My 2013 Losi Sporty

[JENS]

Originally Posted by Weiße

Hi,
your Losi is awesome, very nice build. Im admire your Thread and the Losi for a long time, thats a awesome thread and your Losi shafty is beautiful.

Best Regards,
Randy.

Thanks !

[dentonmac]

Got to give the JENS mod a thumbs up. Even with a 16t pinion (which I was thinking was too large) I had way more speed and low end than anyone else at the comp today with only a 17.5 and 3s. And there were some high zoot, top of the line stuff being run. I also got in some binds that made people cringe, powered though like a champ.

It ran great, I didn't on the other hand.

[TSK]

Man, that is a Beast of a motor in that Sucker!

[JENS]

Ready for Nordics in Finland

[braune]

Hi JENS,

good luck at the Nordics

Nice to see a Parma on your crawler, too

Can you please take a pic of your skidplate of the Suckerpunch?

Regards,
Jeffrey

[Weiße]

Awesome, good luck at the Nordics
Best Regards

[JENS]

Originally Posted by braune

Hi JENS,

good luck at the Nordics

Nice to see a Parma on your crawler, too

Can you please take a pic of your skidplate of the Suckerpunch?


Regards,
Jeffrey

Thanks

Skidplate :

Originally Posted by Weiße

Awesome, good luck at the Nordics
Best Regards

Thanks


.

[JENS]

After Nordics I will give this motor a try :




Team Brood Axle Buster 25t


.

[braune]

Originally Posted by JENS

Thanks

Skidplate :





Thanks


.

Thanks for the picture :-)

Gesendet von meinem GT-S5570 mit Tapatalk 2

[dentonmac]

Originally Posted by JENS

After Nordics I will give this motor a try :




Team Brood Axle Buster 25t


.

Interested to hear your take on that motor. With the tranny mod I am thinking or trying out a brushed motor since our season is over.

[WAM]

I went from a Tekin brushless to a 25T Axle Buster. I think your going to like it. Particularly it's smooth, barely creeping downhill ability. Plus excellent pop when needed. Only downside is I think it's a bit heavy.

[JENS]

Well,-back from Nordics i Finland Really nice location,people and courses

The Losi drove very good,-but the driver did not
First two courses went well with a -30 and a -29 score (Ten gates and two -5 bonus-gates per course)
Course four a not so bad -19 ,-but course three a hit and miss -3 score....

Managed to get to the final,-but messed up and ended ninth...,-a bit disappointet,-but stupid driving and not going for bonus-gates (which were -10 in the finals) is not the way to do it Only my self to blame !

But it was a very nice trip to Finland with great company from Norway,meeting a lot of skilled european drivers and just having a great time

[JENS]

Originally Posted by WAM

I went from a Tekin brushless to a 25T Axle Buster. I think your going to like it. Particularly it's smooth, barely creeping downhill ability. Plus excellent pop when needed. Only downside is I think it's a bit heavy.

Yes it is heavy,-but if it is as good as I think,-it will be worth the extra weight
Thinking about using the Holmes BR Mini,-hoping it will handle the current....

[braune]

Originally Posted by JENS

Well,-back from Nordics i Finland Really nice location,people and courses

The Losi drove very good,-but the driver did not
First two courses went well with a -30 and a -29 score (Ten gates and two -5 bonus-gates per course)
Course four a not so bad -19 ,-but course three a hit and miss -3 score....

Managed to get to the final,-but messed up and ended ninth...,-a bit disappointet,-but stupid driving and not going for bonus-gates (which were -10 in the finals) is not the way to do it Only my self to blame !

But it was a very nice trip to Finland with great company from Norway,meeting a lot of skilled european drivers and just having a great time

Congrats to 9th placement
You did the same mistake as I did at SC, I wasn't driving ALL the bonuse gates

[Weiße]

Congrats to the 9 place, very nice....
Best Regards

[JENS]

Originally Posted by braune

Congrats to 9th placement
You did the same mistake as I did at SC, I wasn't driving ALL the bonuse gates

Originally Posted by Weiße

Congrats to the 9 place, very nice....
Best Regards

Thanks !


.

[WAM]

Originally Posted by JENS

Yes it is heavy,-but if it is as good as I think,-it will be worth the extra weight
Thinking about using the Holmes BR Mini,-hoping it will handle the current....

I'm using the BR Mini AND 4S. For maybe a year (ish) now. Be sure to turn off the dragbrake and Holmes Hold. Check status on software. It doesn't always ship with latest. You update and do all your programing with a Castle Link. And remember it has no useful BEC. I lash mine down on an open cantilevered tongue between the front links to get maximum cooling. No tape, sleeving or shrink wrap/tubing for me.

[dentonmac]

Originally Posted by JENS

Yes it is heavy,-but if it is as good as I think,-it will be worth the extra weight
Thinking about using the Holmes BR Mini,-hoping it will handle the current....

That really surprises me about the weight. Is that just motor vs motor, or is that overall weight (with extra wires and larger sensored ESC for brushless)?

Great job at Nordics.

[JENS]

Thanks

The Axle Buster is heavier than the ROC,-motor vs. motor.

[WAM]

Big heavy magnets