|
| LinkBack | Thread Tools | Display Modes |
11-14-2017, 05:35 PM | #1 |
Rock Crawler Join Date: Mar 2005 Location: Dude on my dirt bike in SoCal!!!
Posts: 949
| Anyone use these trailing arms?
So i have a stock arm that i think its about to fail on me (looks like its cracking by the chassis) The stock plastic arms have done very well as far as durability so i was just going to buy those, but i saw these on ebay and was wondering if anyone was running them https://www.ebay.com/itm/Rear-Lower-...E44MQyDzetpLTA Im tempted to stick with the stock arms as being plastic they slide well over the rocks, aluminum, not so much. |
Sponsored Links | |
11-14-2017, 05:45 PM | #2 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: Anyone use these trailing arms?
You get what you pay for. Which is why I'm going to get a set of supershafty's stainless steel trailing arms. Sent from my Nexus 5 using Tapatalk |
11-14-2017, 06:06 PM | #3 |
RCC Addict Join Date: Jun 2017 Location: Canada
Posts: 1,742
| Re: Anyone use these trailing arms?
If you cant replace the rod ends, you will be buying new arms so I would say no to these cheap ebay trailing arms Sent from my Nexus 6 using Tapatalk |
11-14-2017, 06:34 PM | #4 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: Anyone use these trailing arms?
Yep, that's why I suggest supershafty or vanquish. Sent from my Nexus 5 using Tapatalk |
11-14-2017, 07:32 PM | #5 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Anyone use these trailing arms?
SSD makes a nice set, as does Blue Monkey. However, the JEC Design / SuperShafty arms are my favorite, which is why I got 'em.
|
11-15-2017, 07:01 AM | #6 |
Moderator Join Date: Aug 2017 Location: Readsboro, VT
Posts: 2,053
| Re: Anyone use these trailing arms?
The stock plastic arms combined with the aluminum gussets from the Bomber kit get my vote. They're plastic so they slide over the rocks, but the aluminum gussets make them much more rigid. The plastic arms are cheap enough that in the event you do break or wear out another one, you can just keep spares on hand.
|
11-15-2017, 09:47 AM | #7 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Anyone use these trailing arms?
Mine will be up on the classified section soon... meh. Gimme stainless!
|
11-15-2017, 09:50 AM | #8 |
Rock Crawler Join Date: Jul 2017 Location: BC, Canada
Posts: 742
| Re: Anyone use these trailing arms? |
11-15-2017, 11:27 AM | #9 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Anyone use these trailing arms?
The kit arms and braces for the Bomber. I'm going to install my JEC Racing/SuperShafty stainless arms... My kit hasn't been built yet!
Last edited by durok; 11-15-2017 at 11:29 AM. |
11-15-2017, 02:58 PM | #10 |
Quarry Creeper Join Date: Aug 2015 Location: Worthington
Posts: 267
| Re: Anyone use these trailing arms?
I had the idea of making my own braces and while at I had the thought of wrapping the brace around the bottom of the trailing arm i.e. toco. Now I'm hungery lol
|
11-16-2017, 03:55 PM | #11 |
Rock Crawler Join Date: Mar 2005 Location: Dude on my dirt bike in SoCal!!!
Posts: 949
| Re: Anyone use these trailing arms?
Yeah im gonna just stick to the stockers with my kit plates... super shafties are nice... but good god, 50 bucks on sale for 2 small pieces of metal, no thanks. I can get 3 sets of stokers for that price
|
11-19-2017, 08:51 AM | #12 |
Newbie Join Date: Nov 2017 Location: CO
Posts: 35
| Re: Anyone use these trailing arms?
It's ok bling but heavy than stock and not durable like expensive sets. I would like to try the plates on a stock set, maybe just one per arms, may have to make um.
|
11-19-2017, 05:12 PM | #13 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Anyone use these trailing arms?
Just don't make somethin' along these lines: https://l3rc.com/images/axial_yeti/a...led_guards.jpg Doesn't hardly strengthen the arms (only in one spot), will drag and catch on obstacles worse than stock, and they're more expensive than a whole set of cheap eBay arms. An interesting trailing arm design that Carter Fab & Machine sells: Carter Fab & Machine » Yeti Fabricated Trailing Arms- Raw I've seen someone else make a similar style themselves. Somewhat ugly, but very scale and functional! |
11-20-2017, 08:41 AM | #14 |
I wanna be Dave Join Date: Jan 2005 Location: Raleigh-ish vicinity
Posts: 3,846
| Re: Anyone use these trailing arms? But you will probably wear out the ball ends on all 3 sets of stock arms before you wear out the first set of Revo ends on the SS arms. The plastic stock arms may not fail but those ball ends stretch and become unbearably sloppy rather quickly.
|
11-21-2017, 11:22 AM | #15 | |
Rock Crawler Join Date: Mar 2005 Location: Dude on my dirt bike in SoCal!!!
Posts: 949
| Re: Anyone use these trailing arms? Quote:
I will stick to the stock arms at this point unless this becomes a more prevelant issue. Had the rig for over a year now and this is the first major part that has show any signs of failure, though it has not yet failed. | |
11-21-2017, 11:32 AM | #16 | ||
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: Anyone use these trailing arms? Quote:
This. Vanquish have the problem mentioned above. When the ball wears the arm you have to toss it and get a new one. The VP design is stupid. Quote:
Carter Fab stuff looks like absolute garbage. I can't get over the Mickey Mouse look of his stuff. | ||
08-18-2018, 07:15 PM | #17 | |
Moderator Join Date: Aug 2017 Location: Readsboro, VT
Posts: 2,053
| Re: Anyone use these trailing arms? Quote:
| |
08-18-2018, 08:02 PM | #18 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Anyone use these trailing arms?
The biggest problem with stock trailing arms is that if you stretch or break the area around the pivot balls, you can't just swap a new set of rod-ends in and keep going... New rod-ends are dirt cheap! I recommend SSD if you are on a budget, JEC Racing if you want them out of a harder alloy (7075 instead of 6061 T-6) or stainless steel (heavier) for sliding over rocks better. Also, if you want to shorten your rear end for better crawling, JEC offers Wraith or even shorter Twin Hammers lengths of the same arms, and they all use Revo rod-ends available at any LHS. I have both SSD and JEC SS trailing arms, can't ask for better! |
08-18-2018, 08:05 PM | #19 |
Moderator Join Date: Aug 2017 Location: Readsboro, VT
Posts: 2,053
| Re: Anyone use these trailing arms?
I don't like that the SSDs use M3 rod ends instead of M4. The JECs look great but nobody seems to have them in stock. I'm looking at the Blue Monkey arms and so far I like what I see. The Vanquish arms look strong, but if they wear out at the balls they're toast.
|
08-18-2018, 08:11 PM | #20 |
Moderator Join Date: Aug 2017 Location: Readsboro, VT
Posts: 2,053
| Re: Anyone use these trailing arms?
Ughhh! Looks like Blue Monkey stuff is vaporware too.
|
Anyone use these trailing arms? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for some better trailing arms. | MattySlimz1987 | Vaterra Twin Hammers | 4 | 03-19-2017 03:48 PM |
trailing arms | fullsizecrawler | Axial SCX-10 | 3 | 01-17-2016 08:40 PM |
| |