07-04-2010, 10:17 AM | #1121 |
RCC Addict Join Date: May 2010 Location: So. Charleston. Wv
Posts: 1,221
|
My ax10 Added: Axial aluminum link kit. (orange) Axial 55t motor w/ 20t pinion Traxxas Rod ends Axial vert mounts proline bronco body On the list. Hitec 645mg (Ordered) Traxxas Rodends (3 link) Axial 3 link connector ends Axial drive shaft ring Panther Cougar 2.2 w/ soft foams Axial frame extentions Heres the pics as of right now. enjoy!! Out of the box RTR NOW: kinda going for the scale look...... |
Sponsored Links | |
07-04-2010, 07:26 PM | #1122 |
Quarry Creeper Join Date: Jun 2010 Location: 801 El Capital
Posts: 434
| My used to be rtr.
Purchased as a rtr. Now is a comp rig at least in my oppinion RTR Green color pack added Green front bent links also added Red upper links added to break it up some Custom lexan upper link plates for electronics STRC tranny mount plate with links mounted internally Losi comp shocks Custom 4-link plates front and rear battery mount on either side of steering servo CKRC wiggle steering servo Castle Creations Sidewinder ESC with CC BEC Novak 55 brushed motor Panther tires front and rear weighted TQ3 link 2.4ghz system Losi comp body for now Dig in near future. Oh and my bro. in laws redcat. |
07-07-2010, 08:22 AM | #1123 |
I wanna be Dave Join Date: Dec 2009 Location: Lady Lake, Fl
Posts: 2,128
|
Heres mine, FF-4 all the way!! It has evolved a little-stock artr to slingshot to ff-4 to the present Fastback!! Last edited by billj; 08-30-2010 at 12:19 PM. |
07-08-2010, 08:08 PM | #1124 |
I joined the Band! Join Date: Aug 2009 Location: Maryville, Tn
Posts: 1,198
| updated pics of the tuber |
07-22-2010, 10:58 AM | #1125 |
Newbie Join Date: Jul 2010 Location: Estonia
Posts: 23
| Last edited by Estonia boy; 07-29-2010 at 02:02 PM. |
07-22-2010, 08:56 PM | #1126 |
Pebble Pounder Join Date: Jun 2008 Location: PISCATAWAY
Posts: 128
|
insision chassis 55t novac motor hurtz dig 4pk radio |
07-24-2010, 11:34 PM | #1127 |
RCC Addict Join Date: May 2010 Location: So. Charleston. Wv
Posts: 1,221
|
group shot after mods an some crawlin Left to right Phantomrs10 (me), Axialchevy an onebdgti |
07-28-2010, 07:01 PM | #1128 |
Rock Stacker Join Date: Jan 2010 Location: warrensburg
Posts: 63
| front setup rear links just alittle modification for my dig lol another rear pic the whole hog the whole bottom view |
07-29-2010, 08:12 AM | #1129 |
Rock Stacker Join Date: Oct 2009 Location: Portugal
Posts: 52
| My AX-10 Vanquish
Hello My AX-10 Vanquish Chassis Axial Pro VP Incision VP Hurtz Shifter 3 Position Dig for Axial AX-10 Vanquish Axial Rear 4 Link plate VP Axial Front Battery/Servo 4 Link Plate VP Shock Mount Razors VP Axial Rear Axle Lockouts VP Axial High Steering Knuckles Zero Acker VP Axial AX-10 Alum Trans Housing Radio: DX3R ESC: Mamba Max Pro Engine: 21, T Novak Brushless BEC: Castle 10AMP Lipo: 3s 1500mAh 20c Servo: Hitec HS-7950TH Transmission: MIP Axles: Golden Horizon Tyres: HB Ex-Rover Rims: VP Procomp DH 2.2 Bumpers: Losi Measure Wheelbase: 320mm Overall width: 240mm Clearance of difference: Blocked Center Chassis clearance: 80mm Overall height: 180mm Weight: 2900Kg Body: Beetle Regards Freitas Last edited by Freitas1979; 07-29-2010 at 08:15 AM. |
