New (to me) Rock Rey

[willyg1981]

The other massive difference to stability is a decent set of foam inserts from crawler creations “double deuce” @ 6” the stock foams are useless when turning at speed way too soft .


Sent from my iPhone using Tapatalk

[OpisOpus]

Originally Posted by willyg1981

The servo will be set at 6.4v I think it’ll say on the back of box but you can ramp it up to 7.5 as long as the rx will take it , it will say what output it can push through it on the rx casing in teeny tiny little letters and numbers , you might notice when you’ve been driving a while and trying to turn at full lock and it just stops this is what’s known as a “brown out” which when the servo is trying to draw a lot of power and there isn’t enough left in the battery for the motor and servo at that specific moment.


Sent from my iPhone using Tapatalk

Yea yours handles way better in terms of looking like it rolls less. I’ll have to mess with my shocks to see if I can get a better result. I have the PL shocks all around too, but the best setup I have requires a ton of preload which tells me the oil is too lightweight. I’ll try upping it maybe


Sent from my iPhone using Tapatalk

[OpisOpus]

Originally Posted by willyg1981

The other massive difference to stability is a decent set of foam inserts from crawler creations “double deuce” @ 6” the stock foams are useless when turning at speed way too soft .


Sent from my iPhone using Tapatalk

I have good tires and foams. Proline Hyrax 2.2 and the 2.2 duel stage foams


Sent from my iPhone using Tapatalk

[willyg1981]

Originally Posted by OpisOpus

I have good tires and foams. Proline Hyrax 2.2 and the 2.2 duel stage foams


Sent from my iPhone using Tapatalk

Sweet man , it’s just a case of driving it and finding the best for your style of driving , have fun
Man


Sent from my iPhone using Tapatalk