RCCrawler Forums

1badxj · 05-13-2009, 08:29 PM

This is my favorite large scale buggy for sure, Glad i found the build thread finally. Nice work

JasonInAugusta · 05-13-2009, 09:21 PM

I got so frustrated with this buggy today I almost threw the damn thing in the lake.

Bent a barrel nut and busted a rear lockout.

Two separate incidents.

2JSC · 05-13-2009, 09:35 PM

You are too hard on yo sh!t.

JasonInAugusta · 05-13-2009, 09:38 PM

12lbs at speed across the rocks.

I wasn't going easy on it.

Also launched it off a 3 ft droop topped out in 2nd gear.

2JSC · 05-13-2009, 09:40 PM

Lets see some carnage pics!

2JSC · 08-07-2009, 02:07 PM

You got quite a collection going there Ed. Rig looks as good as ever.

nathanotis · 08-07-2009, 02:44 PM

Quote:

Originally Posted by JasonInAugusta

...anymore I view crawlers as work and, for me, that has taken the fun out of crawling.

Best way to kill a hobby is to make a job out of it, that's for sure. It's happened to many of my 1:1 friends.

\oo/_

_\oo/
n.

CrazyAce211 · 08-07-2009, 05:17 PM

What kind of axles are those?

Siggy · 08-07-2009, 08:26 PM

Quote:

Originally Posted by 2JSC

You got quite a collection going there Ed. Rig looks as good as ever.

Thanks James. If you like, I'll post some outdoors and Go Fast, soon as I get it all set-up for the task.

BTW Did you know that this Campbell share the same dimension as Poison IVY? Hmm, Large Scale Jeep

It's now powdercoated in Black and am figuring out best axles for these.

Quote:

Originally Posted by CrazyAce211

What kind of axles are those?

TXT-1 axles, I believe. If RC4WD does longer width of the aluminum or even better, a steel version of the Black Widow (Spyder) axles, a pair would find their way under these, for sure.

Outdoor:

Name: Campbell.jpg
Views: 1192
Size: 55.5 KB

JasonInAugusta · 08-08-2009, 09:23 AM

Nice!

Glad you're enjoying it!

ecoli · 08-10-2009, 01:18 PM

Looks good Ed. Good to see it went to someone else who can compare this to one of the Campbell frames I built just like Jason did

!

Siggy · 08-10-2009, 07:27 PM

Quote:

Originally Posted by JasonInAugusta

Nice!

Glad you're enjoying it!

Absolutely extremely enjoyable, THANKS! She's just one of the best drives, if you ask me. However, her imposing stance never fails to draw the crowd's attention even among those that never saw or know anything about rock crawling. Maybe not like a charismatic leader but definitely an exceptional show Buggy. THANKS!

Name: BLMotor.jpg
Views: 1072
Size: 49.8 KB

Quote:

Originally Posted by ecoli

Looks good Ed. Good to see it went to someone else who can compare this to one of the Campbell frames I built just like Jason did

!

The custom pan hard F/R, built-in steering servo, matched with a pair of spyder axles gets me all excited. The Delrin Skid Plates and side panels are done. Axles and transmission are in-bound but still looking for 1" wide 2.2. non-beadlock wheels for the michelin XL tires, THANKS!

Siggy · 08-12-2009, 05:33 PM

Name: Campbell.jpg
Views: 1043
Size: 40.4 KB

I made a set of red rings, delrin skid plate, and GTR shocks.
Have a pair of aluminum knucles for the rear and 2 sets of axle case on the way. And thinking if these would be suitable?

http://www.rc4wdstore.com/2/product_...roducts_id=315

AIPOHAKU · 08-13-2009, 12:30 AM

Im not digging the deep dish wheels for him bro..Id stick to whats on there or another more narrow set..Looks great now though!!!

Code454 · 08-13-2009, 12:33 AM

Quote:

Originally Posted by AIPOHAKU

Im not digging the deep dish wheels for him bro..Id stick to whats on there or another more narrow set..Looks great now though!!!

i agee

JJR · 08-27-2009, 09:40 AM

You did a good job.

