| |
05-05-2010, 02:09 PM
| #241 |
| Pebble Pounder Join Date: Jul 2009 Location: Woodburn
Posts: 189
| 
here's my Bully.
 |
|  |
| Sponsored Links | |
| | |
|
05-17-2010, 02:34 PM
| #242 |
| Newbie Join Date: Jul 2009 Location: Leesport
Posts: 25
|
Props on the VW body  |
|
| |
|
06-04-2010, 01:33 PM
| #243 |
| Quarry Creeper Join Date: May 2010 Location: Plumas county
Posts: 208
|
Old picture. ax10 sidewinder esc vxl 3500kv motor (32p 9/5  homemade steel bottom links Homemade steel steering link Rear shocks- emulsion duratrax bodys, trx Tin shafts, non progressive trx white spings Front shocks- Traxxas ultras. Plastic bodys, aluminum caps, axial Tin shafts, duratrax green spings stampede vxl tranny locked stock axels w/ lockers wb: 12.7" Height: 8" Legnth: 17 1/2" Ground clearance Skid: 2.4" Front diff: 1.5" Rear diff: 1.6" stock beadlock wheels proline moab m3 tires 1 1/2 lbs in each front tire tower pro hitourqe servo no bec yet...... no dig...... dalewheat.com "tiny cylon" red led rear display glorcs hat lamp old duratrax body hacked pede body  Last edited by Hvrc; 06-04-2010 at 04:54 PM. Reason: Old pic. Need to update. Photobucket.com/cornbread7o7 |
|
| |
|
06-04-2010, 02:16 PM
| #244 |
| Rock Crawler Join Date: Jun 2010 Location: Forsyth County, Georgia
Posts: 617
|
Truck Base : Tamiya XC/CC01 ESC: Standard Tamiya Motor: intec 55t Servo: Hitec Deluxe HS-485HB Trans: Does the CC have a trans? Axles: Standard Tamiya Tires: Losi Mini Rock Bashers WB: 8 in. Overall Width: 7.3 in. Diff clearance: Front: about 1.5 in. Center Chassis clearance: 2.5 in. Overall height: 8.5 in.   If this is posted in the wrong place please correct me Last edited by LR3; 06-04-2010 at 04:31 PM. |
|
| |
|
06-18-2010, 06:19 PM
| #245 |
| Newbie Join Date: Jun 2010 Location: Kaneohe
Posts: 26
|
Rig: Tamiya High lift. added on 2.2 rc4wd crawler tires,4-link,servo moved to the axle, nissan titan body....electronics suck and motor is black can......    |
|
| |
|
06-19-2010, 12:29 AM
| #246 |
| I wanna be Dave Join Date: Sep 2009 Location: Nor Cal
Posts: 2,213
|
Here's my VP AX10 Shafty Rig
|
|
| |
|
06-25-2010, 08:36 AM
| #247 |
| Newbie Join Date: Aug 2005 Location: Oklahoma
Posts: 14
| It's been a while since I've posted....
Been away for a while(5 years)Back then I built this abomination with help from this site.  The hobby sure has changed in 5 years...lot's of cool stuff available, so I picked up an Axial Scorpion ARTR.  Right now it has the stock axial 55 turn motor and Traxxas XL-5 ESC, reciever and 2056 servo that I robbed from my stampede just to get me by. I added a set of Rovers and have the Novak Rooster Crawler/55 turn motor combo and a HiTec 645MG servo on it's way. I also plan on adding weight to the wheels and mounting the battery on the front axle. It's good to be back in the old money pit! Robert Last edited by RobCrawler65; 06-25-2010 at 08:40 AM. |
|
| |
|
07-05-2010, 08:38 PM
| #248 |
| Rock Crawler Join Date: May 2010 Location: San Antonio, TX
Posts: 901
| Gmade R1   |
|
| |
|
07-15-2010, 05:44 PM
| #249 |
| Rock Stacker Join Date: Jun 2010 Location: farmington
Posts: 78
|  Truck Base : axial ax-10 ESC: outcry esc Motor(s):rc4wd 35t can Servo(s): hs645mg Trans: stock Axles: axial(stock) Tires:rovers (white) WB:12-1/2~ Overall Width:10-1/2" Diff clearance:1-1/2" Center Chassis clearance:2-5/8" Overall height:6-5/8"  Truck Base : losi micro rockcrawler ESC: stock esc Motor(s): stock Servo(s): stock Trans: stock Axles: losi(stock) Tires:losi claws (stock) WB: 5"~ Overall Width:3-3/8" Diff clearance: 9/16" Center Chassis clearance:3/4" Overall height: 2-3/4" Last edited by Ndnchief10; 07-29-2010 at 09:04 AM. Reason: wrong link |
|
| |
|
07-15-2010, 06:46 PM
| #250 |
| Rock Crawler Join Date: Mar 2006 Location: Arrowhead Diggin
Posts: 622
