10-20-2011, 10:16 AM | #81 |
Rock Crawler Join Date: Jul 2010 Location: VOLS!
Posts: 564
| |
Sponsored Links | |
10-20-2011, 11:31 AM | #82 |
Newbie Join Date: Oct 2011 Location: laurel county
Posts: 43
|
All stock ......for now .... I'm thinkin about a doin harleys setup
|
10-20-2011, 12:31 PM | #83 |
Rock Stacker Join Date: Apr 2009 Location: sheilock
Posts: 89
|
esc: modded tekin fxr motor: integy 35t gearing: 87t spur/16t pinion battery: duratrax 5000mah 2s 25c radio: traxxas tq2 2.4 soon to be tq4 servo: spektrum s6030 soon s6070 when the axial dig is released |
10-20-2011, 03:00 PM | #84 |
Quarry Creeper Join Date: Oct 2011 Location: Georgetown, On
Posts: 345
|
Updated: Novak Goat 2S 18.5 Hightech 5645MG Digital Traxxas 2.4 Dynamite 2S 25C 6000Mah |
10-20-2011, 03:05 PM | #85 |
TN State Champ 11,12,13 Join Date: Oct 2008 Location: KTM Talk.com
Posts: 1,796
| |
10-21-2011, 10:52 AM | #86 | |
I wanna be Dave Join Date: Aug 2004 Location: san jose
Posts: 2,061
| Quote:
| |
10-21-2011, 12:24 PM | #87 |
Rock Stacker Join Date: Sep 2011 Location: over seas
Posts: 80
| |
10-21-2011, 01:02 PM | #88 |
Newbie Join Date: Jan 2009 Location: Canada
Posts: 6
|
I got twin hamsters in mine...you should see those suckers go when I stomp my foot |
10-21-2011, 04:05 PM | #89 |
I wanna be Dave Join Date: Jun 2008 Location: Vermont
Posts: 2,016
|
I'm just about finished building my kit and am waiting on a replacement for a defective tire and for my new rims to show up. My electronics are installed and ready though. Holmes BRXL 55t Integy (for now) being replaced by a Holmes motor of some kind once I can afford it Hitec 7955TG Thunder Power 2250mah 3s to start with. My big 5000mah 3s I use for long distance hiking won't fit just yet. |
10-21-2011, 04:17 PM | #90 |
Sometimes, I make things. Join Date: May 2009 Location: Mt. Upton
Posts: 1,043
|
Br00d 35t Onslaught motor, and a BRXL waterproofed. It works great.
|
10-21-2011, 04:42 PM | #91 |
Newbie Join Date: Aug 2011 Location: Chicago area
Posts: 33
|
Tekin Redline 13.5T sensored brushless motor CC MMP ESC 5000 3S lipo CC BEC |
10-24-2011, 11:28 AM | #92 |
RCC Addict Join Date: Feb 2005 Location: Minneapolis
Posts: 1,496
|
Looking at getting a Tekin Pro4 for my Wraith. I want to run mainly 2 cell, I guess 3 cell if I have to. Not really interested in running 4 cells or more. What Kv would people recommend. I was thinking the 3300 Kv should still be fine.
|
10-24-2011, 11:51 AM | #93 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
I would agree, the 3300kv motor should be fine for 2s and 3s use. I will be trying them and stocking them as soon as they are available.
|
10-24-2011, 01:45 PM | #94 |
Rock Crawler Join Date: Nov 2004 Location: in a basement in Kalispell, MT
Posts: 857
| Really depends on what you going to do with it. For most, I'd go 3300, for slower crawling 17.5 redline. If you have low c rated batteries, the pro4 will suffer. Amp hungry motors they are.
|
10-24-2011, 05:12 PM | #95 |
Newbie Join Date: Sep 2011 Location: st.marys
Posts: 13
|
Hhbrxl Hh cobalt puller 7t 3s lipo Hitec servo |
10-24-2011, 05:25 PM | #96 |
Quarry Creeper Join Date: Mar 2010 Location: murrieta
Posts: 390
|
So I thought I had this motor thing all figured out, I bought a cc mamba max pro and a novak 18.5 ballistic. But now Im not sure if this is right for me, we mostly do crawling and water crossings happen alot, I dont want to be the guy who carrys his across. I would like some speed but its not why I bought the wraith. any help here please, and I do know what the search button is for. thanks...
|
10-24-2011, 07:22 PM | #97 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Search google for conformal coating, aerosol type. Open up the motor and give the sensor PCB two or three coats of the junk, probably best to do three thin coats and let it dry between each. Seal up any holes with silicon caulk, caulk the can when you reassemble, and hope for the best. The water will still ingress through the bearings, so you could soak the motor parts in corrosionX if you wanted. Bearings, rotor, and stator are the important parts.
|
10-24-2011, 07:30 PM | #98 | |
Quarry Creeper Join Date: Mar 2010 Location: murrieta
Posts: 390
| Quote:
what would you suggest I run 3cell most of the time and could keep the cc esc? thanks | |
10-24-2011, 07:50 PM | #99 |
RcBros Hobbies Join Date: Nov 2005 Location: Oregon
Posts: 4,646
|
Hey Guys, looking for some setup help. Specs Motor:Tekin 17.5 ESC: Mamba Max Pro Servo: Hitec 5955TG External BEC: Castle Lipo: Cheap 2200mah 3s Turnigy I was under the impression that with this combination I'd have a considerable amount of wheel speed over the stock setup. So far that is not the case. I cannot even get the truck to wheelie lol. I first tried a 19/80 gearing. Thinking the gearing was to low, I tried 22/80 and now get cogging at low crawl speeds. I've tried several different MMP settings, different timing, different RPM boost settings etc.. I'm getting nowhere. A buddy is telling me its the MMP. But it seems some are having great success with the MMP. If anyone is running this setup, I'd love to see what you are running on your MMP settings and the gearing you have selected. I just feel this setup should rock and it simply does not. Thanks for any help! |
10-24-2011, 08:22 PM | #100 | |
Quarry Creeper Join Date: Mar 2010 Location: Los Angeles
Posts: 255
| Quote:
Per the HH web site, the above motors are rated at: 11t Crawlmaster = 2675 kv 17t Torquemaster = 3753 rpm/v Did you mistakingly put 3753 kv for the 17t Torquemaster or is the following relationship true? rpm/v = kv New to this so I'm trying to get a basic understanding of motors. Thanks... | |
| |