04-23-2019, 08:40 AM | #161 |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
Exactly, especially the smaller more true to scale 1/18 like the mini Gelande vs the old Losi mini. It looks like swapping the outter ends of these axles back to CR-24 or Barrage/RGT would make these perfect for all the 1/20 bodies available. Sent from my LGMP450 using Tapatalk |
Sponsored Links | |
04-23-2019, 08:46 AM | #162 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
It’d be feasible to swap just a single side/half shaft and have an offset pumpkin?
|
04-23-2019, 09:02 AM | #163 |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
Maybe if you made new link mounts, otherwise it wouldn't actually offset anyting. The actual difference in width isn't actually very much anyway. I'd say 2-3mm each side Sent from my LGMP450 using Tapatalk |
04-23-2019, 10:37 AM | #164 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
Ah ha.
|
04-27-2019, 09:38 AM | #165 |
Quarry Creeper Join Date: Aug 2018 Location: Toronto, Canada
Posts: 430
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
We are in for a real treat! |
04-27-2019, 09:51 AM | #166 |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
They mentioned these upgrades during talks about the upcoming 1/18, but I didn't think they'd announce it so soon. I'm told that higher turn motor may end up in the 1/18. I can't wait haha Sent from my LGMP450 using Tapatalk |
04-27-2019, 11:18 AM | #167 |
I wanna be Dave Join Date: Jul 2014 Location: Deep South
Posts: 3,444
| AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
I’d like a crack at that motor, too. Any estimated axle width for the 1/18? |
04-27-2019, 12:38 PM | #168 |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
I don't have numbers, but from the pictures you can tell where it's widened and how much. Looks like it's just a few MM each side which puts it around the 1/18 your 2 axles Sent from my LGMP450 using Tapatalk |
04-28-2019, 02:30 PM | #169 |
Pebble Pounder Join Date: Oct 2006 Location: Leaving black marks on Hwy 200
Posts: 129
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
After having run my CR-24 about 15 times over the last couple months I have nothing but good to say about it and that means a lot because I am extremely critical. Seeing the 1/18 pics on Facebook has me real excited. Will have get one for sure. These guys are killing it for the price point and hope they just grow with more options. Many other manufactures have lost their way as far as I am concerned.
|
04-28-2019, 02:57 PM | #170 |
Newbie Join Date: Apr 2019 Location: Chile
Posts: 6
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!!
Dear, I have a RGT 1/24 and I am very happy with it, but seeing the comments on the CR-24 in the forum I have been excited about that. I have several questions: 1- 1- One has a 030 engine and the other 050. Why this difference? which is better? 2- The gearboxes are different and are oriented in the opposite direction. Can you put a CR-24 transfer case to the RGT adventurer? 3- Could it be achieved only in transmitter in case of failure? but what radio / receiver / EXC do you suggest to replace it? Thank you. |
04-28-2019, 03:23 PM | #171 | |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!! Quote:
The 050 in the RGT/Barrage is just a longer version of the 030 used in almost every other micro crawler available. In theory it can make more torque, but the RGT/Barrage transmission doesn't have enough gear reduction. The CR-24 transmission and 030 motor gives more torque and better throttle control than the RGT with a longer 050. Yes the entire CR-24 transmission will bolt into the RGT/Barrage If you also use the CR-24 skid plate. As far as the electronics, stock replacements are cheap, but many people use the China 20amp ESCs like the XYS-BL20A. For a transmitter and receiver nearly any will do, but if you plan to run more than one RC and would like 3 channels or more I recommend the FlySky GT3B and GT3C Sent from my LGMP450 using Tapatalk | |
04-28-2019, 03:57 PM | #172 | |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!! Quote:
Sent from my LGMP450 using Tapatalk | |
04-28-2019, 04:17 PM | #173 | |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!! Quote:
First picture is the new axle from what I'll assume is called the CR-18, second is the CR-24 notice the space between the back of the Carrier hub and the clamp that holds it to the axle? In the second picture you'll see the CR-24 doesn't have that gap. The 3rd picture shows CR-24 axles compared to RC4WD 1/18 Mini Gelande 2 mini Yota 2 axles (which RC4WD oddly calls 1/24) The distance is already just a few mm difference, it looks like the new 1/18 axles will be very close. The last picture just points out the longer rear links and driveshaft, but also that the skid plate is forward biased. Sent from my LGMP450 using Tapatalk | |
04-30-2019, 05:12 PM | #174 | |
Newbie Join Date: Apr 2019 Location: Chile
Posts: 6
| Re: AsiaTees 1/24 Hobby Plus CR-24 & new 1/18th scale!! Quote:
| |
05-07-2019, 10:06 AM | #175 |
Quarry Creeper Join Date: Aug 2018 Location: Toronto, Canada
Posts: 430
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!!
Am I reading that correctly? 3 wire servo?? This opens up more options if the upgraded esc is 3 wire, right? |
05-19-2019, 08:01 AM | #176 |
Newbie Join Date: Mar 2019 Location: Cape Town
Posts: 6
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!!
Looks like we have a new contender: SCX 24 Deadbolt Would love to know how it goes vs the CR24... buut i have a feeling spoo76 is on it |
05-19-2019, 08:21 AM | #177 | |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!! Quote:
Sent from my LGMP450 using Tapatalk | |
05-19-2019, 08:37 AM | #178 | |
I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!! Quote:
It's probably going to be a popular vehicle in the micro scene just based on the Axial name and advertising power they have. Even if the performance was no better than the Trekker was the more scale C channel chassis and wheelbase 3mm longer than the Mini Gelande will open up some options for scale 1/24 bodies, however those huge tires will make then all look like monster trucks. The smaller Barrage/RGT, CR-24 wheels would probably look more scale. Even though I have one pre ordered I'm most excited about the upcoming CR-18. Widened CR-24 axles with a chassis that looks longer than the mini Gelande with some cool 1/18 bodies promised. IMO that setup with CR-24 axles or at least the more narrow knuckles and lockouts will also make for a great 1/20 chassis and both scales will look perfect with all the existing wheel and tire combos Sent from my LGMP450 using Tapatalk | |
05-23-2019, 09:49 PM | #179 |
Newbie Join Date: Mar 2019 Location: Cape Town
Posts: 6
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!!
After two months, the CR24's I ordered have finally arrived. I really thought I could use this Pajero body from a Fujimi kit in my stash - maybe with a bit of work... either the Fujimi is too small or the CR24 is a tad too big for a 1/24? |
05-23-2019, 11:38 PM | #180 |
Rock Crawler Join Date: Jun 2018 Location: Orange County, CA
Posts: 711
| Re: 1/24 HobbyPlus CR-24 & new 1/18th scale!!
^^^ 1/20 bodies fit that better. RGT has a silver Jeep like body that will fit. Good luck. Sent from my iPhone using Tapatalk |
1/24 HobbyPlus CR-24 & new 1/18th scale!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Asia’s Best RC shops? | labrathor | Outside the US | 5 | 12-29-2018 12:00 AM |
Shipping from Asia Tees! | phishead1101 | Chit Chat | 11 | 02-15-2016 05:25 PM |
Asia Tees | mudbeast2 | General Crawlers | 44 | 07-03-2015 06:45 AM |
New shocks from ASIA TEES? | heinie_21 | General Crawlers | 4 | 11-13-2012 11:57 PM |
| |