04-24-2009, 09:21 AM | #101 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
| good gear ratio for brushless
so since I finally got my lipo what's a good gear ratio for brushless and lipo cuz if I run 16p-86,90s it runs like a tird but if I go 20p-86s its a wheely machine... can anyone help out? please and thanks
|
Sponsored Links | |
04-24-2009, 08:58 PM | #102 |
Newbie Join Date: Nov 2008 Location: Midland
Posts: 4
|
what brushless motor you got ?
|
04-24-2009, 10:06 PM | #103 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
| what im running
im running castle creations sidewinder speed control with traxxas vxl motor witch is 3500kv lol pure insaine from that 8cell to this 2cell its like night and day and Im loving every min of it venom 5000mah 20c
|
04-25-2009, 01:03 AM | #104 |
Quarry Creeper Join Date: Nov 2006 Location: out in boonies!!
Posts: 349
|
nick- gotta stand now huh ? i should be there sunday . tim- if i recall right my last slash ran good on stock(18p/86s) with vxl on 2s. just enough power/speed . mike- i got 25spline futaba saver and did trans/camber so slash handles great.plus got my hyper7 back and put .28 axial in(was in savage til blew trans). and of course i did'nt forget bout crawling--i got a scx10 frame set. time to bogie boys! |
04-25-2009, 05:22 AM | #105 |
Quarry Creeper Join Date: Feb 2008 Location: Bay City
Posts: 340
|
Sounds Good guys! Me and chris and the girls are heading to freeland for the walleye festival today. going to looks for some good curb gold. |
04-25-2009, 07:00 AM | #106 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
| thanks
thanks pat ill try that today after work and do some other stuff see u guys tomorrow
|
04-25-2009, 08:19 AM | #107 |
Quarry Creeper Join Date: Mar 2005 Location: THE WAING
Posts: 323
|
Well blew up 2 motor's in the slash lastnight so don't know if i can run or not
|
04-25-2009, 08:52 AM | #108 |
Newbie Join Date: Nov 2008 Location: Midland
Posts: 4
|
Tim, I was thinking 16/86 and run for 2 minutes and watch motor temp - dont let it get any higher than 150 deg. Or, do the 3 second rule - if you can't hold on to motor for 3 seconds - its too hot. If its too hot, go down 1 or 2 teeth on pinion. |
04-25-2009, 08:54 AM | #109 |
Newbie Join Date: Nov 2008 Location: Midland
Posts: 4
|
Jay - what you running for pinion - for stock motor and ESC and spur (86t) don't go any higher than 20 tooth pinion. Don't run on 3 cell li-po. Don't run on 8 cell NiMh. You running stock motor ?? I have a used stock motor for ya if you stop by. I'll make you a deal. Last edited by harleymon; 04-25-2009 at 09:00 AM. |
04-25-2009, 10:38 AM | #110 |
Quarry Creeper Join Date: Feb 2008 Location: Bay City
Posts: 340
|
Jay with the 540 motors use a 15/83 or if ya dont got that run a 14/86 that the best combos I've found |
04-25-2009, 11:00 AM | #111 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
| thanks for the tip
thanks mike ill try that out to I may have to run to rogers after work and pick up a 14 or 15 tooth pinon just in case!!!!
|
04-25-2009, 01:35 PM | #112 |
Quarry Creeper Join Date: Feb 2008 Location: Bay City
Posts: 340
|
Well the track dried up great today! there was no water on it until about 15 mins ago. man were getting some major rain right now. So depending how much rain we get tonight ya might want to bring the crawlers also.
|
04-25-2009, 03:02 PM | #113 |
Quarry Creeper Join Date: Mar 2005 Location: THE WAING
Posts: 323
|
im running a 14/86 motor was just old the other slash has a 12t with the same gear and melted the spur it got so hot |
04-25-2009, 03:45 PM | #114 |
Quarry Creeper Join Date: Feb 2008 Location: Bay City
Posts: 340
|
Well guys it aint lookin to hot for running slashes tomorrow Theres alot of water on the track!
|
04-25-2009, 04:00 PM | #115 |
Newbie Join Date: Nov 2008 Location: Midland
Posts: 4
| |
04-25-2009, 04:13 PM | #116 |
Quarry Creeper Join Date: Aug 2008 Location: Northern, Mi
Posts: 324
|
We can always set up something in the front yard again. |
04-25-2009, 04:41 PM | #117 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
| lmfao
lol does anyone have any micro-t's or micro-dt'"???
|
04-25-2009, 05:09 PM | #118 |
Newbie Join Date: Nov 2008 Location: Midland
Posts: 4
|
there was a time..............
|
04-25-2009, 05:52 PM | #119 |
Newbie Join Date: Sep 2008 Location: Bay City
Posts: 4
|
I just traded the TC5 for an SC10. Soon we can compare them with Slashes. |
04-25-2009, 05:53 PM | #120 |
Quarry Creeper Join Date: Aug 2008 Location: Northern, Mi
Posts: 324
| |
| |