About that time ( another spawn )

[big daddy smokes]

Messing around with this thing and lost a body pin and decided to use magnets for the hood. After a bit of messing around I got a few pieces of magnet in the tube chassis and a few on the hood. Going to keep the pins I have that go through (cuz there's holes there now) but over all this will work. I will probably bd looking for something stronger. But I'll put it to the test at The Crawl Space Friday night scale comp.

[big daddy smokes]

Well the hood it's self stayed shut but didn't stay intact. So I ended up cutting the front off and got a 3d printed grill from The Crawl Space. Now for some lights.

[big daddy smokes]

Got a werty made flat top stinger in the mail this morning. Got it all mounted with fair lead... Now back to needing more pix!!

[big daddy smokes]

So here is a look at the grill and werty made bumper. Both super nice need to add a little detail but liking the look.





Should have some tsl's from a trade and some more scale accessories. going to be a bit before I can do my c's and knuckles and growlers. But anything will prob do better then my ripsaws!

[big daddy smokes]

Got the tsl's on and some light buckets and grills. Axial metal splur and alu slipper pads... Won't be out to test for a month or so due to shoulder surgery.
But can get some pix uploaded.

[SCREAMER]

Nice setup BD. Where did you get the lower shock guards from?

[big daddy smokes]

Originally Posted by SCREAMER

Nice setup BD. Where did you get the lower shock guards from?

Those came on the shocks pro-line power strokes (slash rear) that I got from a member on here.

[SCREAMER]

Originally Posted by big daddy smokes

Those came on the shocks pro-line power strokes (slash rear) that I got from a member on here.

Hmmm. I need to find some for mine. They don't come in the package with the shocks.

[big daddy smokes]

So now it's time for knuckles and c's and can't decide between VP stage 1 or the VP scale set. Prob going with the scale because I'm not worried about the rear lock outs. I'll post when I finally get em.

[big daddy smokes]

So my wife noticed me looking at c's and knuckles and today I get a email from RPP saying "Your package has shipped... Black "scale knuckles and c's" and narow alu hexes! Bad A$$!!

[big daddy smokes]

A pic of how she sits waiting for me to get better

[big daddy smokes]

Had the body off and it got stepped on so I got sine "OG" wraith panels from a kit and am going to paint it like i changed the deadbolt hood.

[big daddy smokes]

want it like this, lookin all weathered

[altd896]

Originally Posted by SCREAMER

Nice setup BD. Where did you get the lower shock guards from?

I believe they're the RPM shock shaft guards
Black Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks | RPM R/C Products

[cole.urata12]

Originally Posted by big daddy smokes

there she is... with junaft shafts now

How are the junfac shafts


Sent from my LGMS769 using Tapatalk

[big daddy smokes]

]How are the junfac shafts


So far so good. I have done 2 comps and lots of bashing and they stood up to everything I have thrown at em ( hh brushless 3300 on 3s). The real test will be "scale adventure" on the 26th, roughly 3 hr event. I'll up date after that.

[SCREAMER]

Originally Posted by altd896

I believe they're the RPM shock shaft guards
Black Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks | RPM R/C Products

Awesome, thanks for the link!

[big daddy smokes]

turned out better then I thought

[big daddy smokes]

Got a comp spec light/fairlead really nice piece and s hardened axial 56t splur and Alu slipper pads. And redid my tire weights at 4 up front and 2.75 rear (oz)

[big daddy smokes]

I picked up a sweet little scale tote for "scale adventure items" instead of zip-tieing then to my rig. I can't wait till 7/26! I'm going to have to take it to scale comp @ "the crawl space" to give it a shake down.