Szczerba's #3744 Jeepspeed Cherokee

[Szczerba]

Starting off with TSS SCX-HR chassis

Big Bore shocks, JeepinDoug spring cups, losi blacks and RPM two stage pistons (blue for now)

Mock links
Vanquish SCX Curries
1.9 MTZ's
Crawler Innovations DD foams
Mock up wheels

3-link for now
Holmes Hobbies BL Servo

Mock up honcho bumper. May not use this

Axial sway bar out back with mock up tlt mounts on curries



TSS Smooth Skid
Vanquish trans case
Robinson internal gears
32p spur
Mock up Tekin 13.5
MIP drivelines

Dinky RC Cherokee roof racks
Dinky RC cheap seats
Dinky RC steering wheel
Proline fuel cell


Mocked up

[2JSC]

Need more length on those sway bar links... other than that looks killer.

[Szczerba]

Thanks, It's not at final ride height right now, ill adjust all that later. The springs are losi 1.2's and will probably be too soft. All just mock up right now. Went with second from lightest blue rpm pistons too. Not sure which pistons ill end up with when its ready to roll.

[SAL45]

After your last Cherokee I cant wait to see what you come up with! Looks good so far

[klampykixx]

subscribed. keen to see how it pans out. plus, looking for inspiration for an upcoming build too. so get building haha

[Lentsnh2012]

I look forward to seeing this one done up, Shane . I sure do miss the JeepSpeed that I built.

[Szczerba]

Originally Posted by SAL45

After your last Cherokee I cant wait to see what you come up with! Looks good so far

You remember that ol' rig? I plan on topping it with this one. Or getting close.

Here is the rig we are talking about.
Szczerba's Cherokee (Minus some doors)

Originally Posted by klampykixx

subscribed. keen to see how it pans out. plus, looking for inspiration for an upcoming build too. so get building haha

Think a mix between a 1700 and a 3700 class jeepspeed rig. Plan on making this one able to hit the trail or the U4 track.

Originally Posted by Lentsnh2012

I look forward to seeing this one done up, Shane . I sure do miss the JeepSpeed that I built.

That was a cool rig too. I looked at it several times and have subscribed to it for reference. I wont be coping the long arm front suspension setup. Lol

All I am waiting on is the 3/16" tube and a few odds/ends parts but there are things I can do now. The shock setup is going to be interesting, as I have never used these two stage pistons and it took me about 2 hours to get them installed but I think they will be worth it.

Cant post without a picture of some sort

[Lentsnh2012]

Originally Posted by Szczerba

That was a cool rig too. I looked at it several times and have subscribed to it for reference. I wont be coping the long arm front suspension setup. Lol

All I am waiting on is the 3/16" tube and a few odds/ends parts but there are things I can do now. The shock setup is going to be interesting, as I have never used these two stage pistons and it took me about 2 hours to get them installed but I think they will be worth it.

Yeah it was. It was a shame I had to sell it. That Twin I beam setup was a big PITA, but it performed great when I had it setup correctly. Feel free to try it though if you want! I'll help you out as best as I can.

I wish I could give you some advice on the stage pistons but I haven't messed with those either. I bet they would be great for a heavy rig though.

[Szczerba]

Originally Posted by Lentsnh2012

Yeah it was. It was a shame I had to sell it. That Twin I beam setup was a big PITA, but it performed great when I had it setup correctly. Feel free to try it though if you want! I'll help you out as best as I can.

I wish I could give you some advice on the stage pistons but I haven't messed with those either. I bet they would be great for a heavy rig though.

Solid axle's for this build. there are 6 RPM pistons to choose from. Let's call them 1-6, 1 being lightest. I put in #2 front and back to start with and 35 wt oil as it recommends.

[Mighty1]

subscribed dude!

[Hacksaw707]

Diggin it

[STANG KILLA SS]

yes! perfect choice on tires too Shane.
digging the honcho bumper too.

[Lentsnh2012]

Originally Posted by Szczerba

Solid axle's for this build. there are 6 RPM pistons to choose from. Let's call them 1-6, 1 being lightest. I put in #2 front and back to start with and 35 wt oil as it recommends.

That's a good plan to stick with

I think the pistons would be great for fine tuning. Especially with the softer springs that you have installed. Or at least they look it.

[Szczerba]

Originally Posted by Mighty1

subscribed dude!

Originally Posted by Hacksaw707

Diggin it

Thanks guys, we'll see how it turns out.

Originally Posted by STANG KILLA SS

yes! perfect choice on tires too Shane.
digging the honcho bumper too.

Tires will stay, honcho bumper may get replaced with a dingo front bumper or a welded one.

Originally Posted by Lentsnh2012

That's a good plan to stick with

I think the pistons would be great for fine tuning. Especially with the softer springs that you have installed. Or at least they look it.

I will probably end up going with 20wt oil and the lightest pistons. I built 4 other shocks for my 2.2 wraith today and learned some things. Also been texting with Almighty Malach about RPM and MIP piston setup

Still waiting on the 3/16" tube and some other parts to show up.

[klampykixx]

i find RC trucks like to have a bit of weight about them when it comes to properly functioning suspension. would you agree? or does it very much depend on the shocks themselves?

[Szczerba]

Originally Posted by klampykixx

i find RC trucks like to have a bit of weight about them when it comes to properly functioning suspension. would you agree? or does it very much depend on the shocks themselves?

You are correct but it really depends on how good you know how to setup suspension, weight distribution and shocks/springs. It does depend on the shocks as well, I am learning not to skimp on shock quality or setup. I think a heavier "thrown together, not tuned" rig can be a "band aid" for a lighter weight, correctly setup truck, if that makes sense. But heavy rigs can work great too, when setup for it. I had a 7.25lbs custom twin hammer that had a 6oz scale LS1 out back and it worked awesome in 2nd fast runs, blasting around the ultra4 track or in 1st gear crawling in the trail.

[Rckcrwlr]

Subscribed to this one....

Love that chassis...

[TAT76]

Another sub..


Sent from the bush using Tapatalk

[pastimesteve]

Subscribed as well. Looking forward to this one!

[EeePee]

Unsubscribing.