08-02-2010, 04:40 AM | #1130 |
Quarry Creeper Join Date: Jan 2009 Location: WA state
Posts: 283
|
F-150 axial cut boggers motor 55t/19t traxxas 2075 servo Jeep axial frame 36/14 front gear set 43/13 rear gear set motor 35t/14t, soon to be 55t/21t Novak orange esc traxxas 2076 servo 2.2 roklox ... I'm in the process of slowly rebuilding my AX-10. I'm going with a Van body and thinking about getting the SCX10 frame set. The old F-150 body I had. I wish I would've taken better care of it and went down to 1.9s instead of trying to figure out a way to fit 40 series tires haha Last edited by THX_138; 04-29-2018 at 11:58 PM. |
08-04-2010, 09:00 AM | #1131 |
Newbie Join Date: Jul 2010 Location: High Point
Posts: 4
| another ax10 with proline tube body
Axial ax-10 Proline tuber body Novak 55T motor (swapped sides) Rooster Crawler ESC Panthers on proline wheels, memory foams Hitec rs 5645mg servo Hitec agressor tx 3300 and 4400 NiCd batteries mods... extended upper links(50>70), redrilled chasis mip racing steel HD driveshafts inboarded lower links slipper clutch booty fabbed output shaft oh and rock lights !! day one, per the instructions today, per some breakages, post reading, and creative modding |
08-07-2010, 01:16 AM | #1132 |
cherry bomb Join Date: Jul 2006 Location: Nanaimo, BC, Canada
Posts: 1,598
|
my custom AX10 crawler. (custom, or bolt on? I dunno, I like it) started as a stock ARTR kit when I got it, -Integy Matrix pro 55t motor -Integy HD Driveshafts -Robinson Racing solid steel gear/outputs -XL5 waterproof ESC (mounted on front links) -Team Associated TX/RX -towerpro MG996R steering servo with alum. horn -turnigy 1600mah 2 cell lipo (mounted on rear links) -weighted wheels/cut foams (proline hammers) -Integy steel tube chassis, skinned with soda cans -RC4WD 109mm aluminum bodied shocks, REALY soft springs. (I did not like the ride height I got with the ARTR shocks) next on the list is aluminum wheels, and a new set of tires, still unsure on what though. might be forgetting stuff, i'd like to know what you guys think of it. thanks for looking, cheers |
08-08-2010, 09:36 AM | #1133 |
Rock Stacker Join Date: Feb 2009 Location: Granite Falls
Posts: 53
| T1E Chasis
My Axial Moonbuggy |
08-14-2010, 10:55 AM | #1134 |
Pebble Pounder Join Date: May 2010 Location: Sunrise
Posts: 110
|
FF-4 chassis (thanx DickyT) VP dig MIP drive shafts Hitec 7950 servo LD bta G made shocks Novak 55 Gold Losi springs Rooster crawler esc Motoworx 7 spoke AL wheels White rovers Pro line 2 stage foam Axial high knuckles Unkown al C's CC BEC 7v Gunnar body mounts Hitec 645 dig servo Racers edge pro servo horn 3 Racing cvd homemade links 2s batteries Proline Crowd Pleazer body Last edited by Rocky666; 08-14-2010 at 04:15 PM. |
08-18-2010, 11:03 PM | #1135 |
Quarry Creeper Join Date: Jun 2009 Location: Visalia, CA
Posts: 345