I wish I could play with it.

DonsATV · 09-26-2009, 05:57 AM

Looks awesome!!!!

We need some Video!!!

Siggy · 10-07-2009, 12:53 AM

Name: campbell.jpg
Views: 968
Size: 53.0 KB

Here's an outdoor shot!

cruiserkb · 10-11-2009, 09:41 AM

This thing is evolving nicely. I like the direction that you are going with all of the upgrades.

Keep it UP!

Siggy · 03-13-2010, 02:06 AM

Name: Campbellengine.jpg
Views: 855
Size: 46.2 KB

Just got in the mail today a Pocher 1/8 scale engine. Measured thing up and it seem it might just fit.

05-13-2009, 08:29 PM	#121
1badxj Pebble Pounder Join Date: May 2008 Location: in the shop Posts: 155	This is my favorite large scale buggy for sure, Glad i found the build thread finally. Nice work

05-13-2009, 09:21 PM	#122
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	I got so frustrated with this buggy today I almost threw the damn thing in the lake. Bent a barrel nut and busted a rear lockout. Two separate incidents.

05-13-2009, 09:35 PM	#123
2JSC I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH Posts: 4,913	You are too hard on yo sh!t.

05-13-2009, 09:38 PM	#124
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	12lbs at speed across the rocks. I wasn't going easy on it. Also launched it off a 3 ft droop topped out in 2nd gear.

05-13-2009, 09:40 PM	#125
2JSC I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH Posts: 4,913	Lets see some carnage pics!

08-07-2009, 02:07 PM	#126
2JSC I wanna be Dave Join Date: May 2006 Location: FOUR 8 OH Posts: 4,913	You got quite a collection going there Ed. Rig looks as good as ever.

08-07-2009, 05:17 PM	#128
CrazyAce211 Newbie Join Date: Nov 2008 Location: Des Moines Posts: 39	What kind of axles are those?

08-08-2009, 09:23 AM	#130
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	Nice! Glad you're enjoying it!

08-10-2009, 01:18 PM	#131
ecoli I wanna be Dave Join Date: Jun 2007 Location: Canada, eh. Posts: 2,919	Looks good Ed. Good to see it went to someone else who can compare this to one of the Campbell frames I built just like Jason did !

08-12-2009, 05:33 PM	#133
Siggy RCC Addict Join Date: Apr 2008 Location: Singapore Posts: 1,742	I made a set of red rings, delrin skid plate, and GTR shocks. Have a pair of aluminum knucles for the rear and 2 sets of axle case on the way. And thinking if these would be suitable? http://www.rc4wdstore.com/2/product_...roducts_id=315

Sponsored Links

08-13-2009, 12:30 AM	#134
AIPOHAKU RCC Addict Join Date: Feb 2006 Location: Moku O Keawe Posts: 1,109	Im not digging the deep dish wheels for him bro..Id stick to whats on there or another more narrow set..Looks great now though!!!

08-27-2009, 09:40 AM	#136
JJR Quarry Creeper Join Date: May 2007 Location: Temecula, CA Posts: 284	You did a good job. I wish I could play with it.

09-26-2009, 05:57 AM	#137
DonsATV RCC Addict Join Date: Apr 2009 Location: United States of the Offended Posts: 1,184	Looks awesome!!!! We need some Video!!!

10-07-2009, 12:53 AM	#138
Siggy RCC Addict Join Date: Apr 2008 Location: Singapore Posts: 1,742	Here's an outdoor shot!

10-11-2009, 09:41 AM	#139
cruiserkb Rock Crawler Join Date: Jul 2008 Location: gilbert Posts: 613	This thing is evolving nicely. I like the direction that you are going with all of the upgrades. Keep it UP!

03-13-2010, 02:06 AM	#140
Siggy RCC Addict Join Date: Apr 2008 Location: Singapore Posts: 1,742	Just got in the mail today a Pocher 1/8 scale engine. Measured thing up and it seem it might just fit.

RCCrawler Forums

Thread: Project: Moon buggy