RCCrawler Forums

rojo · 10-19-2011, 12:55 PM

Quote:

Originally Posted by Harley

I run 60/15 which is the same ratio but won't fit in the spur cover.

I run 60/15 as well, but it fit in my cover. I did have to turn the "lip side" of the spur gear towards the transmission though (Sits deeper on the shaft that way).

DiEzel · 10-19-2011, 06:47 PM

Got everything cleaned up a bit. Kinda stoked - Wraith took a swim Saturday and the receiver/BEC's were goin bonkers. Today - Everything worked minus the servo i knew was toast.

Here's what you see.(Ignore the heatshrinkless -)

Battery - Sky Lipo 4400mah, 3s LiPo.
Balloon's content's includes: R614FF (4ch Receiver), Two Castle 10A BEC's, Axial's LED Controller and a whole mess of wires.

DiEzel · 10-20-2011, 04:53 PM

Ready for this weekend..

OntarioCrawler · 10-20-2011, 08:29 PM

Looks good! i just got my Goat system installed, LOVE it. find my servo works much better with it too.

Id love to crawl this weekend, but i doubt ill get to it...

DiEzel · 10-21-2011, 02:20 PM

Hell yea..

OntarioCrawler · 10-21-2011, 03:19 PM

are you still running stock chubs?

DiEzel · 10-21-2011, 03:39 PM

Quote:

Originally Posted by DiEzel

Vanquish Knuckles x2
Vanquish C's (Front)
Vanquish V6 SLW
Vanquish Titanium Steering x2
Vanquish Titanium Links
Vanquish Diff cover (Up front, Rear soon)
Mayhem Monster 2.2's (1", Narrow)
STRC C's (Rear)
Mamba Max Pro
Tekin Pro4 3300kv (32p 56/14)
Futaba BLS157HV
Hitec 7950x2 (1 spare)
Pro-Line Swampers
Axial R35 Ripsaws
HR Hardened Steel Gears
FELENFEST lockers
MIP AX10 Driveshafts w/ Traxxas 4mm screw pins.
Level 3 lowering kit
CKRC Battery plate
3s -4400,4s2200.

.

VintageCopal · 10-23-2011, 02:07 AM

Quote:

Originally Posted by DiEzel

.

...........Thats what i was thinking....

guidetti_angelo · 10-23-2011, 02:58 PM

compliments for your truck ;)
listen, is tekin pro4 with MMP able to crawl or is it too fast, i didn't find any video that show a set up like your on scaler course..
thanks in advance
Angelo

DiEzel · 10-23-2011, 03:27 PM

Quote:

Originally Posted by guidetti_angelo

compliments for your truck ;)
listen, is tekin pro4 with MMP able to crawl or is it too fast, i didn't find any video that show a set up like your on scaler course..
thanks in advance
Angelo

Thanks. Id like to get some video of mine so i CAN show just how good the lowspeed really is, It is REALLY REALLY Good. And the drag-brake works just as good as a brushed motor, if not better... I never was a big fan of brushless motor's in a crawler -this has changed my view entirely..

guidetti_angelo · 10-23-2011, 03:30 PM

Quote:

Originally Posted by DiEzel

Thanks. Id like to get some video of mine so i CAN show just how good the lowspeed really is, It is REALLY REALLY Good. And the drag-brake works just as good as a brushed motor, if not better... I never was a big fan of brushless motor's in a crawler -this has changed my view entirely..

thanks so much for fast reply, i'm very interested of this set up..
now i run goat 3s with 18.5 and 20t pinion but i think you have much more wheelspeed..
i can't wait for videos

Cableman · 10-23-2011, 03:57 PM

That motor is on my mod list

along with almost picking the wraith kit up

You think the 3300 is perfect? They are coming out with a lower kv one also, wonder how that will compair to this one.
I like my 13.5t ballistic, i run the 13mm rotor and have the 14 on standby. Ran this in my scx10 with the dragbreak set to 213% i almost couldnt move it! 4 pole is still better

guidetti_angelo · 10-25-2011, 01:28 PM

sorry, did you make some tuning to fit 32pitch pinion and spur ? did you use stock axial motor mount..?
thanks
Angelo

DiEzel · 11-04-2011, 04:07 PM

Picked up a pair of Pro-Line's Slash front's to try out...

Harley · 11-04-2011, 04:30 PM

I'm still really liking mine. Glad I went to them. The stock springs are a good mix for speed and crawling.

DiEzel · 11-04-2011, 04:51 PM

Quote:

Originally Posted by Harley

I'm still really liking mine. Glad I went to them. The stock springs are a good mix for speed and crawling.

