-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Codyboy Rebuilds His TRX4 "BULLDOG"
- Thread starter CODYBOY
- Start date
Itali83
RCC Addict
Great thread ernie! Beautiful work on the weights. Don't even own one of these trucks but I'm sucked into this thread. Keep it up.
Ben
Ben
wrightcs77
RCC Addict
Message exocaged on here. He is the one who made the YouTube videos.Turnigy GTX3 hacked just like the Flysky GT3b... aside from swanky curved outer case it is the same radio. I did it at the same time as I hacked my friends Flysky. Now I am just working on figuring out the cryptic menu.(along with what to do with all these freakin extra 40pin header strips... 20x40 pin strips.. used 2 sections of 4 each heh)
Sent from my Pixel XL using Tapatalk
Thanks for the info Case, he does a great job walking you through each step!"thumbsup"
Ernie
I just wanted to comment on a action a moderator took on here just recently.
A member had started a thread about sharing info for building up grades for the TRX-4, which I think was a great thread! Very informative and he has some great ideas as well as the ideas of those who shared their info. Well, it was removed because the person broke the rules about mentioning sales of a product in his thread. Should the whole thread have been deleted, in my opinion I don't think so, but it was. In all fairness to the few mods that donate their time to trying to keep this site running smooth, rules are rules. The way this person worded his post was a indication that he knew he was crossing a very thin line, and at the time I thought he shouldn't have done that!
So a word of advise for those who have a product that maybe would help your TRX-4 buddies, buy a venders star! $100 is not a bad deal. I'm retired, I don't have a venders store on here, so my products here and in the ascender section are sold by word of mouth advertisement. In the last two years I have paid for my blue star 300 fold just with 4 or 5 products.
Having said that I hope the mods will see fit to restore the portion of the thread that wasn't breaking the rules, it was very helpful! "thumbsup"
Ernie
A member had started a thread about sharing info for building up grades for the TRX-4, which I think was a great thread! Very informative and he has some great ideas as well as the ideas of those who shared their info. Well, it was removed because the person broke the rules about mentioning sales of a product in his thread. Should the whole thread have been deleted, in my opinion I don't think so, but it was. In all fairness to the few mods that donate their time to trying to keep this site running smooth, rules are rules. The way this person worded his post was a indication that he knew he was crossing a very thin line, and at the time I thought he shouldn't have done that!
So a word of advise for those who have a product that maybe would help your TRX-4 buddies, buy a venders star! $100 is not a bad deal. I'm retired, I don't have a venders store on here, so my products here and in the ascender section are sold by word of mouth advertisement. In the last two years I have paid for my blue star 300 fold just with 4 or 5 products.
Having said that I hope the mods will see fit to restore the portion of the thread that wasn't breaking the rules, it was very helpful! "thumbsup"
Ernie
Mudflap84
Pebble Pounder
I really love this thread Codyboy;have I told you lately 8)? Where can I find those inserts and a quality fastener assortment? Great hack on the shift servo :mrgreen:
Thank you for the kind words young man!!
Here you go.
https://www.mcmaster.com/#catalog/94510A030
After your in McMasters, type in Stainless steel screws to find different fasteners sizes "thumbsup"
Ernie
So I've had a chance to run the portal weights for a while now along with the SSD d-hole wheels that clear them. The wheels they replaced were quite a bit heavier (2 lbs for all 4), but I had gotten to a point where I'd added all the weight it needed or a bit too much maybe. So the lighter wheels along with sticking weight where its needed was a welcome improvement, I'm quite pleased with its performance.
Yeah I was in denial of the laws of physics a bit, though it is an easy way to add weight down low.
Mudflap84
Pebble Pounder
Codyboy,any issues with gear mesh? Mine is either too tight or too loose with 9,10,or 11T.Not trying to monkey up your awesome thread,but I wanted to get it out there for maximum feedback. Thought you might could recommend a talented machinist to fab us an alloy motor plate;-). I know your plate is full,but ......jus sayin' 8). I don't see needing any adjustment above an 11T,as top speed has never been lacking lol. Your thoughts please
I hear your concerns, I'm running a HH Stubby 2700 puller with a 9 tooth and it seams to be working fine. No heat problems, so I haven't given it much thought. I could give it a little time and thought and see what I could come up with. NO promises!
I'm headed up to see a friend tomorrow, (Kelly Lunsford owner of Lunsford Titanium) to run some ideas by him on my weights. I will draw something up and see what he thinks. My problem is not having the right tools to a large production run and most drivers on here aren't willing to pay the price for quality products. All they see is the price and don't consider at all the time venders put into the design of parts. Because of the Chinese market the sale of my weights have dropped way off. I think the biggest problem for new design on here is that people aren't loyal to the venders dedication to try and come up with design for a small market. For me being retired, I'm not relying on my parts to make a living, but some are! And our time is money, or time away from family!;-)
OK, off my soap box, I'll see what I can come up with. "thumbsup"
Ernie
Mudflap84
Pebble Pounder
Agreed and thank you. Sick of working on this or servos constantly. I don't mind paying top$ for top quality-you get what you pay for. Safe travels [emoji106]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
So my conclusion on designing a new motor mount is that it is above my shop capabilities. What I'm thinking is to order another motor mount and very carefully open up a slot between the a and b holes (or b and c) on each screw and then see how the motor will hold it's adjustment on the mount.
For someone who has a CNC or mill it would be a lot easier for them to build.
Sorry, best my little pea brain can do.;-)
Mudflap84
Pebble Pounder
Sounds good Codyboy. I've shelved the trx 4 for a while till the after market eeks out a few parts. Went back to work on the 10.2 .The Traxxas is a donor vehicle for now
Mountainsofbeer
Quarry Creeper
Are you guys shredding spurs or what should I be looking out for with motor twist? My gears look pretty good so far I have to say not much wear at all
Inspector86
RCC Addict
I have had zero trouble with the pinion and spur gear. I went to a 9 tooth pinion and installed a HR aluminum mount plate. No issues with the motor moving and gear mesh is just about perfect.
Last edited:
Ok guys, I have a few more pair of weights ready to go down the road.
And doing some rear weights now. These are now made of five stackable discs that can be added or remove to counter your weight bias. Less see if china will copy this one!
And doing some rear weights now. These are now made of five stackable discs that can be added or remove to counter your weight bias. Less see if china will copy this one!
Last edited:
wrightcs77
RCC Addict
Dang, my 3 plate ones are already out of date.....
Sent from my Pixel XL using Tapatalk
