Exceed Mad Torque Super Build

[motoj550]

Originally Posted by rockcarver66

Can anyone tell me what the pitch is for the gearing? I want to replace the stock pinions and haven't found out what pitch to buy. Any info would be helpful. Thanks

48p, thats what i bought and they are working fine, someone on this form bought 32p and it was not right so they said they bought the 48p and it worked (thanks whoever you was for that info).

[motoj550]

Well it's time for a chassis rebuild, took a tumble down my 7ft wall in my course the other day. it broke the lower corner of my chassis off where the lower rear link mounts up. So i bought a turbo tech super chassis off of TURBOFEST in the for sell section, (thanks turbofest, really nice chassis). I will be posting step by step of my rebuild soon.

[motoj550]

got the chassis and axles ready for the rebuild. Time to make the links. Gonna start out with 17.25" wheelbase.

[motoj550]

Got the rear links done, made them out of 5/16" cutting board and using traxxas rod ends.

[motoj550]

Front links done now.

[motoj550]

Front and rear upper links done. Got me a set of traxxas revo shocks for this setup because of the length and my son has a set of these on his slingshot chassis ax10 and these shocks are smooth as hell and don't leak a bit. Had to do the traxxas rod end mod to make clearance for the cap in the lower shock mounts.

[motoj550]

Got all the electronics in and servos are wired straight to the BEC. Just need to get one of my old XR10 bodies mounted up, seen another guy running xr10 body on his super and looked pretty cool.

[Jslick]

Well done so far, you will like the Turbotech Chassis. It is a solid winning platform.

[motoj550]

Got my old XR10 body all mounted up and went for a teat drive, man this thing works awesome. the TURBOTECH chassis and the traxxas revo shocks work perfect together, it has just the right amount of flex. When i get a chance i'll get some action shots.

[Hittman]

That looks really good man. Do you happen to have a flex shot?

[motoj550]

Originally Posted by Hittman

That looks really good man. Do you happen to have a flex shot?

Here ya go Hittman, the flex shots ya wanted.

[Hittman]

Uhhhh, Thx????

Haha, jk man. That thing has pleanty of flex. Very nice! Thanks bro

[XtrmTJ]

That is one HE**... Jimdandy of a course you got there, beats the heck put of my pile of rocks (lol).
Smitty
BTW, what do you use to cut your cutting board with ?

[motoj550]

Originally Posted by XtrmTJ

That is one HE**... Jimdandy of a course you got there, beats the heck put of my pile of rocks (lol).
Smitty
BTW, what do you use to cut your cutting board with ?

i used a jig saw with i think about a 14 tooth blade, too high number blade makes it want to melt.

[Tgreer]

How well does the twin 645mg servos work? Do they give enough grunt to turn the wheels with some force on them?

[motoj550]

Originally Posted by Tgreer

How well does the twin 645mg servos work? Do they give enough grunt to turn the wheels with some force on them?

there not to bad but they still don't compare to a hitec 7950, i'd say they work about as good as a single 225 to 250 oz servo.

[Tgreer]

I think I'm going to get one of these exceeds and run a servo from hobby king that is rated at 300oz and about .13sec I will run dual front and rear on them, they cost about $36 a peice. I have a 7950 for both my pro and sporty and it is awsome, but it's also $115, so I want to see if this route will do it!

[mercury]

where can i buy this chassis

[motoj550]

Don't think you can get them any more, keep looking classifieds. RC4WD also has 1 like it here: Frankenstein Super Bully Chassis System w/links