Thanks for the heads up, Was curious on your thoughts on the spring but wasn't gonna bother asking.. Ears musta been burnin.

frdtrkguy · 11-04-2011, 05:00 PM

My fav wraith

MAXIMUM777 · 11-04-2011, 05:20 PM

nice wraith lot of good ideas

k goodrich · 11-05-2011, 05:13 PM

wraith looks great. I have a idea about how to fix your bolts comming out of your beadlocks. Take a dab of silicon off a toothpick and place it on each bolt then screw it in the last few turns.

DiEzel · 11-05-2011, 07:56 PM

Quote:

Originally Posted by k goodrich

wraith looks great. I have a idea about how to fix your bolts comming out of your beadlocks. Take a dab of silicon off a toothpick and place it on each bolt then screw it in the last few turns.

My screw's aren't comin out bud... My tires are pulling out of the beadlocks.

. The wheels go back to VP next week.

10-25-2011, 01:28 PM	#73
guidetti_angelo Rock Crawler Join Date: Oct 2008 Location: Italy Posts: 544	sorry, did you make some tuning to fit 32pitch pinion and spur ? did you use stock axial motor mount..? thanks Angelo Last edited by guidetti_angelo; 10-25-2011 at 02:51 PM.

10-19-2011, 06:47 PM	#62
DiEzel RCC Addict Join Date: Oct 2008 Location: Alpine,CA Posts: 1,258	Got everything cleaned up a bit. Kinda stoked - Wraith took a swim Saturday and the receiver/BEC's were goin bonkers. Today - Everything worked minus the servo i knew was toast. Here's what you see.(Ignore the heatshrinkless -) Battery - Sky Lipo 4400mah, 3s LiPo. Balloon's content's includes: R614FF (4ch Receiver), Two Castle 10A BEC's, Axial's LED Controller and a whole mess of wires.

10-20-2011, 04:53 PM	#63
DiEzel RCC Addict Join Date: Oct 2008 Location: Alpine,CA Posts: 1,258	Ready for this weekend..

10-20-2011, 08:29 PM	#64
OntarioCrawler Quarry Creeper Join Date: Oct 2011 Location: Georgetown, On Posts: 345	Looks good! i just got my Goat system installed, LOVE it. find my servo works much better with it too. Id love to crawl this weekend, but i doubt ill get to it...

10-21-2011, 02:20 PM	#65
DiEzel RCC Addict Join Date: Oct 2008 Location: Alpine,CA Posts: 1,258	Hell yea..

10-21-2011, 03:19 PM	#66
OntarioCrawler Quarry Creeper Join Date: Oct 2011 Location: Georgetown, On Posts: 345	are you still running stock chubs?

10-23-2011, 02:58 PM	#69
guidetti_angelo Rock Crawler Join Date: Oct 2008 Location: Italy Posts: 544	compliments for your truck ;) listen, is tekin pro4 with MMP able to crawl or is it too fast, i didn't find any video that show a set up like your on scaler course.. thanks in advance Angelo

10-23-2011, 03:57 PM	#72
Cableman Quarry Creeper Join Date: Jul 2009 Location: Long Island Posts: 347	That motor is on my mod list along with almost picking the wraith kit up You think the 3300 is perfect? They are coming out with a lower kv one also, wonder how that will compair to this one. I like my 13.5t ballistic, i run the 13mm rotor and have the 14 on standby. Ran this in my scx10 with the dragbreak set to 213% i almost couldnt move it! 4 pole is still better

11-04-2011, 04:07 PM	#74
DiEzel RCC Addict Join Date: Oct 2008 Location: Alpine,CA Posts: 1,258	Picked up a pair of Pro-Line's Slash front's to try out...

11-04-2011, 04:30 PM	#75
Harley 20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time. Posts: 22,981	I'm still really liking mine. Glad I went to them. The stock springs are a good mix for speed and crawling.

11-04-2011, 05:00 PM	#77
frdtrkguy I wanna be Dave Join Date: Feb 2007 Location: BFE, NV Posts: 2,324	My fav wraith

Sponsored Links

11-04-2011, 05:20 PM	#78
MAXIMUM777 Rock Stacker Join Date: Jun 2007 Location: jonesborough Posts: 79	nice wraith lot of good ideas

11-05-2011, 05:13 PM	#79
k goodrich Rock Crawler Join Date: Apr 2009 Location: bend Posts: 897	wraith looks great. I have a idea about how to fix your bolts comming out of your beadlocks. Take a dab of silicon off a toothpick and place it on each bolt then screw it in the last few turns.

RCCrawler Forums

Thread: Another wraith.