RCCrawler Forums

JeremyH · 08-25-2011, 07:26 AM

Quote:

Originally Posted by papabash

Very different, I'd say. I was excited about Dlux's parts until I found out that they addressed a different problem from mine. I do not want to run the LCC parts at this time.
These, however, will fit the bill perfectly, plus they can be used front and rear. I really hope these make it to production. I need 2 sets to start with.

I am not trying to bring up a "who came first" argument....just to make a clarification on the Dlux link mounts. The should have no problem being used without the clocking ring (and LCC parts) and should work just fine in the rear. Just like Don's products, they will simply need to be drilled and have a bolt run through them to the axle.

BTW, very nice work as usual Don! Sorry that your thread got a bit off topic...

billet works · 08-25-2011, 12:21 PM

No worries...Erik and I are good.

Charlie-III · 08-25-2011, 01:35 PM

Quote:

Originally Posted by doors4u

It'll never work.

You sound like scatterbrains.......

Links look good. Are you doing button heads or flat heads? I would think countersunk with flatheads would be better (but sucky little allen wrenches.....

)

donzx12 · 08-25-2011, 02:46 PM

i just want one of those chassies sss-r. when will they b ready

kwonchoba · 08-25-2011, 06:20 PM

So I dont see these on your site yet. Do you know when they will be ready to buy? Id like to get 4 of them for my L trail chasis. Need asap

billet works · 08-25-2011, 06:51 PM

Shooting for early next week

kwonchoba · 08-25-2011, 06:58 PM

good deal!

BuckImod · 08-26-2011, 10:01 AM

I got my package from Don Today. He hooked me up with all the latest goodies. I couldn't stand the suspense of waiting until I got home from work to check it out. I stopped by the post office and got it before they could deliver it to the house. I got the new chassis complete with new electronics trays,aluminum servo mount,new redesigned rear 4-link plate,and the new shock/link axle mounts. Now I got to get home and get it built.

Thanks Don for the nice stuff.

billet works · 08-26-2011, 10:17 AM

Quote:

Originally Posted by BuckImod

I got my package from Don Today...blah blah blah.

Thanks Don for the nice stuff.

This post was useless without pics!

akguanja · 08-26-2011, 10:33 AM

Quote:

Originally Posted by billet works

This post was useless without pics!

Don, I need those MRC shock/link mounts asap for a current build, need someone to test them out before you do a final run?

BuckImod · 08-26-2011, 12:13 PM

Quote:

Originally Posted by billet works

This post was useless without pics!

Coming Soon!

ClassicGMJunkie · 08-26-2011, 12:31 PM

BuckI stopped by my shop with the box-o-goodies. is that chassis ready for bracing and lexan or is it gonna need a DUB topper to be legal ??

get it built B!

love the electronics plates Don! i bet it adds to the rigidity of the chassis overall. I would only be leery of changing to a smaller shock and not getting the articulation my mini wedge gives me..

papabash · 08-26-2011, 12:33 PM

Quote:

Originally Posted by BuckImod

Coming Soon!

Well get off here and get to work then! Hurry up, will ya?

papabash · 08-26-2011, 12:38 PM

Quote:

Originally Posted by ClassicGMJunkie

I would only be leery of changing to a smaller shock and not getting the articulation my mini wedge gives me..

That's the part I'm anxious to find out about.

neiloid1 · 08-26-2011, 04:56 PM

What are the new electronics trays they speak of? I've looked on all the pictures in this thread, the vendors section, BWD website and shop and can't see them - just the aluminum servo plate. Can someone enlighten me or get a build thread up asap?

BuckImod · 08-26-2011, 05:31 PM

Quote:

Originally Posted by neiloid1

What are the new electronics trays they speak of? I've looked on all the pictures in this thread, the vendors section, BWD website and shop and can't see them - just the aluminum servo plate. Can someone enlighten me or get a build thread up asap?

