|
| LinkBack | Thread Tools | Display Modes |
04-23-2014, 04:45 AM | #1 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Wraith axles installed into SCX10- Driveshaft help...PICS
I just did the swap, runs great but the drive shafts are rubbing the upper links, even after I shaved them. What Driveshaft would you recommend? I need a thinner one in diameter. Thanks for any help. Last edited by 1BAMFR; 04-23-2014 at 02:54 PM. |
Sponsored Links | |
04-23-2014, 06:40 AM | #2 |
RCC Addict Join Date: Mar 2009 Location: Interior BC
Posts: 1,786
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS
high clearance 30degree upper links would help.
|
04-23-2014, 07:08 AM | #3 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS
I made bent upper links for mine with Allthread. But, it looks lime you could get away with flipping the trans. |
04-23-2014, 07:39 AM | #4 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 07:40 AM | #5 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 10:53 AM | #6 |
Newbie Join Date: Jan 2012 Location: Port Coquitlam, BC
Posts: 27
|
You need to flip your axles so the diff cover is on the other side Sent from my SGH-I337M using Tapatalk |
04-23-2014, 01:17 PM | #7 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 02:09 PM | #8 |
Newbie Join Date: Jan 2012 Location: Port Coquitlam, BC
Posts: 27
|
stretching the wb would help with that Sent from my SGH-I337M using Tapatalk |
04-23-2014, 02:22 PM | #9 |
RCC Addict Join Date: Mar 2009 Location: Chilton
Posts: 1,622
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 02:27 PM | #10 |
Newbie Join Date: Jan 2012 Location: Port Coquitlam, BC
Posts: 27
|
Its just over 13, i can measure it for you when I got home from work if you like Sent from my SGH-I337M using Tapatalk |
04-23-2014, 02:41 PM | #11 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 02:43 PM | #12 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 02:55 PM | #13 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 02:56 PM | #14 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 04:07 PM | #15 |
Newbie Join Date: Jan 2012 Location: Port Coquitlam, BC
Posts: 27
| |
04-23-2014, 04:47 PM | #16 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
04-23-2014, 04:48 PM | #17 |
Newbie Join Date: Jan 2012 Location: Port Coquitlam, BC
Posts: 27
|
No prob I remember the s**ti went through building mine Sent from my SGH-I337M using Tapatalk |
04-23-2014, 05:17 PM | #18 |
RCC Addict Join Date: Mar 2009 Location: Chilton
Posts: 1,622
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS
I made all my links so I just made them to the length I wanted and needed. I am not sure what you would need as far as buying them other than measure what you have and talk to somebody that makes the like VP or Chaotic Crawlers and tell them what you have and what you want.
|
04-23-2014, 06:23 PM | #19 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS
This is the way I've got my links, full flex both ways, no rubbing on driveshafts. Wb is 12.5
|
04-23-2014, 07:02 PM | #20 |
Pebble Pounder Join Date: Mar 2012 Location: York
Posts: 131
| Re: Wraith axles installed into SCX10- Driveshaft help...PICS |
Wraith axles installed into SCX10- Driveshaft help...PICS - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
scx10 before and after pics with wraith axles | sawhead | Axial SCX-10 | 1 | 11-25-2013 02:54 PM |
Need width of scx10 axles with 650 SLW hubs and/or 750? Pondering wraith vs scx10. | Desert Rc | General Scale Talk | 6 | 06-25-2012 05:28 PM |
Servo/ESC installed [pics] | fatwreck | General Crawlers | 3 | 03-01-2006 03:47 PM |
I need some pics of an installed Pede tranny? | painly | Tamiya TLT Crawlers | 8 | 11-26-2004 12:37 PM |
| |