RCCrawler Forums

run2jeepn · 11-08-2008, 05:38 AM

Let me know how those Hex's hold up... This is going to save me $$$$

JeremyH · 11-08-2008, 05:53 AM

Will do! I cant wait to test out the new setup!

chris_dishmon · 11-08-2008, 08:08 AM

Quote:

Originally Posted by Mayhem Eng.

Looks good, We still have the prog. to make this wheel. I think I have a set of 14mm spiders sitting on the shelf. If we can help let me know.

good to hear. i'll be looking you up come tax time.

JeremyH · 05-21-2009, 09:30 AM

Ok....it's well known around these parts that I suck with the stick radio, so I decided to do something about that:

...and all I've got to say is....the PunkRC Dig Switch is AWESOME! Here's a short video that I shot in my backyard course:

(Press the HD button and let the vid load fully before you press play)
PunkRC Dig Switch

Next, I will be working on getting more steering out of this thing.

JeremyH · 05-21-2009, 09:33 AM

BTW, Jarod, the hexes are holding up just fine!

TIMZKRAWLER · 05-22-2009, 09:59 PM

Great looking rig....love the tires .....are they cut in 3 sections of the badlands to make 1 tire??....and would i start with 6 of the badlands to make the 4 tires??...thanks for the help

JeremyH · 05-23-2009, 05:36 PM

Nope....those Molands use two sets (a total of 4 tires) of Maxx sized Badlands and two sets (a total of 4 tires) Moab sidewalls.

Thanks for the compliments!

TIMZKRAWLER · 05-23-2009, 06:25 PM

AHHHHHH...ok,I didn't even think about maxx size tires ......thanks for the help

Quote:

Originally Posted by JeremyH

Nope....those Molands use two sets (a total of 4 tires) of Maxx sized Badlands and two sets (a total of 4 tires) Moab sidewalls.

Thanks for the compliments!

JeremyH · 05-24-2009, 08:41 AM

Quote:

Originally Posted by TIMZKRAWLER

AHHHHHH...ok,I didn't even think about maxx size tires ......thanks for the help

No problem.

BTW, I've switched to a set of Chisels with Crwlr1 foams inside them. I'll be testing this setup out this week...

JeremyH · 06-02-2009, 06:42 AM

Made a few changes:
(new body....yes, looks just like the old one; new tires and foams)

(Slippage)

It has been performing quite well. It climbs vertical ledges like a champ! I still haven't decided on the tires. The Panthers perform well, but just dont provide the height that is needed with these Clod diffs.

Anyway, here is a short video:
(for the best quality, click the HD button and let it load fully before you press play)
http://www.youtube.com/watch?v=ILsqOvwNhi8

bigflex · 06-02-2009, 12:43 PM

looking good. The only thing that would make it a little nicer would be a set of miniclod axles.

JeremyH · 06-02-2009, 12:47 PM

Very true.....but Grizz isnt making them right now....

JeremyH · 06-11-2009, 10:14 PM

Well, those Panthers just arent giving the diff clearance that this truck needs, so here is my new setup (well, the rear is finished anyway):
(RC4WD X-Locks with some chopped up Crwlr1 6" foams)

Oh, and I added a pinstripe!

JeremyH · 07-02-2013, 01:18 PM

Hopefully I am allowed to post in my own thread without receiving an infraction........

Quote:

Originally Posted by adamargue

I have a few sets of clod axles at home and have been trying to figure out what to do with them. Browsing these threads have given me some good ideas.

Quote:

Originally Posted by Grizzly4x4

I still have several sets of Clod axles and mini-clods axle kits I have thought about dusting off. My 2.2 class mini-clod is still mostly intact and I still have a Clod super sitting on the shelf also.
It's too bad the Clods suffer from that huge gear that kills ground clearance.

Welcome back to the comp scene....glad to see I inspired you guys.

Quote:

Originally Posted by adamargue

We need a clod class lol

We have the perfect class for them.....2.2pro (or super if you're into a bigger tire).