The chassis has 2 delrin trays for mounting electronics to. This is great,because the one thing I disliked about my old wedge was no room to mount anything. I just got home from work and getting started on it. I'll have some posted asap.

neiloid1 · 08-26-2011, 05:47 PM

Quote:

Originally Posted by BuckImod

The chassis has 2 delrin trays for mounting electronics to. This is great,because the one thing I disliked about my old wedge was no room to mount anything. I just got home from work and getting started on it. I'll have some posted asap.

Thanks for the quick reply. With you on that one, mounting the electronics is a little challenging in the wedge.

looking forward to your pics.

pixelnate · 08-27-2011, 07:16 PM

So do these mounts work on the rear axle?

-- Sent from my Palm Pre using Forums

BuckImod · 08-28-2011, 07:45 AM

Quote:

Originally Posted by pixelnate

So do these mounts work on the rear axle?

-- Sent from my Palm Pre using Forums

Yes they do. He makes 2 versions,one for aluminum lockouts,and one for the stock plastic ones.

brazwewn · 08-28-2011, 09:21 AM

Can the MRC to LCC knuckle mod be used with this

Wes

08-25-2011, 12:21 PM	#42
billet works I wanna be Dave Join Date: Jun 2007 Location: Earth Posts: 2,488	No worries...Erik and I are good.

08-25-2011, 02:46 PM	#44
donzx12 RCC Addict Join Date: Oct 2008 Location: 209 Posts: 1,371	i just want one of those chassies sss-r. when will they b ready

08-25-2011, 06:20 PM	#45
kwonchoba Quarry Creeper Join Date: Feb 2010 Location: New London, PA Posts: 226	So I dont see these on your site yet. Do you know when they will be ready to buy? Id like to get 4 of them for my L trail chasis. Need asap

08-25-2011, 06:51 PM	#46
billet works I wanna be Dave Join Date: Jun 2007 Location: Earth Posts: 2,488	Shooting for early next week

08-25-2011, 06:58 PM	#47
kwonchoba Quarry Creeper Join Date: Feb 2010 Location: New London, PA Posts: 226	good deal!

08-26-2011, 10:01 AM	#48
BuckImod Rock Crawler Join Date: May 2009 Location: Bellaire Posts: 743	I got my package from Don Today. He hooked me up with all the latest goodies. I couldn't stand the suspense of waiting until I got home from work to check it out. I stopped by the post office and got it before they could deliver it to the house. I got the new chassis complete with new electronics trays,aluminum servo mount,new redesigned rear 4-link plate,and the new shock/link axle mounts. Now I got to get home and get it built. Thanks Don for the nice stuff.

08-26-2011, 12:31 PM	#52
ClassicGMJunkie Quarry Creeper Join Date: Jun 2010 Location: Wheeling Posts: 454	BuckI stopped by my shop with the box-o-goodies. is that chassis ready for bracing and lexan or is it gonna need a DUB topper to be legal ?? get it built B! love the electronics plates Don! i bet it adds to the rigidity of the chassis overall. I would only be leery of changing to a smaller shock and not getting the articulation my mini wedge gives me..

08-26-2011, 04:56 PM	#55
neiloid1 Quarry Creeper Join Date: Apr 2009 Location: Hampshire, UK Posts: 396	What are the new electronics trays they speak of? I've looked on all the pictures in this thread, the vendors section, BWD website and shop and can't see them - just the aluminum servo plate. Can someone enlighten me or get a build thread up asap?

08-27-2011, 07:16 PM	#58
pixelnate Quarry Creeper Join Date: Mar 2011 Location: Universal City, TX Posts: 408	So do these mounts work on the rear axle? -- Sent from my Palm Pre using Forums

08-28-2011, 09:21 AM	#60
brazwewn RCC Addict Join Date: Mar 2010 Location: Alburtis Posts: 1,227	Can the MRC to LCC knuckle mod be used with this Wes

Sponsored Links

RCCrawler Forums

Thread: BWD's New MRC Bomb Proof Shock/Lower Link Axle Mounts