12-28-2007, 03:42 PM | #1 |
Quarry Creeper Join Date: Mar 2007 Location: Beaver Dam
Posts: 225
| longer stub shafts?
I have a hi Lift I am running 2.2s on and the Stock stub axles in the hub are barely long enough to grab the Nylon for the wheel nut. I am hoping to run the thicker grey Traxxas 12mm hexes but then the shafts will be way too short and I will loose wheels constantly. I know the hot trick on the TLT was to run Blackfoot stubs, but would this work on the Hi lift? other then something like this I need a narrow set of wideners I am looking for only like a 1/8th inch so I do not need anything as big as the Junfac or similar kits. Any help would be appreciated
|
Sponsored Links | |
12-28-2007, 03:51 PM | #2 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
Rears for the Tamiya TG10.
|
12-28-2007, 03:55 PM | #3 |
Quarry Creeper Join Date: Jul 2007 Location: Orting
Posts: 377
|
i run these long axles without having to do any mods to it. direct bolt in. you can run the wider traxxas hexs or your can even run 1/2 cvd spacer with no problem. http://rcpcrawlers.com/product.php?p...&cat=17&page=2 |
12-28-2007, 03:55 PM | #4 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
Beat ya! |
12-28-2007, 04:37 PM | #5 |
Quarry Creeper Join Date: Mar 2007 Location: Beaver Dam
Posts: 225
| thanks guys you rock.
Thanks for the assist. It seems like it is always tricky to do a smaller mod. On alot of this stuff it is still all or nothing, and I just don't want to widen my truck so it is like a foot wide.
|
| |