ROWDY RACING · 07-02-2013, 01:19 PM

Bump

JeremyH · 07-02-2013, 01:21 PM

Quote:

Originally Posted by rowdy racing

bump

You are not allowed to post in my thread!!

INFRACTION!!

ROWDY RACING · 07-02-2013, 01:23 PM

Still got this dinosaur?

JeremyH · 07-02-2013, 01:23 PM

Yep. It's a tad bigger now though.....

It "looks cool", donut?

ROWDY RACING · 07-02-2013, 01:26 PM

I wish comp rigs still looked like that.

JeremyH · 07-02-2013, 01:27 PM

Mine still does...

06-02-2009, 06:42 AM	#70
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Made a few changes: (new body....yes, looks just like the old one; new tires and foams) (Slippage) It has been performing quite well. It climbs vertical ledges like a champ! I still haven't decided on the tires. The Panthers perform well, but just dont provide the height that is needed with these Clod diffs. Anyway, here is a short video: (for the best quality, click the HD button and let it load fully before you press play) http://www.youtube.com/watch?v=ILsqOvwNhi8 Last edited by JeremyH; 06-02-2009 at 06:46 AM.

07-02-2013, 01:19 PM	#75
ROWDY RACING I wanna be Dave Join Date: Dec 2009 Location: . Posts: 7,967	Re: New Build Bump

07-02-2013, 01:23 PM	#77
ROWDY RACING I wanna be Dave Join Date: Dec 2009 Location: . Posts: 7,967	Re: New Build Still got this dinosaur?

07-02-2013, 01:23 PM	#78
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Re: New Build Yep. It's a tad bigger now though..... It "looks cool", donut?

07-02-2013, 01:26 PM	#79
ROWDY RACING I wanna be Dave Join Date: Dec 2009 Location: . Posts: 7,967	Re: New Build I wish comp rigs still looked like that.

11-08-2008, 05:38 AM	#61
run2jeepn I wanna be Dave Join Date: Sep 2005 Location: USA Posts: 11,196	Let me know how those Hex's hold up... This is going to save me $$$$

11-08-2008, 05:53 AM	#62
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Will do! I cant wait to test out the new setup!

05-21-2009, 09:30 AM	#64
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Ok....it's well known around these parts that I suck with the stick radio, so I decided to do something about that: ...and all I've got to say is....the PunkRC Dig Switch is AWESOME! Here's a short video that I shot in my backyard course: (Press the HD button and let the vid load fully before you press play) PunkRC Dig Switch Next, I will be working on getting more steering out of this thing.

05-21-2009, 09:33 AM	#65
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	BTW, Jarod, the hexes are holding up just fine!

05-22-2009, 09:59 PM	#66
TIMZKRAWLER Rock Crawler Join Date: Apr 2007 Location: APPLE VALLEY,CALIFORNIA Posts: 985	Great looking rig....love the tires .....are they cut in 3 sections of the badlands to make 1 tire??....and would i start with 6 of the badlands to make the 4 tires??...thanks for the help

05-23-2009, 05:36 PM	#67
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Nope....those Molands use two sets (a total of 4 tires) of Maxx sized Badlands and two sets (a total of 4 tires) Moab sidewalls. Thanks for the compliments!

06-02-2009, 12:43 PM	#71
bigflex I wanna be Dave Join Date: Jun 2005 Location: drillin Holes for the man Posts: 2,736	looking good. The only thing that would make it a little nicer would be a set of miniclod axles.

06-02-2009, 12:47 PM	#72
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Very true.....but Grizz isnt making them right now....

06-11-2009, 10:14 PM	#73
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Well, those Panthers just arent giving the diff clearance that this truck needs, so here is my new setup (well, the rear is finished anyway): (RC4WD X-Locks with some chopped up Crwlr1 6" foams) Oh, and I added a pinstripe!

07-02-2013, 01:27 PM	#80
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Re: New Build Mine still does...

Sponsored Links

RCCrawler Forums

Thread: New Build