*******Bec Help*******

[trevely15]

Hey guy's, if you Esc turns your receiver on and with in a second turns it of.
Does that mean you need a bec to put more power into the receiver?. Because when i plug the Esc into the receiver it turns straight off.
And the Esc does have internal bec and thats whats i think has fried.

Thanks. Tom

[SMR 510RR]

The ESC does have an internal BEC (typically, there are some exceptions) although that may not be what is causing you problems. Post up the details on all of your electronics, that will help us figure it out.

[Charlie-III]

Originally Posted by SMR 510RR

The ESC does have an internal BEC (typically, there are some exceptions) although that may not be what is causing you problems. Post up the details on all of your electronics, that will help us figure it out.

+1.

Your RX draws almost no power, so either you have another issue or the internal ESC BEC is dieing.
Maybe try unplugging the steering servo and then try powering up the RX, maybe the servo is failing and drawing too much power.