channel mod to my traxxas 2.4 radio -new lipo batteries to replace the long lasting but bulky and very heavy 5k mah nimh -lower turn motor to get a bit more wheelspeed -chassis polishing or matte black havent decided. -lights, because they are cool. -winch and tow hooks, also because they are cool.

02-07-2011, 11:17 AM	#275
Tom94offroaduk Pebble Pounder Join Date: Dec 2010 Location: United Kingdom - uk Posts: 164	hey, i know im a bit l8 posting lol, but here ya go-- my rig-- it's got weighted front wheels, star cur foams, electrics completely moved from stock, battery on front axle, suspention mod's etc.......

Sponsored Links

02-27-2011, 02:15 PM	#278
FiremanCrawler Newbie Join Date: Jun 2007 Location: The South Posts: 16

Members' Rides - No talking - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What the #$%#$#@ are ya talking about?	Paul58	Newbie General	10	01-13-2013 04:40 PM
Anybody know what im talking about?!	shadowrejects	Chit Chat	2	05-14-2010 06:26 AM
members 1.1 rides?	SaVaGe MaN SS	Chit Chat	4	03-28-2008 02:48 PM

02-15-2011, 11:12 AM	#276
02tac Pebble Pounder Join Date: Oct 2010 Location: In the dog house Posts: 117	Added an RJ Speed body and J Concepts tires.

02-22-2011, 08:39 PM	#277
BC-Brian RCC Addict Join Date: Jul 2009 Location: Near Boston Posts: 1,233	Mine Berg V2 Axles with Tracer chassis. SLW V3 wheels Sedona Tires Tekin FXR's Tekin 35T handwound Motors With new paint

03-14-2011, 11:29 PM	#279
dubAron RCC Addict Join Date: Nov 2008 Location: Santa Fe, NM Posts: 1,265	Rig I just sold not to long ago My scaler

03-18-2011, 03:35 PM	#280
PVG Newbie Join Date: Mar 2011 Location: Netherlands Posts: 3	Here is a couple of pictures of my crawler. I still need to make a few pictures in action. Info. Brand : HSP Scale : 1: 8 Motors : stock Esc : stock Tires : stock Weight : more then 5 kilograms ( dont know the weight in pounds ) Inprovements Better servo Hitech 25 kilograms titanium gear . ( not yet in the picture ) Baterypack 3000 mah stickpack Remote controle 2.4 ghz 2 channel ( not yet in the picture ) I will update this post when i got new and better pictures . I hope to get a custom frame . ( dont make fun off me for my pink antenne !!!!!!! )

RCCrawler Forums

Thread: Members' Rides - No talking