11-17-2008, 04:20 PM | #81 | |
RCC Addict Join Date: Jun 2006 Location: IN THE PIT !!
Posts: 1,039
| Quote:
LOOKS good !! thanks Redmike | |
Sponsored Links | |
11-17-2008, 04:30 PM | #82 | |
Newbie Join Date: Sep 2008 Location: Chambersburg
Posts: 49
| Quote:
Looks good man, any problems lining stuff up? All fit good? | |
11-17-2008, 04:58 PM | #83 |
Pebble Pounder Join Date: Oct 2004 Location: Southern Wisconsin
Posts: 187
| Everything bolted up just fine. Took me way longer trying to figure out how to make my electronics fit w/o being too much of an eyesore than it did just bolting up the MRC parts (my Mamba Micro Pro and Futaba 3ch Fasst Rx are probably a little larger that what some people run on their MRCs). I also redid my rear 4 link while I had it apart to better deal with torque twist. This rig is also my first attempt at droop suspension, so that's where most of my "fiddling" came in.
|
11-19-2008, 12:08 AM | #84 |
Newbie Join Date: Oct 2008 Location: italy
Posts: 5
|
IT,s arrived............very nice!!!!!!!!!!!!!!!!!!!!!!!
|
11-19-2008, 11:39 AM | #85 |
Quarry Creeper Join Date: Oct 2008 Location: Folsom
Posts: 215
|
Mine just came in as well... I will take photos of it when it is completed.. Waiting for the new motor to come in as well. Thanks again Jerry for the wonderful products that you produce to your fellow crawlers... J :-P:-P:-P:-P:-P:-P:-P:-P:-P:-P:-P |
11-19-2008, 07:13 PM | #86 | |
RCC Addict Join Date: Jun 2006 Location: IN THE PIT !!
Posts: 1,039
| thanks Fabio ,good to here!! Quote:
& something NEW coming to the DmG. THE Nat,V2 "TVP" style "tuber chassis" along with the soon to be released "SNIPE" chassis | |
11-19-2008, 07:37 PM | #87 |
Newbie Join Date: Apr 2007 Location: Marshalls Creek
Posts: 48
|
Zorlac did you get my pm?
|
11-19-2008, 08:38 PM | #88 |
Pebble Pounder Join Date: Oct 2004 Location: Southern Wisconsin
Posts: 187
| Droop+Nat=good times
Finally got my droop set up so I'm really happy with it. I'm using the stock shock bodies until the Losi ones come out and some small internal springs I picked up from my local Ace Hardware. I know mainly these have only been shown with mini-t or mini LST type shocks, but I just wanted to let everyone know that in my humble opinion these little guys work sweet drooped too. This is my first experience with a droop setup, and I admit I am by no means an expert, but I am still able to clear the same points I was able to before, and maybe even better in some spots due to lowering my CG and the way the front now drops to put the tires back in contact with the ground. Just wanted to put in my 2 cents for anyone wondering about droop+Nats and throw up a few more pics |
11-19-2008, 10:26 PM | #89 |
I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|
Looking good Red I run droop in my Hustler Super and I really dig it. If my Losi Mini Late Model shocks don't work out on my Nat, I'll hop on board with droop also. What size are the springs that you picked up? |
11-20-2008, 07:42 AM | #90 | |
Pebble Pounder Join Date: Oct 2004 Location: Southern Wisconsin
Posts: 187
| Quote:
Which I found through this thread by mann0mann: My Droop Setup - Lots of pics I ended up cutting the front springs fully in half, 2 coils or so off the right rear, and 4 or so off the left. I also took the small spacers from inside the stock shocks and used it on the outside of the shock to put my "drooped" stance a little higher. | |
11-24-2008, 07:08 PM | #91 |
Newbie Join Date: Nov 2008 Location: seattle
Posts: 4
| the nat chassis
i would like to buy one of those chassis from you is there a web site ?
|
11-24-2008, 07:20 PM | #92 | |
I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
| Quote:
Zorlac is his user name, just go back to the first post in this thread | |
11-24-2008, 09:15 PM | #93 |
Quarry Creeper Join Date: Oct 2008 Location: Folsom
Posts: 215
|
Cant say thank you enough for the tube chassis.. What a difference.. Here are a couple pics nothing special will upload more and make new thread for them... Then after install of electrical.. Not done yet but we shall see... Thank you again Zorlac... Cant wait to see what you come up with next for these little rigs.. Something like the Aluminit 2.2 chassis would look cool.. I will be more then happy to test it for you... lol Thanks again |
11-24-2008, 11:15 PM | #94 |
RCC Addict Join Date: Jun 2006 Location: IN THE PIT !!
Posts: 1,039
| NATT builds just a note on the chassis builds i have a been getting lot of Pm's on building NAT chassis !! thank you everyone right now the DmG is doing a run of the SNIPE chassis. hopefully i will be doing another run of the NAT in a few weeks. just a one man show here at the DmG & there are only so many chassis i can build at once. so hang in there & i will be getting to the NAT build run soon thanks zORLAc starting to see a lot of cool built up Nat's out there !! good job ,guys |
01-08-2009, 11:16 PM | #95 |
I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
| Shadow Class Nat
Diggin' the chassis Jerry... Last edited by CreepyCrawl; 01-08-2009 at 11:41 PM. |
01-19-2009, 08:21 AM | #96 |
Quarry Creeper Join Date: Dec 2007 Location: Blue Jay
Posts: 210
|
Man these chassis are SICK! I think this'll be one of the first things I buy once I get my hands on my MRC. Scott |
| |