| Started life as an AX-10 Kit: CHASSIS: VP Incision AXLES: Front- Axial heavy duty R&P, Axial CVDs, HR heavy duty spool, RCP Cs Rear-VP lockouts, VP Razor shock mounts, Axial Straights, TCS Boomerang uppers mount, Axial heavy duty R&P STEERING: Hitec HS 7950TH (w/ Hot Bodies aluminum arm), CKRC BTA w/CKRC high steer knuckles SUSPENSION: 3 link front / 4 link rear, Axial Comp Shocks, Axial 70mm uppers, East End Machining lowers (bent rears) DRIVETRAIN: VP transmission housing w/ HR aluminum gears, spur and spur mount, VP Hurtz Dig w/ Hitec servo (cheapie for now!), MIP cvd drive shafts WHEELS & TIRES: Pro Line Chisels on Mayhem Engineering Competition Double Phattys ELECTRONICS: Novak Goat w/ 55 brushed motor, Spektrum DX3R w/ sr3100 receiver, CKRC 1300mah 7.4v lipo BODY: Axial XC-1 Black w/ Tamiya dull coat on outside |
08-19-2010, 01:28 PM | #1136 |
Pebble Pounder Join Date: Jun 2010 Location: pelham
Posts: 144
|
Axial AX10 HR Chassis HR skid plate HR bent lower links HR upper links HR Stearing links HR shocks Losi Rock Claws cut foams CC SideWinder esc JR Racing Z590M servo parts yet to put on, new body, Sedonas, new servo, internals. heres some action shots from today |
08-20-2010, 09:08 AM | #1137 |
Pebble Pounder Join Date: Mar 2010 Location: Jacksonville
Posts: 108
|
My turn: Bought used ax10 with alloy links and 3racing chassis. Hot Racing dig Novak 55t 3racing front driveshaft I've since added 4s lipo, HH BR-XL, MIP driveshaft rear, and rc4wd aluminum wheels with panther leopard tires. |
08-22-2010, 05:01 PM | #1138 |
Pebble Pounder Join Date: Jul 2008 Location: saipan cnmi
Posts: 153
| ax10 warthog
here is my comp ready ax10 with warthog chassis. what you guys think??? she used to look like this: now she looks like this: questions welcomed...thanks for looking! |
08-22-2010, 10:58 PM | #1139 | |
Newbie Join Date: Aug 2010 Location: jennifer18
Posts: 1
| Quote:
__________________ watch movies online | |
08-25-2010, 04:30 PM | #1140 |
Newbie Join Date: May 2010 Location: Portland
Posts: 19
|
1200kv ez-run brushless combo (waterproofed) 7.4v 40c lipo iron lockers jr8711 servo alum servo horn alum c's and steering k's Integy EXT+15mm wheel hubs Integy 159mm links traxxas 27 tq3 tx rx custom frame Savage shocks Panther Cougar 2.2 with rod bearings from a 350 chevy engine for weight's 2000 chevy stepside new bright Silverado body (like it the most) I know it says completed rigs but I think there's always room to do more to them. Plans to come, Dig rear steer 23mm wheel adapters 4.0 moab wheels and tires. maybe dovetail the front and rear custom frame tube cage lights But for now... |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/axial-ax-10-scorpion/82403-axial-ax-10-picture-archive-no-talking.html | ||||
Posted By | For | Type | Date | |
RE: Anyone Have a Mini MGT? | This thread | Refback | 10-05-2011 08:59 AM |
Axial AX-10 Picture archive - No talking - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1.9 scale rig picture archive - No talking | 123abc | 1.9 Scale Rigs | 2041 | 03-26-2024 03:44 AM |
Redcat Picture Archive - No talking | EeePee | Redcat Crawlers | 404 | 02-08-2024 06:23 PM |
1.5 scale picture archive - No talking | 1BadJeepBruiser | 1.5 Scale Rigs | 358 | 07-04-2023 03:22 PM |
SCX10 Picture Archive - No talking | BENDER | Axial SCX-10 | 3332 | 06-04-2023 05:40 PM |
Wraith Picture Archive - No talking | Harley | Axial Wraith | 1586 | 03-22-2023 11:32 AM |
| |