MGH Mini Growth Hormone

[tybalt6691]

So a few weeks ago I found a pro roller for 115 at my local ht. Since then I decided I would make it a bashed and....

7000 kv Horizon cheapo brush less combo

Jun Fac 11mm wheel wideners

No name aluminium 1.9 bead locks with 3 oz up front each wheel and 1.5 oz each rear wheel.

Biggest 1.9 tires I could find +Rock Lok+

Hot racing aluminium c hubs

Hot racing aluminum knuckles

Traxxas 5070 servo

Powered by 800 mah 3s lipo

I'm thinking about a roll cage of some sort next. Lmk what you think.

Now the pron









Sent from my ADR6425LVW using Tapatalk 2

[tybalt6691]

In the last two days the traxxas servo stripped and the 3racing elbow shaft up front stripped. Replaced servo with 645 mg hitec. Don't know what to do about elbow shaft.

Sent from my ADR6425LVW using Tapatalk 2

[hillbillyrc]

Originally Posted by tybalt6691

In the last two days the traxxas servo stripped and the 3racing elbow shaft up front stripped. Replaced servo with 645 mg hitec. Don't know what to do about elbow shaft.

Sent from my ADR6425LVW using Tapatalk 2

what is an elbow shaft? do you mean driveshaft?

[Hulldiver]

How are you liking the HR stuff? Good Fitment?

[tybalt6691]

had to tap the knuckles to 3mm.

Cv

Sent from my ADR6425LVW using Tapatalk 2

[lowridinjuggalo]

Originally Posted by hillbillyrc

what is an elbow shaft? do you mean driveshaft?

x2 what do u mean by "elbow shaft" ?

[tybalt6691]

CV

Sent from my ADR6425LVW using Tapatalk 2

[idk]

can u show me a better pic of the knuckles with the 3mm bolts? i just got a set and wanna see how its done

[tybalt6691]

Sure. But you just drill it then tap it for 3mm. Fairly easy.

Sent from my ADR6425LVW using Tapatalk 2

[hillbillyrc]

after you buy a drill bit and a tap i got mine at lhs for under $9.00

[tybalt6691]

Well the good guys over at TCScrawlers sent me a replacement set of the 3racing swing shafts (CV). They shipped on Tuesday and got them today. Can't beat that. Those guys are great.