| Truck Base: Axial ESC: FXR Motor(s): 55t Integy Servo(s): JR 9100 Trans: Axial Chassis: GC2 Axles: Axial Tires:White Dot Rovers, with Nova's, VP Dirty Hairys up front, and SLWs out back WB: 12 1/4    Last edited by Jake; 08-01-2010 at 08:24 AM. |
|
| |
|
07-22-2010, 10:11 AM
| #251 |
| Rock Stacker Join Date: Oct 2009 Location: Amarillo
Posts: 89
|
My RTR bully, new hobbico high tourque servo and metal rods ends are the only thing Ive changed Maxamps 1550 man 3s lipos     |
|
| |
|
08-21-2010, 02:24 PM
| #252 |
| Newbie Join Date: Aug 2010 Location: arizona
Posts: 24
|
my LCC MoA. "LazyExpress" cut n flipped chassis 35t/rooster punkdig 9100t leopards 6 3/4" overall height 3 1/2" clearance |
|
| |
|
09-03-2010, 05:16 PM
| #253 |
| RCC Addict Join Date: Nov 2007 Location: somewhere
Posts: 1,405
|
this thread is 5 years old im board and went from page one all the way threw.. it interesting how the crawler have changed over the years
|
|
| |
|
09-04-2010, 08:26 PM
| #254 |
| Rock Stacker Join Date: Jan 2010 Location: Dallas
Posts: 69
|  Bling it bitches! Monster energy tuber! Color Changing Paint!      Last edited by MRCking; 09-05-2010 at 04:00 PM. |
|
| |
|
09-04-2010, 08:45 PM
| #255 |
| Rock Stacker Join Date: Jan 2010 Location: Dallas
Posts: 69
| This is the truck I use to run to and from the shop!   |
|
| |
|
09-19-2010, 11:06 AM
| #256 |
| Newbie Join Date: Sep 2010 Location: southbay
Posts: 4
|    |
|
| |
|
09-19-2010, 07:05 PM
| #257 |
| Quarry Creeper  Join Date: Feb 2008 Location: Tumwater Wa.
Posts: 345
|
My crawler is quieter than expected and smooth like butter. I even went as far as throwing my own paint job on the body, and I just want to say that I am getting better at painting these little things and really like this paint scheme. This is my 5lbs.3.5oz. cralwer in comp form.           and I actually had three done and running at once :applause:  |
|
| |
|
09-24-2010, 03:15 PM
| #258 |
| Rock Crawler Join Date: Jul 2008 Location: E. City
Posts: 883
|
Guess I'll throw mine in here: Tamiya TXT-1, needs new axle cases Twin 550's Cut and modded chassis BTA Steering   Tamiya Tundra High Lift Mostly stock Mud Thrashers Full LED's Custom brass hitch and hitch cover     The newest member of the family: Losi Comp Crawler Novak brushless crawler esc/motor Delrin lower links Delrin OTA steering link Proline Rockstar body    |
|
| |
|
09-27-2010, 08:46 PM
| #259 |
| Newbie Join Date: Sep 2010 Location: middleburg,fl
Posts: 3
|
heres my axial with a proline f250 body    |
|
| |
|
09-27-2010, 09:20 PM
| #260 |
| I wanna be Dave Join Date: Jan 2006 Location: ...the burning end of the rope.
Posts: 5,013
|
My 2.2 Pro Creeper with RMDesignworks Vulture chassis RTR WT. 6 lbs 3.2 oz. WB 12.25-12.5" 2.2 Pro Rig Rovers White Dot siped RMDW Paradox Dual Disk Foams RMDW Paradox Pin Lox cvd pin retainers 55t motor Axle plates f/r---rear for proper link geometry and battery relocate,stock front for BTA RMDW VULTURE CHASSIS RMDW Paradox Axle Trusses coming soon CC BEC 10amp Novak Rooster Crawler Novak Smart Stop 3S Lipo Cut-off 3S lipo Lipo on rear axle Traxxas Steel yokes and Long Truck Shafts cut to fit Losi 4" shocks w/ White springs and 25wt oil Spektrum DX3E 2.4 ghz , 3rd channel for DIG Spektrum S200 dig servo RMDW Custom Dig servo mount METAL Putty locked lockers Hot Racing Aluminum C's Hot Racing Aluminum knuckles Hot Racing Aluminum rear lock outs 2.2 1.5" wide CKRC Link "Murdered Out" Wheels w/ Berg Gold rings Shaved axle housings RMDW Flex Skid Modified front suspension for 52* steering angle Front Links and shocks moved inboard Stock Creeper cvd's     Last edited by rmdesignworks; 09-27-2010 at 09:33 PM. |
|
| |
 |
Members' Rides - No talking - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What the #$%#$#@ are ya talking about? | Paul58 | Newbie General | 10 | 01-13-2013 04:40 PM |
| Anybody know what im talking about?! | shadowrejects | Chit Chat | 2 | 05-14-2010 06:26 AM |
| members 1.1 rides? | SaVaGe MaN SS | Chit Chat | 4 | 03-28-2008 02:48 PM |
| |
Linear Mode
